IRTrans Ethernet, Ethernet PoE Hardware Manual

Hardware Guide

Ethernet - Ethernet PoE

Version 2013.02

Hardware Guide Ethernet - Ethernet PoE

EG Declaraon of Conformity

The following products

are conrmed to comply with

DIN EN 55024: 1998 + A1: 2001 + A2: 2003.

IRTrans Ethernet / IRDB

IRTrans Ethernet PoE / IRDB / IO

2

©2012 IRTrans GmbH

Hardware Guide Ethernet - Ethernet PoE

Contents

1. IRTrans Ethernet ......................................................................... 4

1.1 Connections ..................................................................................... 4

1.2 Power supply .................................................................................... 5

2. IRTrans Ethernet PoE ................................................................. 6

2.1 Connections ..................................................................................... 6

2.2 Power supply .................................................................................... 7

3. Ethernet interface ....................................................................... 8

4. External transmitters .................................................................. 9

4.1 stick on minitransmitters ................................................................... 9

4.2 external high power transmitters ...................................................... 9

4.3 Devices with 2X option ..................................................................... 10

5. Connecting external IR receivers.............................................. 10

6. RS232 interface ........................................................................... 10

7. Start-Up ........................................................................................ 11

8. Webinterface ............................................................................... 12

9. Reset to factory defaults ............................................................ 15

© 2012 IRTrans GmbH

3

Hardware Guide Ethernet - Ethernet PoE

1. IRTrans Ethernet

The IRTrans Ethernet is an IR Transceiver with network interface.

Basic features are:

 Receive an transmit IR

 1 output fo external IR transmitter

 1 input for external IR receivers

 10/100 MBit network interface

 Webinterface for configuration

IRTrans devices with the optional IR database offer additionally:

 128k IR database (sufficient for approx. 1000-1500 IR commands)

 Use withour IRServer

 128k flash memory for own html pages

IRTrans devices with the optional 2X option:

 2nd independent IR output (stereo jack output)

1.1 Connections

On the back there are:

IRTrans Ethernet back

 Ethernet connector

 5,5/2,1mm connector for power supply

 Output for external IR transmitters

On the front there are 4 IR LEDs, 1 IR receiver and a 3,5mm jack to connect ex­ternal IR receivers.

4

©2012 IRTrans GmbH

Hardware Guide Ethernet - Ethernet PoE

1.2 Power supply

The IRTrans Ethernet is powered by an external power supply. It must deliver 8-

16V and 300mA per IRTrans device. The positive lead is wired to the center ter-

minal of the 5,5/2,1mm hollow connector.

A 5,5/2,5mm connector may fit as well but will not have reliable contact.
The IRTrans will encounter seemingly inexpliccable reboots.

When using external high power transmitters the power supply should be
capable of delivering 500mA.

© 2012 IRTrans GmbH

5