Iron-A-Way IAW42FWULH Specs

Product Model Numbers

Ironing Board Height

Ironing Centers: IAW-42

Dimensions (Actual Size)

Overall height: 51”
Overall width: 14 1/2”
Overall depth including door: 3 3/4”
Dimension from wall to outer
Edge of frame (when recessed): Flush
Penetration into opening: 2 1/4", 3”, 3 3/4" **
Rough opening height: 51”
Rough opening width: 14 1/2”
Wall opening depth: 3 7/8”

Additional Information

• Unit may be surface mounted (extends into

the room 3 3/4”) or can be recessed (door
only extends into room for a flush mount) into
any wall with standard 16” center studs.

• See table bottom right to determine desired

ironing board height above the floor.

• Unit can be provided with a left piano hinge

door upon request. Right hinge is standard.
For flush mount special hinges are required.

• Comes standard with wood veneer door.

• Recessed mounting - Recommended to

attach 2” x 4” cleat to studs, level with the
bottom of opening (for support.)

• Door opens approximately 180°. Allow at

least 16” to the side of the unit for door to
swing open.

• Options include: flat white door, no door,

sleeveboard, special hinges (recess
applications), and iron.

See Page 2 for additional information

Specifications

February 2015

Surface Mount

or

Recessed

Cut Opening Board
Above floor Height

28” 35”

27” 34”
26” 33”
25” 32”
24” 31”
23” 30”
22” 29”

Recomm end ed Adequate Space/Clearance for Ironing

Specifications

December 2014

Page 2
Product Model IAW-42
Additional Information

Measurements when board is lowered

(Not to Scale)

Unit can be provided with a left hinged door upon request. Right hinge is standard.
Door opens approximately 180°. Allow at least 16” from side of cabinet. Special hinges
required for recessed mounting.

Surface Mount Recessed Mount

Distance from Wall to tip of Ironing Board (Surface Mount) 43 1/4”
(Recessed Mount) 40 1/4”
Swivel Clearance from cutout opening of cabinet N/A
Distance from Wall in Full Swivel Position N/A
Standing Area Clearance ** 24”

** The recommended distance from the si de of the ironing board where
the user will typically stand to ensure adequate space for ironin g.