Iron-A-Way ANE42MDU, ANE42WDU, ANE42NDU, ANE42RMU, ANE42RWU Installation Manual

Installation

Manual

MODEL ANE-42

GET TO KNOW YOUR UNIT

1

Tools Needed:

- Stud Finder

- 12-14” Level

- Tape Measure

- Small Flathead
Screwdriver

2

1. CROSS BRACES 2. SIDE BRACKETS

- 1/4” Nut Driver
(optional)

- Safety Glasses

- Utility Knife

Recessed Mounting:

- Two #10 x 1 1/2” wood screws for top

portion of cabinet

- Two #14 x 2 1/2” Phillips screws for top
side brackets

Supplied Parts:

- Electric Drill
(with 1/4” & 1/8” drill bit)

Surface Mounting:

- Two #14 x 4” wood screws

PRE-INSTALLATION

1. DETERMINE MOUNTING HEIGHT

Using the charts provided, determine
the mounting height above oor (the
distance between the oor and the
bottom of the cabinet). First choose
your desired ironing board height
from the left column, then locate the
corresponding mounting height in the
right column.

Desired Ironing

Board Height

36”

35”

34”

33”

Mounting

Height Above

Floor

29”

28”

27”

26”

2. LOCATE STUDS & UTILITIES

Using a stud nder, locate the wall

studs to be used for mounting.

Locate the existing wiring or other
utilities in the wall to prevent drilling
into/severing a wire and/or other utility
during installation.

Mounting

Height

Above Floor

Desired Ironing

Board Height