Ironton 57524 Owner's Manual

READ & SAVE THESE INSTRUCTIONS

18V Li-Ion Cordless Chainsaw Sharpener

Owner’s Manual

WARNING: Read carefully and understand all ASSEMBLY AND OPERATION

INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
precautions may result in serious personal injury.

Item #57524

Page 2 of 18

Thank you very much for choosing an Ironton™ product!

For future reference, please complete the owner’s record below:

Serial Number/Lot Date Code: ________________________________

Purchase Date: ____________________________________________

Save the receipt, warranty, and this manual. It is important that you read
the entire manual to become familiar with this product before you begin
using it.

This sharpener is designed for certain applications only. Northern Tool
and Equipment is not responsible for issues arising from modification or
improper use of this product such as an application for which it was not
designed. We strongly recommend that this product not be modified
and/or used for any application other than that for which it was designed.

For technical questions, please call 1-800-222-5381.

Page 3 of 18

Table of Contents

Intended Use .......................................................................................................................................... 4

Technical Specifications ...................................................................................................................... 4

Important Safety Information ............................................................................................................... 4

Specific Operation Warnings ............................................................................................................... 6

Grounding .............................................................................................................................................. 7

Extension Cords .................................................................................................................................... 8

Main Parts of Sharpener ....................................................................................................................... 8

Assembly Instructions .......................................................................................................................... 9

Before Each Use .................................................................................................................................... 9

Operating Instructions .......................................................................................................................... 9

After Each Use ..................................................................................................................................... 13

Maintenance ........................................................................................................................................ 13

Troubleshooting .................................................................................................................................. 14

Parts Diagram ...................................................................................................................................... 15

Parts List .............................................................................................................................................. 16

Replacement Parts .............................................................................................................................. 16

Limited Warranty ................................................................................................................................. 17

Page 4 of 18

Intended Use

The Ironton 18 Volt Li-Ion Cordless Chainsaw Sharpener is designed for sharpening chainsaws.

Technical Specifications

Property

Specification

Motor power supply

18 V DC

Idle speed

6500 min-1

Battery charger output voltage:

21 V DC

Battery charger output current

3 A

Charging unit supply voltage

110V~ 60Hz

Battery type

Li-Ion

Adjustment angle

35° to the left and right

Grinding wheel Ø (inside)

23 mm

Grinding wheel Ø (outside)

Max. 108 mm

Grinding wheel thickness

3.2 mm

Weight

3.75 Lb.

Important Safety Information

⚠WARNING

 Read and understand all instructions. Failure to follow all instructions may result in serious injury

or property damage.

 The warnings, cautions, and instructions in this manual cannot cover all possible conditions or

situations that could occur. Exercise common sense and caution when using this tool. Always be

aware of the environment and ensure that the tool is used in a safe and responsible manner.

 Do not allow persons to operate or assemble the product until they have read this manual and

have developed a thorough understanding of how it works.

 Do not modify this product in any way. Unauthorized modification may impair the function and/or

safety and could affect the life of the product. There are specific applications for which the product

was designed.

 Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger

industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use

this equipment for a purpose for which it was not intended.

 Industrial or commercial applications must follow OSHA requirements.

⚠WARNING

WORK AREA SAFETY

 Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.

Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas

may put you dangerously close to cutting tools and rotating parts.

Page 5 of 18

 Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence

of flammable liquids, gases, or dust. The product can create sparks, which may ignite the

flammable liquids, gases, or dust.

 Do not allow the product to come into contact with an electrical source. The tool is not insulated

and contact will cause electrical shock.

 Keep children and bystanders away from the work area while operating the tool. Do not allow

children to handle the product.

⚠WARNING

PERSONAL SAFETY

 Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use

the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of

inattention while operating the tool may result in serious personal injury.

 Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving

parts. Air vents on the tool often cover moving parts and should be avoided.

 Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant safety

goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in

dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems,
and hearing protection when appropriate. This applies to all persons in the work area.

 Do not overreach. Keep proper footing and balance at all times.
 Remove keys or wrenches before connecting the tool to an air supply, power supply, or turning on

the tool. A wrench or key that is left attached to a rotating part of the tool may cause personal

injury.

 Secure the work with clamps or a vise instead of your hand when practical. This safety precaution

allows for proper tool operation using both hands.

⚠CAUTION

SHARPENER USE AND CARE

 Do not force the sharpener. Products are safer and do a better job when used in the manner for

which they are designed. Plan your work, and use the correct product for the job.

 Check for damaged parts before each use. Carefully check that the product will operate properly

and perform its intended function. Replace damaged or worn parts immediately. Never operate the

product with a damaged part.

 Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with

the power switch is dangerous and must be repaired by an authorized service representative

before using.

 Disconnect the power/air supply from the product and place the switch in the locked or off position

before making any adjustments, changing accessories, or storing the tool. Such preventive safety

measures reduce the risk of starting the tool accidentally.

Page 6 of 18

 Store the sharpener when it is not in use. Store it in a dry, secure place out of the reach of

children. Inspect the tool for good working condition prior to storage and before re-use.

 Use only accessories that are recommended by the manufacturer for use with your product.

Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than

the tool itself.

 Keep guards in place and in working order. Never operate the product without the guards in place.
 Do not leave the tool running unattended.

Specific Operation Warnings

⚠WARNING

FOR SHARPENER

 Wear ANSI Z87.1 compliant safety goggles.
 Do not use grinding wheels that have a max RPM less than the marked RPM rating on the tool.
 Keep hands clear from grinding wheel during use.
 Electric shock hazard. Do not expose to rain or use in damp locations.
 Do not use for wet grinding.
 Do not use wheel if cracked or chipped.
 Not for use by or around children.
 Disconnect tools before servicing; when changing accessories, such as blades, bits, cutters, and

the like.

 Reduce the risk of unintentional starting. Make sure switch is in off position before plugging in.
 Direction of feed. Feed work into a blade or cutter against the direction of rotation of the blade or

cutter only.

 Always remove the battery pack before making adjustments to the equipment.
 Remove the battery each time before cleaning.
 Do not actuate the On/Off switch any more if the protective circuit has tripped. This may damage

the battery.

FOR GRINDING DISC

 Do not exceed rated speed.
 Always wear the proper personal protective equipment including eyewear, ear protection, and

facemasks.

 Do not use if wheel is damaged.
 Do not overtighten mounting nut.
 Always ensure the appropriate guards are installed.
 Store out of reach of children.