SRL-6056-S User Manual
PART I GENERAL INFORMATION
1 Introduction
Thank you very much for purchasing the SRL-6056S, our High Power LED Par Lamp series
product. To assure reliable performance it designed to, please read the instructions in this manual
thoroughly and carefully before application.
2 Safety Information
The following definitions of identifying the severity of the hazards associated with the products
are used:
“DANGER” Imminently hazardous situation which, if not avoided, will cause death or serious
injury.
“WARNING” Potentially hazardous situation which, if not avoided, could cause death or serious
injury.
“CAUTION” Potentially hazardous situation which, if not avoided, may cause minor or
moderate injury or property damage. In addition, it uses to alert against unsafe
practice.
“CAUTION” If the external flexible cable or cord of this luminaire is damaged,it shall be
exclusively replaced by the manufacturer of his service agent or a similar
qualified person in order to avoid a hazard
IGNORING A HAZARD WILL V OID ANY WARRANTY.
DANGER: Ensure that the fixture is disconnected from the main power before performing
any type of service or any cleaning procedure.
WARNNING: No serviceable parts inside the fixture, do not attempt to open it.
WARNNING: The Installation must be performed by qualified professional in accordance with
related local codes.
WARNNING: Do not attempt to operate the fixture before read and understand the installation
instructions and safety labels.
CAUTION: Do not modify, alter, or attempt to service the SRL-6056S
CAUTION: Do not lengthen the cable of SRL-6056S unless authorized by technicians of
NEO-NEON.
CAUTION: Always ground (earth) the fixture electrically.
CAUTION: Refer all service to a qualified technician.
CAUTION: When suspending the fixture above ground level, verify that the structure can
hold at least 10 times the weight of all installed devices.
3
PY-S242005