Iron-A-Way NE42NDU, NE42WDU, NE42FWU, NE42MDU, NE42RMU Specifications

Product Model: NE-42

Ironing Board Heigh t

Dimensions (Actual Size)

Overall height: 52”
Overall width: 15”
Overall depth including door: 7 3/4”
Dimension from wall to outer
edge of door (when recessed): 3 7/8”
Penetration into opening: 3 7/8”
Rough opening height: 51 1/4”
Rough opening width: 1 4 3/8”
Wall opening depth: 3 7/8”

Opening dimensions listed above

Overlap distances when using wall

Top overlap: 3/8”
Bottom overlap: 3/8”
Right side overlap: 3/8”
Left side overlap: 3/8”

Additional Information

• Unit may be surface mounted (unit extends
approximately 7 3/4” into room) or recessed
(unit extends approximately 3 7/8” into room)
into any wall with standard 16” center studs.

• See table bottom right to determine desired
ironing board height above the floor.

• Unit can be provided with a left hinged door
upon request. Right hinge is standard.

• Comes standard with w o o d veneer door.

• Recommended to attac h 2” x 4” cleats to

studs, level with the bottom of opening (for
support when recessing unit.)

• Door opens approximately 180°. Allow at
least 16” to the side of the unit for door to
swing open (door hinges on full length piano
hinge.)

• Options include: Surface mount trim
(necessary for surface mountin g ) , oak, maple,
pine, or white rais ed panel door, flat white
door, glass mirrored door, or no door, sleeve
board, swivel, rough-in kit, and iron.

See Page 2 for additional information

Specification s | February 2015

Cut Opening Board
Above floor Height

30” 37”
29” 36”
28” 35”
27” 34”
26” 33”
25” 32”
24” 31”

23” 30”

Recommen ded Adequate Space/Clearance for Ironing

Specification s | February 2015

Page 2

Product Model: NE-42

Additional Information

Measurements when board is lowered

(Not to Scale)

Unit can be provided with a left hinged door upon request. Right hinge is standard.
Door opens approximately 180°. Allow at least 16” from side of cabinet.

Distance from Wall to tip of Ironing Board 42”
Swivel Clearance from cutout opening of cabinet N/A
Distance from Wall in Full Swivel Position N/A
Standing Area Clearance ** 24”

** The recommended dis tance from the side of the ironing board where
the user will typic a l ly stand to ensure adequate space for ironing.