Iron-A-Way UD42WDU, UD42ROU, UD42MDU, UD42RMU, UD42NDU Installation Manual

Installation

Manual

MODEL: UD-42

GET TO KNOW YOUR UNIT

2

1

5

3

4

(BOTTOM OF RACEWAY)

Tools Needed:

- Stud Finder

- 12-14” Level

- Tape Measure

- Small Flathead
Screwdriver

- Electric Drill
(with 1/4” & 1/8” drill bit)

1. CROSS BRACES

2. ELECTRICAL RACEWAY

3. SIDE BRACKETS

- 1/4” Nut Driver
(optional)

- Safety Glasses

- Utility Knife

4. ELECTRICAL OUTLET

5. HOT IRON REST

Supplied Parts:

Recessed Mounting:

- Two #10 x 1 1/2” wood screws for top

portion of cabinet

- Two #14 x 2 1/2” Phillips screws for top
side brackets

Surface Mounting:

- Two #14 x 4” wood screws

PRE-INSTALLATION

1. DETERMINE MOUNTING HEIGHT

Using the charts provided, determine
the mounting height above oor (the
distance between the oor and the
bottom of the cabinet). First choose
your desired ironing board height
from the left column, then locate the
corresponding mounting height in the
right column.

Desired Ironing

Board Height

32”

31”

30”

29”

Mounting

Height Above

Floor

16”

15”

14”

13”

2. LOCATE STUDS & UTILITIES

Using a stud nder, locate the wall

studs to be used for mounting.

Locate the existing wiring or other
utilities in the wall to prevent drilling
into/severing a wire and/or other utility
during installation.

Mounting

Height

Above Floor

Desired Ironing

Board Height