IRiver iFP-700 Instruction Manual

iFP-700 Series

www.iRiver.com

Hardware Instruction Manual

Thank you for your purchase.

Please read this manual carefully

before using your new player.

www.iRiver.com

Digital Audio player/

Recorder/FM Tuner

Model iFP-700 Series

GETTING STARTED

LOCATING THE CONTROLS

PC SOFTWARE INSTALLATION

BASIC OPERATION

CONVENIENT FUNCTIONS

ADDITIONAL INFORMATION

1

2

3

4

5

6

Contents

THIS MANUAL COVERS THE INSTALLATION AND USE OF THE PLAYER HARDWARE. FOR DETAILS REGARDING THE SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC TO THE PLAYER, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL.

NOTE

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED, INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Note : This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR

TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

FCC Certification

GETTING STARTED

CONTENTS

1

INTERNET

FEATURES

ABOUT POWER SUPPLY

1-1

1-2

1-3

Getting started...

THIS MANUAL COVERS THE INSTALLATION AND USE OF THE PLAYER HARDWARE. FOR DETAILS REGARDING THE SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC TO THE PLAYER, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL.

NOTE

Getting started...

1-2

Getting started...

1-1

URL : www.iRiver.com Find information on our company, products, and customer and technical

support.

Update your player with firmware downloads. Firmware upgrades offer

support for new CODECS and deliver new product features.

Consult the product FAQ. Register your iRiver product online so that our Customer Service is able to

provide support as efficiently as possible. All contents contained in this manual subject to change without notice to

improve ability of this player or according to changing of specification.

iRiver Limited does not assume any responsibility for errors or omissions in this document or make any commitment to update the information contained herein. iRiver is a registered trademark of iRiver Limited in the Republic of Korea and /or other countries and is used under license. Microsoft Windows Media and the Windows Logo are trademarks or registered trademarks of Microsoft Corporation in the United States and /or other countries. All other brand and product names are trademarks of their respective companies or organization. All other product names may be trademarks of the companies with which they are associated.

INTERNET

Multi-Codec Player

Supports MP3, WMA, OGG and ASF formats.

Firmware Upgrade

Provides the latest updated features via firmware upgrade.

Graphic LCD supporting Multiple Languages

iFP-700 Series comes with graphic LCD which can support multiple languages (40 languages).

FM Function

You can easily listen to FM stations and set your favorite stations by using Auto Preset and Frequency Memory functions.

6 Preset EQ : Normal, Rock, Jazz, Classic, U Bass, Metal Xtreme EQ and Xtreme 3D

Customize your own EQ with Xtreme EQ and enhance bass and surround sound with Xtreme 3D.

GUI (Graphic User Interface) Menu System Simple Navigation

Simple navigation makes it easy to find any song.

Supports 8 levels of subfolders, 500 folders total and up to 1500 files at one time. Create your own playlists. Direct Encoding

11.025KHz ~44.1KHz, 8Kbps ~ 320Kbps

Record FM Radio, Voice, or line-in from another device

Voice record level is automatically controlled by AGC function.

Convenient neck strap. Supports USB 2.0 (iFP-780 Supports USB 1.1 only)

FEATURES

Open the battery cover.

Close the battery cover.

Insert the battery. (AA

1.5V type x 1ea)

Be sure to match the + and ends of the battery with the diagram inside the battery compartment.

ABOUT POWER SUPPLY

Inserting a battery

Getting started...

1-3

If the battery is worn out, “Low Battery” is displayed on the LCD. Insert a fresh battery.

To avoid corrosion, remove the battery if the player is not to be used for a long time. Remove dead battery immediately to avoid damage from corrosion. When corrosion occurs, wipe the battery compartment immediately with a dry cloth and insert a new battery.

NOTE

Locating the Controls

Contents

2

Front View

Side View

LCD Screen

2-1

2-2

2-3

THIS MANUAL COVERS THE INSTALLATION AND USE OF THE PLAYER HARDWARE. FOR DETAILS REGARDING THE SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC TO THE PLAYER, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL.

NOTE

Locating the Controls

2-2

Locating the Controls

2-1

Locating the Controls

Side View

Locating the Controls

Front View

MIC

LCD Screen

Volume +

Volume -

(Previous Track/Fast Reverse)

(Next Track/Fast Forward)

NAVI/MENU

STEREO

Power ON/OFF

/ (Play/Stop)

MEMORY/EQ

A-B (Interval repeat)

MODE/REC

USB Connection Port

HOLD

LINE IN

Battery

Earphones

ASF WMA OGG MP3

FILE FORMAT

2-3

SONG

NUMBER

BIT RATE

PLAY TIME

PLAYBACK MODE

BATTERY INDICATOR

VOLUME

EQUALIZER

VISUALIZATION

FOLDER NAME

SAMPLE RATE

PROGRAM

ARTIST/TITLE NAME

HOLD

Locating the Controls

LCD Screen

IRM (iRiver Rights Management)

iRiver Rights Management is a digital music format. Please visit our web site for details about this music format.

