Irori 6001001753159, 7117082, CO2061 Instruction Manual

INSTRUCTION MANUAL

CAN OPENER

MODEL: 7117082 (CO2061) EAN: 6001001753159

INDOOR HOUSEHOLD USE ONLY

Please save and read this instruction manual carefully before use

1

ENGLISH

INTRODUCTION

Thank you for purchasing our “Platinum” Can Opener. Each unit has been
manufactured to ensure safety, reliability, and ease of use. Before use,
please read these instructions carefully and save them for future reference.

IMPORTANT SAFEGUARDS

When using your “Platinum” Can Opener, basic precautions should always
be followed, including the following:

! This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and
knowledge concerning the use of this product, unless they are supervised
or have been given instruction concerning use of the appliance by a
person responsible for their safety.

! Children should be supervised to ensure that they do not play with the

appliance.

! Always ensure that the voltage on the rating label corresponds to the

voltage in your home.

! Check the power cord and plug regularly for any damage. If the cord or the

plug is damaged, it must be replaced by the manufacturer or a qualified
person in order to avoid an electrical hazard.

! This appliance is intended for household use only. Industrial or commercial

use will void the warranty, and the supplier can not be held responsible for
injury or damage caused when using the appliance for any other purpose
than that intended.

! Incorrect operation and improper use can damage the appliance and

cause injury to the user.

! Do not use the appliance if it has been dropped or damaged in any way.

In case of damage, take the unit in for examination and/or repair by an
authorized service agent.

! To reduce the risk of electric shock, do not immerse or expose the motor

assembly, plug or the power cord to water or any other liquid.

! Never immerse the unit in water or any other liquid for cleaning purposes.
! Remove the plug from the socket by gripping the plug. Do not pull on the

cord to disconnect the appliance. Always unplug the unit when not in use,
before cleaning or when adding or removing parts.

! The use of accessory attachments that are not recommended or supplied

by the manufacturer may result in injuries, fire or electric shock.

! Do not let the cord hang over the edge of a table or counter. Ensure that

the cord is not in a position where it can be pulled on inadvertently.

2

ENGLISH

! Do not allow the cord to touch hot surfaces and do not place on or near a

hot gas or electric burner or in a heated oven.

! Use of an extension cord with this appliance is not recommended.

However, if it is necessary to use an extension lead, ensure that the lead is
suited to the power consumption of the appliance to avoid overheating of
the extension cord, appliance or plug point. Do not place the extension
cord in a position where it can be pulled on by children or animals or
tripped over.

! This appliance is not suitable for outdoor use. Do not use this appliance for

anything other than its intended use.

! Do not carry the appliance by the power cord.
! Do not touch hot surfaces directly. Use handles or knobs.
! Do not leave this appliance unattended during use. Always unplug the unit

when not in use. Allow it to cool before putting on or taking off parts, and
before cleaning the appliance.

! Always operate the appliance on a smooth, even and stable surface. Do

not place the unit on a hot surface.

! The manufacturer does not accept responsibility for any damage or injury

caused by the improper or incorrect use of the appliance, or by repairs
carried out by unauthorized personnel.

! In case of technical problems, switch off the machine and do not attempt to

repair it yourself. Return the appliance to an authorized service facility for
examination, adjustment or repair. Always insist on the use of original
spare parts. Failure to comply with the above mentioned precautions and
instructions, could affect the safe operation of this machine.

! This appliance is intended to be used in household and similar applications

such as:

-Staff kitchen areas in shops, offices and other working environments;

-Farm houses;

-By clients in hotels, motels and other residential type environments;

-Bed and breakfast type environments.

! Avoid contacting moving parts.
! Unplug from outlet when not in use, before putting on or taking off parts,

and before cleaning.

! Do not open pressurized (aerosol type) cans.
! Do not open cans of flammable liquids such as lighter fluid.

