Ironton L-9001, L-9002, 29278, 29276 Owner's Manual
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating.
Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
L9002
(29276)
L9001
(29278)
PORTABLE HALOGEN
WORK LIGHT
OWNER’S MANUAL
Thank you very much for choosing an IRONTON product! For future reference, please complete the
owner’s record below:
Model: L-9001 (29278) L-9002 (29276) Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to
become familiar with this product before you begin using it.
This work light is designed for certain applications only. The distributor cannot be responsible for issues
arising from modication. We strongly recommend this work light not be modied and/or used for any
application other than that for which it was designed. If you have any questions relative to a particular
application, DO NOT use the work light until you have rst contacted the distributor to determine if it
can or should be performed on the product.
For technical questions please call 1-800-561-4321.
READ ALL INSTRUCTIONS – WARNING:
When portable xtures are used outdoors basic safety precautions should always be followed to
reduce the risk of re, electric shock and personal injury, including the following:
A. Use only three wire outdoor extension cords that have three prong grounding plugs and ground
receptacles that accept the appliance’s plug.
B. Ground fault circuit interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to
be used for the wet location portable xture.
C. Use only with extension cord rated for outdoor use, such as an extension cord type SW, SOW, STW,
STOW, SJW, SJOW,SJTW, SJTOW, SJEOW, SEOW
IMPORTANT SAFETY INSTRUCTIONS FOR HALOGEN WORKLIGHTS
• Always wear safety glasses when working in close proximity of the oodlight while energized, or
when xture is o and you are replacing the bulb.
• Keep xture 18 inches from combustible materials such as cloth, wood or paper. Lighted xture gets
hot! This xture should not be used inside dwelling.
• Do not look directly at lighted bulb. Do not remain in bright light if skin feels warm as you are too
close to the xture.
• Keep xture away from children.
• When replacing the bulb in this xture always turn o and give ample time for lamp to cool. Also
unplug xture from power source. Do not touch the bulb with your ngers as oil from your skin will
damage the bulb and greatly shorten bulb life. Always close face of xture securely before turning
power back on.
• Never operate the xture with missing glass safety shield or safety grill.
• This xture is not intended for use nor safe to use in potentially dangerous locations such as places
with explosive or ammable atmospheres.
• Do not handle this xture when standing on wet or damp surfaces or in water. To reduce the risk of
electrical shock, this light should always be plugged into a properly grounded 3 wire outlet. Do not
remove the ground wire or grounded plug from the xture. Always use a UL listed 3 wire grounded
cord with electrical capacity to properly handle this light and other tools you might be using. Never
use light around swimming pool, hot tubs or saunas.
• Never use around heavy volatile uids such as gasoline.
• Never use bulb larger than the xture is rated for as xture will get too hot and unsafe to use.
• When an extension cord is used with this light, the maximum cord length shall not exceed 50 feet
(15.2 m) from where the cord exits the light to the receptacle.
WARNING: GRILL MUST BE INSTALLED ON WORK LIGHT BEFORE OPERATION
WARNING – THIS FIXTURE GETS VERY HOT!!!
Never use this xture without the safety grill in place. The safety wire grill provides protection in the event that the xture tips over and also protects against someone touching the hot
safety glass.
Never use this xture around children. Do not use around combustible materials or
ammable atmospheres such as gasoline or ammable paints.
Loading...