IRM

Locating the Controls

PC software installation

Attach the player

Detach the player

3-1

3-4

3-7

PC software installation

3

Contents

THIS MANUAL COVERS THE INSTALLATION AND USE OF THE PLAYER HARDWARE. FOR DETAILS REGARDING THE SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC TO THE PLAYER, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL.

NOTE

THIS SECTION COVERS THE INSTALLATION FOR WINDOWS OPERATING SYSTEMS ONLY. FOR INSTALLATION INSTRUCTIONS FOR MAC OS, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL.

NOTE

PC software installation

3-2

PC software installation

3-1

PC software installation

Software installation

System Requirements (Windows)

Pentium133MHzorfaster USB port Window 98SE / ME / 2000 / XP

CD-ROM drive 10MB free hard disk space

Note

The player can store MP3 files or files of any type. You can upload files, other than music (MP3, WMA, OGG, ASF), to the PC using the iRiver Music Manager Program. Download latest versions of drivers and iRiver Music Manager at www.iRiver.com

Insert the Installation CD into the CD-ROM drive. The following screen appears after inserting the CD.

If the installation doesn't automatically begin, execute the "setup.exe" file in the installation CD. The installation program will begin. The installation CD contains the following contents :

- Device Driver

- iRiver Music Manager

- Manager Program for Mac

Please be sure your login has Administrator privileges if using Windows 2000 or Windows XP.

Please complete the steps in this section BEFORE ATTACHING YOUR PLAYER TO YOUR PC.

IMPORTANT

PC software installation

Software installation

Click “Next” to Install iRiver Music Manager.

Select the folder to Install. Click “Next”.

3

4

Please note that the installation screens may differ slightly from those appearing here, as software may be of a more recent version. If your screens differ, please visit www.iRiver.com/software for an updated user guide.

Note

Insert the Installation CD into the CD-ROM drive. Installation starts automatically.

2

1

Click “Next” after selecting the language to install.

3-4

3-3

PC software installation

Software installation

Click “Install” to begin the installation.

5

6

7

Click “Next” after confirming the installation folder.

Installation is in progressing.

Click “Finish” after the installation is completed.

Attach the player

Connecting to the PC

Connect the USB cable (provided) to the USB port of your computer.

Type “A”

Type “B”

USBportonthePC

USB port on the player

USB cable

Type “A”

Type “B”

Turn on the player by pressing the button marked STEREO. Lift the protective cover over the USB port and connect the USB cable to the player.

“USB CONNECTED” will appear on the LCD screen of the player.

1

2

Connect the USB cable to the PC after playback stops to avoid errors. iFP-780 supports USB 1.1 (Full speed) and iFP-790/ 795/ 799 supports USB 2.0

(High speed) version.

Note

3

3-6

3-5

PC software installation

Attach the player

Installation of NewHardware

Select “Install the software automatically (Recommended)” and click “Next”.

If a "Hardware Installation" warning message appears, click "Continue Anyway". (Windows XP) The iRiver software driver will not cause any damage to your computer.

1

3

4

After installing iRiver Music Manager from the CD and connecting the player to your PC, "Found New Hardware" screen is displayed.

2

The computer will automatically search to find your new hardware.

Attach the player

Installation of NewHardware

Information screen is displayed on the PC. New hardware is installed successfully and ready to use.

5

7

The installation will continue.

Click “Finish” Completed the installation of “New hardware”.

6



Windows 98SE, Windows ME, Windows 2000 O.S do not need any other device driver installation.



Install New Hardware after installing iRiver Music Manager program.

Note

3-7

Basic Operation

Contents

4

Listening to Music

Basic Operation

Operating the FM Tuner

Recording

4-1

4-3

4-7

4-11

Basic Operation

PC software installation

Detach the player

Safely Removing the player from the PC

Click the “OK” after confirming the hardware to remove.

Click the “Close” after confirming the Safely Remove Hardware message. (In case of Windows XP)

1

3

4

Select the “Safely Remove hardware” after clicking the “Safe To Remove Hardware” by using the right button of mouse.

2

Click the “Stop” after selecting the device to remove.

If the player is disconnected inacculately, it may cause a malfunction or damages to the player.

To turn on the player

To play

To change modes

(MP3

FM

Voice recording LINE IN)

To stop

To advance

To reverse

To play the next folder

To play the previous folder

To fast forward

To fast reverse

To turn off the player

ListeningtoMusic

4-2

Click

4-1

ListeningtoMusic

Click

Long Click

Click

Push

Click

Push

Long Push

Long Click

Push Push

LISTENINGTO MUSIC

Put the HOLD switch to “OFF”.

Connect the earphones as shown below.

PressthePLAY/STOPbuttontoturnon the player. Press it again to play.

To select song

To select previous song To select next song

To adjust the volume

+:

To increase volume

-:

To decrease volume

- When "Hold" is ON, the buttons on the player will not function.

- When stopped or in recording standby mode, the player automatically turns off according to the setting of “STOP POWER OFF” on the MENU.(Refer to page 5-17)

OFF

NOTE

BasicOperation