Ironclad GC55-LG Assembly Instructions And Owner's Manual

ADJUSTABLE BASKETBALL SYSTEM

MODEL: GC55-LG

ASSEMBLY INSTRUCTIONS AND OWNER'S MANUAL

IRONCLAD SPORTS, INC
902 Corey Road, Hutchinson, KS 67501
Telephone: [phone]
www.ironcladsports.com

IRONCLAD SPORTS , INC
GAME CHANGER

Keep this instruction manual in case you have to contact the manufacturer for replacement parts.

!

!

WARNING

FAILURE TO COMPLY WITH ANY OF
THE WARNINGS IN THESE INSTRUCTIONS
MAY RESULT IN SERIOUS PERSONAL
INJURY.

FAILURE TO COMPLY MAY ALSO
RESULT IN PROPERTY DAMAGE.
PLEASE HEED ALL WARNINGS AND
CAUTIONS TO ENSURE YOUR SAFETY.

DO NOT ATTEMPT TO ASSEMBLE
THIS SYSTEM WITHOUT CAREFULLY
READING AND FOLLOWING ALL
INSTRUCTIONS. BEGIN BY IDENTIFYING
AND TAKING INVENTORY OF ALL PARTS
USING THE PARTS LIST PROVIDED.

(1 piece pole)

FAILURE TO DO THESE WARNINGS

MAY RESULT IN SERIOUS INJURY

AND/OR PROPERTY DAMAGE.

Owner must ensure that all players know

and follow these rules for safe operation

of the system.



Only hang from the rim briefly to regain

balance or avoid injuring others.

Release the rim as soon as possible

safely.



During play, especially when

performing dunk type activities, keep

palyer’s face away from the backboard,

and net. Serious injury could occur if

teeth/face come in contact with

backboard, rim, or net.



Do not slide, climb, or play on pole.



When adjusting height, keep hands

and fingers away from moving parts.



Do not allow children to adjust system.



During play, do not wear jewelry (rings,

watches, necklaces, ets.) Objects may

entangle in net.



Keep water and organic material away

from pole. Pole can rust and fail.



Check pole and all metal parts

regularly for rust. completely remove

rust and repaint with exterior enamel. if

rust has penetrated any steel parts,

replace that part immediately.



Check system before each use for

loose hardware, signs of rust and

instability. Repair before each use.

Never play on damaged equipment.



Wear a mouthguard when playing to

avoid dental injuries.

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN

SERIOUS INJURY AND/OR PROPERTY DAMAGE.

FAILURE TO DO THESE SAFETY INSTRUCTIONS MAY RESULT IN

SERIOUS INJURY, PROPERTY DAMAGE AND WILL VOID WARRANTY.

Owner must ensure that all players know and follow these rules for safe

operation of the system.

To ensure safety, do not attempt to assemble this system without

following the instructions carefully. Proper and complete assembly, use

and supervision is essential for proper operation and to reduce the risk of

accident or injury. A high probability of serious injury exists if this system

is not installed, maintained, and operated properly.



If use a ladder during assembly, use extreme caution.



4 people are recommended for this operation.



Seat the pole sections properly (if applicable). Failure to do so could

allow the pole sections to separate during play.



Before digging, contact utility company to locate underground power

cables, gas and water lines. Ensure there are no overhead power

lines within 20 ft. (7m) radius of pole location.



Climate, corrosion or misuse could result in system failure.



If technical assistance is required, contact us:

2

3

I

A

C

D

E

F

G

H

I

J

L

Note: GC55-MD comes without backboard pad and pole padding.

U1

U2

U3

U4

U4

U4

U6

U5

R1

R2

R3

1

1

1

K

6

8

8

9

9

8

1

8

6

2

15

1

15

9

8

8

9

3

8

8

9

3

8

3

8

1

8

9

8

9

7

8

5

4

8

9

8

7

9

PARTS LIST

14

12

13

GC55-LG

IT EM QTY DES CRIPTION

A 1 Post R1 4 Hex bolt M10x55 mm

BR28WasherM10

C 1 Actuator R3 4 Flange nut M10

D 1 Actuator plastic sleeve

E 2 Mounting plate ITEM QTY DESCRIPTION

F 1 Main Extension A rm 1 14 Nylo n Wa sher M1 2

G 2 Upper Extension Arm 2 1 Stud M12x235

H 1 Ba ckboar d 3 3 He x bo lt M 12x205

I 1 Flex ri m 4 1 He x Bo lt M12 x10 5mm

J 1 Rim Height Sticker 5 1 Steel Sleeve

K 1 Rim Pad (Pre-attached) 6 2 Hex bolt M12x55

L 1 Crank 7 4 Hex Bolt M12x30mm

M 1 Po le p adding 8 24 Flat washer M 12

9 12 Nylon nut M12

U1 1 Anchor Template 10 2 Self-tapping screw

U2 4 16mm Anc hor J-b olts 11 1 S c re w dri v e sock et

U3 8 Thick wa sh er fo r J -bolt 12 2 E nd plu g 25x50m m

U4 12 Hex n ut M16 13 4 E nd plu g 30x60m m

U5 4 Anchor Rebar 36"L 14 1 End plug 5"x5"

U6 4 Lock Washer M16 15 4 End plug 1/2"dia

RIM HA RDW ARE

HARDW ARE LIST

UNDERGROUND PARTS