54 1/8"
77 7/8"
38 1/4"
44 1/8"
OPTION 01
OPTION 02
ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product.
Be sure to check all packing materials carefully
for small parts which may have come loose inside the carton during shipment.
identify and count all parts and hardware.
Compare with the parts list to be sure all parts
are present.
“TO ALLOW FOR TOLERANCE DURING ASSEMBLY,
DO NOT FIRMLY TIGHTEN BOLTS & SCREWS UNTIL COMPLETELY ASSEMBLED”
SIZE OF MATTRESS AND FOUNDATION
Use only Twin or Full Mattress with the following specifications on upper & lower bunks
Twin Mattress :37 1/2” - 3 1/ ” Wide x 74”-75” long9 4
The total thickness of Mattress and Foudation shoud not exceed 8" inches.
Do not use mattress without proper safe foundation.
Separate,
SAFETY WARNINGS!
1-Follow the information on the warning label appearing on the upper bunk end structure and on the carton. Do
not remove warning label from bed.
2-Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood
of entrapment or falls.
3-Surface of mattress must be at least 5 inches below the upper edge of guardrails.
4-Do not allow children under 6 years of age to use the upper bunk.
5-Prohibit more than one person on upper bunk.
6-Periodically check and ensure that the guardrail, ladder and other components are in their proper posi-
tion, free from damage, and that all connectors are tight.
7-Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8-Always use the ladder for entering and leaving the upper bunk.
9-Do not use substitute parts. Contact distributor or dealer for replacement parts.
10-Use of a night light may provide added safety precaution for a child using the upper bunk.
11-If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should
be placed against the wall to prevent entrapment between the bed and the wall.
12-Always use guardrails on both long sides of the upper bunk.
13-The use of water or sleep flotation mattresses is prohibited.
14-Keep these instructions for future reference.
STRANGULATION HAZARD
Never attach or hang items to any part of the bunk bed that are not designed for use with
the bed. For example, but not limited to hooks, belts or jump ropes.
..Warning - On Beds with finials that can be configured as Bunk beds!
Effective on Bunk Beds manufactured on or after March 10th, 2008, finials cannot be used.
The finials provided with certain beds, which are part of the design of the bed, are to be
used only in one of the lower configuration - that is as a Twin, Full, Queen or King
configuration.
These finials are never to be used in the upper structure in a Bunk Bed configuration.
Using the finials in the upper structure of a Bunk Bed will create a strangulation hazard.
Never use finials in the upper structure of a Bunk Bed.
A flat Mushrrom Cap made to conform to the requirement is provided to take place of
finials in the upper structure in Bunk bed configurations.
In ts ct
I ts
r
r
u
tioc sn
oi snu
IMPORTANT: PLEASE READ INSTRUCTIONS BEFORE STARTING THE ASSEMBLY
PART LIST
93
60
13
13
13
14
09
15
63
06
94
09
09
10
10
05
15
58
16
11
13
13
26
62
17
17
25
24
17
BOX 1/2 BOX 2/2
2x
10
58 62
15
60 63
2x
24
25
26
05 06
16
14
09
17
3x
3x
11
94
93
13
5x
Environmental Responsibility
All wood used in our products comes from reforestation planted areas,
without use of native forest.
A
B
C
D
Structural screw
Parafuso estrutural
Tornillo estructural
Cylindrical nut
Porca cilíndrica
Tuerca cilíndrica
Structural screw
Parafuso estrutural
Tornillo estructural
Structural screw
Parafuso estrutural
Tornillo estructural
1/4 X 90
1/4
7 X 80
7 X 100
08
08
08
16
E
F
G
H
I
J
Wooden dowel / Cavilha / Taquete
Structural screw
Parafuso estrutural
Tornillo estructural
Flat head screw
P cabeça chataarafuso
Tornillo de cabeza plana
Allen key / Chave allen / Liave allen
Flat head screw
P cabeça chataarafuso
Tornillo de cabeza plana
Support
Soporte
Support
Ø10 X 40
7 X 50
4,0 X 30
3,5 X 16
34
12
46
01
16
02
1
2 3 4 5 6 7 8 9 10 1311 1412
1 2 3 4 5
01
E
10 x 40
34
E
E
E
E
E
E
13
x5
E
14
E
10
E
E
E
09
E
E
x2
16
x3
06
11
17
x3
E
E
E
E
05
02
D
D
D
D 08
7 x 100 Screw
14
13
63
H 01
13
14
Allen Key
13
D
D
D
60
D
H
D
03
D 08
7 x 100 Screw
D
D
H 01
Allen Key
D
04
D
58
A 08
1/4 x 90 Screw
11
13
B 08
1/4
13
16
C
62
D
D
D
D
H
06
7 x 80 Screw
H
H
C
C
A
A
A
A
H
A
A
B
B
B
B
B
B
09
09
09
06
05
H
B
B
Allen Key
B
B
01
C
C
A
A
A
A
C
OPTION 01
C
04.1
A 08
1/4 x 90 Screw
B 08
1/4
C
7 x 80 Screw
06
A
A
A
C
C
A
C
H
B
B
Allen Key
B
B
01
06
05
09
09
09
B
B
B
B
B
B
A
A
H
A
A
H
H
C
C
A
A
OPTION 02
05
C
7 x 80 Screw
H
C
C
02
H
Allen Key
C
01
10
10
OPTION 01
05.1
OPTION 02
C
7 x 80 Screw
02
10
10
H
Allen Key
01
C
H
C
06
F
7 x 50 Screw
H
04
F
H
Allen Key
01
26
OPTION 01
07
F
7 x 50 Screw
06
H
Allen Key
01
F
08
F
F
F
7 x 50 Screw
H
F
02
17
24
H
17
Allen Key
17
01
F
25
G 01
4.0 x 30 Screw
F
G
H
F
F
G
OPTION 01
09
G
4.0 x 30 Screw
06
G
G
G
15
36 3/4"
15
G
G
OPTION 01
29 1/2"
G
10
I
I
I
OPTION 01
I
J
I
I
I
3.5 x 16 Screw
12
J
02
J
J
11
I
I
94
3.5 x 16 Screw
04
94
OPTION 01
I
12
G
4.0 x 30 Screw
39
G
G
!
The first slat must ser fixed
here at 2 1/2" each headboard end.
max
178 lbs
93
2 1/2"
93
!
Install slat Kit with spacer
tape on top ( Facong up).
G
G
93
OPTION 01
Loading...