IRP DWCS2.4 User Manual

dwcs2.4 wireless digital

conference system

User Manual

Copyright  2000 IRP professional sound products L.P.

All rights reserved. No part of this manual may be reproduced in any form (printing,
photocopy, microfilm, or other procedures) without written permission of IRP
professional sound products L.P. or processed or multiplied using electronic systems.

Seite 2

Contents:

General Description 3
FCC Certification 5
CE 6
Possible System and Delivery Configuratíons 7
Main Unit 9
Microphone Stations 14

Carrying Case with integrated Battery Charger
Connections

Technical Specifications

FCC Information

FCC ID: O8O-DWCS24-SYS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference receive d, including interference that may cause undesired operation. In
accordance with FCC requirements, changes or modifications not expressly approved by IRP
professional sound products, LP could void the user’s authority to operate this product.

Seite 3

dwcs2.4 Digital Wireless Conference System

System Description

dwcs2.4 is a new wireless conference
system, developed by „IRP professional
sound products", which operates in the
2,4GHz range. The data and audio
transfer is full digital and all audio
signals are digitally encoded. The
changing digital signal encoding makes
an unwanted hearing of the spoken
words practically not possibly. (hearing
security is the fundamental problem of
all wireless conference systems, since
these units use the UHF analog audio
transmission. With an accordingly
equipped UHF device it is easily possible
to receive the discussions of a
confidential conference in a neighbouring
space.)

A further considerable advantage is the
circumstance that the signal

transmission is
licence- free in the
2,4GHz range. Thus a
local installation or a

mobile system used
at different locations is very simplified.
The installation and the operation of the
devices are comparatively simple. Except
the connections of the antennas and the
power cord no further cables are
necessary. The installation of the two
antennas is also likewise problem- free
and easy. The microphone stations are
carried in a special carrying case with
integrated battery charger and are
immediately ready for use.

Front View of the Main Unit

Changes to improve the design or performance are reserved.

Seite 4

Being connected to the world is NOT always what you want ..

the dwcs2.4 with digital encoding gives you full privacy when you need it!

100% Privacy - Licence-free

Seite 5

FCC Certification

This equipment has been tested and found comply with the limits for class A digital
device, pursuant to Part 15 of the FCC rules.

Seite 6

CE

Seite 7

Possible System and Delivery Configurations

A:

one Mainframe,
one Audio Board,
one Controller Board,
one Antenna Splitter Board 2x 1in4,
seven SMA Antenna Patch Cables (prewired),
one Controller Patch Cable (prewired),
two Antenna Cables (N- Steckverbinder),
two Antenna Cable Adapters (N- Connector to SMA Connector) for furniture installation,
two Antennas 2,4GHz (SMA- Connector),
the appropriate number of regular Microphone Stations,
one Chairman Microphone Station,
one (two) Carrying Cases with integrated battery charger (12 Microphone Stations each,
two cases combined to one carrying and changer unit).

B:

two Mainframes,
two Audio Boards,
one Controller Board,
two Antenna Splitter Boards 1x 1in8,
one blind panel,
eleven SMA- Antenna Patch Cables (prewired),
two Controller Patch Cables (prewired),
two Antenna Cables (N- Connector),
two Antenna Cable Adapters (N- Connector to SMA-Connector) for furniture installation
two Antennas 2,4GHz (SMA- Connector),
the appropriate number of regular Microphone Stations,
one Chairman Microphone Station,
one (two) Carrying Cases with integrated battery charger (12 Microphone Stations each,
two cases combined to one carrying and changer unit).

C:

the appropriate number of Microphone Stations as single units,
single Battery Chargers for the Microphone Stations (no carrying case with integrated
battery charger),
one or two Mainframes inclusive Boards, Cabling and Antennas as described above.