3

ENGLISH

KNOW YOUR CAN OPENER

1. Can Opener

Lever

2. Press on Button

3. Magnet

4. Drive Wheel

5. Bottle Opener

6. Locating Post

7. Blade

8. Front Housing

9. Back Housing

10. Blade

Sharpener

11. Cord Storage

SPECIFICATIONS

Voltage

:

230V~ 50Hz

Wattage

:

60W

Cord

:

2 round pins plug

4

ENGLISH

USING YOUR CAN OPENER

Before first use, please follow these instructions:

1. Remove all packaging and any labels,

2. Cleaning all parts, such as the Lever, drive wheel, bottle opener and so
on completely.

TO USE YOUR CAN OPENER

You can use your Can Opener to open cans, open bottles and sharpen
knives.

TO OPEN CANS

1. To attach the Lever to the Can Opener, make the key tabs align with the
key slots, push it frontward to fix it (see Fig. 1), then press down the
Lever to ensure it has been assembled in place (see Fig. 2).

2. Plug cord into electrical outlet.

3. Lift the Lever, tip the can so that the rim is under the locating post, the lid
of the can will be sucked by magnet, then press down the Lever, making
sure the blade is inside the rim (see Fig. 3). Drive wheel will actuate the
can to rotate and the blade will cut the can lid open. Because of the
hands-free feature, it is not necessary to hold the Lever down or support
the can during cutting.

NOTE: The can required to be opened 50mm to 100mm in diameter
and 178mm max in height. In the case when total weight of can is
over 510g, it is necessary to hold the Can Opener Body to avoid
overturning.

4. When the can is opened, the Can Opener will stop automatically. To
remove the can, hold it with one hand and raise the Lever with the other.

CAUTION: Avoid contact with the cut edges of the can or lids as
they are sharp, carefully remove the lid from the magnet and
discard.
NOTE: The time of opening cans continuously do not exceed 1
minute.

5. The excess cord can be stuffed into cord storage at the back of the unit,
and feed the cord through the notch for convenient storage.

5

ENGLISH

CAN OPENING TIPS

1. This Can Opener should not be used to open cans designed to open by
another method, such as a pull tab, peel-off foil seal, or rolling key. This
can opener will not be used to open rimless cans or cans with angled
corners.

2. If there is a dent in the rim of a can, open the other end or start the cutting
action just beyond the dent. Cans with heavy seams, uneven rims or odd
shapes may cause the Can Opener to stall. If this occurs, turn the can
slightly by hand to aid the cutting action.

3. Frozen juices or foods in cardboard cans should be opened as soon as
they are removed from the freezer. Aluminum lids will not be sticked to
the magnet.

TO OPEN BOTTLES

Before opening bottles, unplug the power supply
firstly.

1. To open a bottle, grasp it and position the
cap under the metal “hook” in the bottle
opener (see Fig. 4).

NOTE: Be sure the “hook” is not under the
bottle neck or the glass may break. Hold the
Can Opener with one hand and pull down to
pop the cap off with the other one.

2. The bottle opener at the front of the unit will
only remove metal bottle caps. Do not use it
for the bottle with screw-off cap or pull rings.

KNIFE SHARPENING TIPS

1. Clean and dry knives before sharpening.

2. Do not attempt to sharpen serrated blades, as this will smooth their edges.

3. Do not attempt to sharpen scissors.

6

ENGLISH

TO SHARPEN KNIVES

Unplug the power supply firstly, and then place the
knife which is intended to be sharpened in the slot of
knife sharpener at the back of the unit. For best
results, sharpen the entire length carefully to pull the
knife through the slot back and forth (see Fig. 5), until
desired sharpness achieved. After sharpening, wash
and dry the knife.

NOTE: Be cautious with blade after
sharpening.

CLEANING AND MAINTENANCE

1. Before cleaning any part of the Can Opener, unplug the cord.

2. If the Can Opener is in contact with food, remove the Lever for easy

cleaning, lift the Lever up and pull it out. The blade assembly can be
cleaned with a damp cloth, then wiped with a sponge and dried thoroughly.
It is not dishwasher-safe component. Reverse the procedure to replace the
Lever.

3. Before replacing the Lever, wipe the Can Opener housing, and area

around the drive wheel with a slightly damp cloth or sponge. To remove
stubborn spots, wipe surfaces with nylon or mesh pad and sudsy water.
Follow with a clean, damp cloth. Do not use abrasive cleaners on any part
of the Can Opener as they can damage the finish.

4. Do not immerse main part of Can Opener into water as this would give rise

to electric shock.