Ironton 50098 Owner's Manual

115 VOLT TRANSFER PUMP

Owner’s Manual

INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

Item #50098

precautions may result in serious personal injury.

WARNING: Read carefully and understand all ASSEMBLY AND OPERATION

SAVE THESE INSTRUCTIONS

Thank you very much for choosing an Ironton product!

For future reference, please complete the owner’s record below:

Serial Number/Lot Date Code: ________________________________

Purchase Date: ____________________________________________

Save the receipt, warranty, and this manual. It is important that you read

This pump is designed for certain applications only. Northern Tool and

For technical questions, please call 1-800-222-5381.

the entire manual to become familiar with this product before you begin
using it.

Equipment cannot be responsible for issues arising from modification or
use of this product in an application for which it was not designed. We
strongly recommend that this product not be modified and/or used for
any application other than that for which it was designed.

Page 2 of 17

Table of Contents

Intended Use .......................................................................................................................................... 4

Technical Specifications ...................................................................................................................... 4

Important Safety Information ............................................................................................................... 4

Specific Operation Warnings ............................................................................................................... 7

Grounding .............................................................................................................................................. 8

Extension Cords .................................................................................................................................... 9

Assembly ............................................................................................................................................. 10

Before Each Use .................................................................................................................................. 10

Operating Instructions ........................................................................................................................ 11

After Each Use ..................................................................................................................................... 13

Maintenance ........................................................................................................................................ 13

Parts Diagram ...................................................................................................................................... 14

Parts List .............................................................................................................................................. 14

Troubleshooting .................................................................................................................................. 15

Replacement Parts .............................................................................................................................. 15

Limited Warranty ................................................................................................................................. 16

Page 3 of 17

Intended Use

• Read and understand all instructions. Failure to follow all instructions may result in serious injury.

This pump is designed to easily transfer water from one point to another using standard 115V
household outlet power. Typical applications include removing water from basements, pool covers,
clogged drains, stock tanks, water basins, boats, etc.

Technical Specifications

Property Specification

Power 115VAC, 60 Hz
Amperage 5 – 15 amps
Discharge Connection 3/4 in. garden hose thread connect ion
Discharge Hose Needed 5/8 in. or larger discharge garden hose
Weight 7 lbs.
Max. Head (ft .) 46 ft.
Max. Flow Rate (GPH) 298 GPH

Important Safety Information

• The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.

• DO NOT allow persons to operate or assemble this product until they have read this manual and
have developed a thorough understanding of how the product works.

• DO NOT modify the product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.

• Use the right tool for the job.DO NOT attempt to force a small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
do the job better and more safely at the capacity for which it was intended. DO NOT use this
equipment for a purpose for which it was not intended.

• Industrial or commercial applications must follow OSHA requirements.

Page 4 of 17

WORK AR EA SAFE TY

PERSONAL S AFETY

• This product may contain chemicals known to the State of California to cause cancer, birth
defects or other reproductive harm.

• Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit.
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas
may put you dangerously close to other cutting tools and rotating parts.

• Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the
presence of flammable liquids, gases, or dust. The product can create sparks, which may ignite
the flammable liquids, gases, or dust.

• Do not allow the product to come into contact with an electrical source. The tool is not insul ate d
and contact will cause electrical shock.

• Keep children and bystanders away from the work area while operating the tool. Do not allow
children to handle the product.

• Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your
work area. Some of these hazards may be hidden from your view and may cause personal injury
and/or property damage if contacted.

• Stay alert, watch what you are doing, and use common sense when operating the tool. Do not
use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment
of inattention while operating the tool may result in serious personal injury.

• Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving
parts. Air vents on the tool often cover moving parts and should be avoided.

• Wear the proper personal protective equipment when necessary. Wear ANSI Z87.1 compliant
safety goggles or safety glasses with side shields, or when needed, a face shield. Use a dust
mask in dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection
systems, and hearing protection when appropriate. This applies to all persons in the work area.

• Do not overreach. Keep proper footing and balance at all times.

• Do not use the tool when tired or under the influence of drugs, alcohol or medication.

• Ensure the power switch is off prior to plugging in the tool.

• Remove keys or wrenches before connecting the tool to an air supply, power supply, or turning on

the tool. A wrench or key that is left attached to a rotating part of the tool may cause personal
injury.

• Secure the work with clamps or a vise instead of your hand when practical. This safety precaution
allows for proper tool operation using both hands.

Page 5 of 17

ELECTRIC AL S AFETY

• Grounded tools must be plugged into an outlet properly installed and grounded in accordance

PUMP USE AND CARE

with all codes and ordinances. Never remove the grounding prong or modify the plug in any way.
Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded. If the tools should electrically malfunction or break down,
grounding provides a low resistance path to carry electricity away from the user.

• Double insulated tools are equipp ed with a pol ar ized p lug (one bl ade is wider than the other) . This
plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change
the plug in any way. Double insulation eliminates the need for the three wire grounded power cord
and grounded power supply system.

• Do not allow the product to come into contact with an electrical source. The tool is not insulated
and contact will cause electrical shock.

• Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is grounded.

• Do not abuse the power cord. Never use the power cord to carry the pump or pull the plug from
an outlet. Keep the power cord away from heat, oil, sharp edges, or moving parts. Replace
damaged power cords immediately. Damaged power cords increase the risk of electric shock.

• When operating a power tool outside, use an outdoor extension cords marked “W-A” or “W”.
These extension cords are rated for outdoor use, and reduce the risk of electric shock.

• Do not force the pump. Pumps do a better and safer job when used in the manner for which they
are designed. Plan your work, and use the correct product for the job.

• Check for damaged parts before each use. Carefully check that the pump will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate
the pump with a damaged part.

• Do not use a pump with a malfunctioning switch. Any pump that cannot be controlled with the
power switch is dangerous and must be repaired by an authorized service representative before
using.

• Disconnect the power/air supply from the pump and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.

• Store the pump when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.

• Use only accessories that are recommended by the manufacturer for use with your pump.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure
than the tool itself.

• Keep guards in place and in working order. Never operate the product without the guards in
place.

Page 6 of 17