Irit IR-2223 User Manual [ru]

IR-2223
ИНСТРУКЦИЯ
по эксплуатации
Manual Instruction
www.irit.com.ru
Производитель: Шанхай АМП Имп&Эксп Ко., Лтд. (Китай) Shanghai AMP Imp&Exp Co., Ltd Адрес: Room 603, Wisdom Cube, No. 18, Shunyi Road, Putuo District, Shanghai, China Импортер: ООО «РусИмпорт» (Россия), 121059, г. Москва, наб. Бережковская, д.4
Утюг электрический
Electrical iron
IR-2223
IR-2223
Description
1.Spraying mouth
2.Cover of water filling mouth
3.Burst steam button
4.Spraying button
3
5
2
10
4
5.Steam regulating knob 6 Soleplate
1
7.Self-clean
8.Water tank
9.Indicator bulb
10.Temperature regulating knob
11.Мaximum water level
7
11
6
12.Cord
Important safeguards
Please read the owner's manual before using the product. Before using, please check the voltage of the product if it is the same with the one in your home. When using steam ironing, you are recommended to use distilled water. During the iron is electrified, operator must not leave, must not let children touch the iron. When filling water or pouring out remaining water. Please pull out the plug first. After using, turn the temperature regulating knob to “0”, pull out the plug, put the iron on the smooth and stable place vertically. If the supply cord is damaged, it must be replaced by service center or qualified persons in order to avoid a hazard. The iron is not to be used if there are visible signs of damage. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance.
How to fill water
pull up the cap of water filling mouth fill until full push the cap back to its original position.
How to dry ironing:
Turn the temperature regulating knob to “0” position, turn the steam knob to “0” position, put the plug into the socket.
2
IR-2223
Turn the temperature regulating knob to the temperature scale which the ironed clothes required, the indicator will light on, then put the iron on the smooth and stable place vertically. After the indicator turn off, you can begin to iron.
12
9
8
How to iron with steam:
Fill water in the water tank. Use steam ironing, turn the steam knob to the “1, 2, 3” position, the method for regulating temperature is the same with dry ironing. After indicator turn off, turn the steam knob to the “1, 2, 3” position, steam will spray, you can start to iron. After ironing complete, turn the temperature regulating knob to the “0” position, pull out the plug, take off the water tank, pour out the remaining water, turn the steam knob to the “0” position
How to spray:
Press the spraying button repeatedly, water will spray out from the spraying mouth, at the time, you should keep enough water in the water tank.
Burst steaming
Set the temperature regulator to the MAX. Press the Burst steam button at intervals of 5 seconds Warning: enhanced steam emission may only be used with steam ironing (steam knob should be set to a position other than "0") This function can be used in an upright position of iron for vertical steaming
Self-Cleaning Function:
When after use around one month, you could heat the soleplate above 100 , then put the steam button to Self-Cleaning place The strong steam with some water will come out from soleplate, It will help clean the soleplate and prolong soleplate life
Care and cleaning
For cleaning, use a soft cloth. Never use sandpaper, vinegar or other chemical solutions. To clean plastic surfaces using ordinary soap and water solution
Storage
Pull the plug out of the socket. Remove water from the water tank Place the iron in a vertical position and allow it to cool completely
The importer retains his right to make changes in appearance and completeness of the item without preliminary notification to the customer. For household usage only.
TECHNICAL CHARACTERISTICS:
Voltage 220-240 V/ 50 Hz Power 2000W
Working life 2 years
3
Loading...
+ 1 hidden pages