Roll-In Blast Chiller / Shock Freezer
MF 180.2-MYA
… YOUR TRUSTED KITCHEN ASSISTANT
Item No.__________
Qty. _____________
Project __________
________________
________________
________________
________________
Model MF 180.2
MF 130.2-MYA
… YOUR TRUSTED KITCHEN ASSISTANT
Item No.__________
Qty. _____________
Project __________
________________
________________
________________
________________
Model MF 130.2
Sizing & Unit Production Guide MF 130.2
Pan Spacing: 2-3/4”
Blast Chilling Capacity (194F to 37F)*: 300 lbs.
Shock Freezing Capacity (194F to 0F)*: 300 lbs.
* Per production cycle (depending on product density):
Blast chilling … up to 90-minute cycle
Shock freezing … up to 240-minute cycle
Capacity: (18”x26”) full size sheet pans 12
MF 180.2-MYA
MultiFresh Model MF 180.2-MYA
The IRINOX Model MF 180.2 Blast Chiller / Shock Freezer shall
The IRINOX Model MF 180.2 Blast Chiller / Shock Freezer shall
have the following characteristics: Capacity – (1) single universal-
have the following characteristics: Capacity – (1) single universal-
-angle roll-in rack or (1) standard combi-oven trolley or (1) standard
angle roll-in rack; up to (24) 12”x20”x2-1/2” steam table pans or up
bakery rack: up to (24) 12”x20”x1/2” steam table pans or (12) 18”x
to (12) 18”x26” full size sheet pans; (1) standard combi-oven trolley;
x26” full size sheet pans; controller – shall feature the following
controller – shall feature the following control paths: standard mode
control paths: standard mode for chilling or freezing, dynamic mode
for chilling or freezing, dynamic mode for chilling or freezing (icon
for chilling or freezing (icon driven) and personalized modes for
driven) and personalized modes for customer specic products;
customer specific products; core probe – multi-sensor product
core probe – multi-sensor product core temperature probe with ve
core temperature probe with five (5) measuring points and “easy-
(5) measuring points and “easy-out” feature; plus all the standard
-out” feature; plus all the standard features listed below.
features listed below.
Standard Construction Features:
•
All type 304 stainless steel construction
Standard Construction Features:
• CFC-free high-density polyurethane insulation
• All type 304 stainless steel construction
• Full width door with low-temperature resistant magnetic gasket
●
All type 304 stainless steel construction
• CFC-free high-density polyurethane insulation
• Die-stamped interior door liner to magnetically store core
●
CFC-free high-density polyurethane insulation
• Full width door with low-temperature resistant magnetic gasket
probe
●
Full width door with low-temperature resistant magnetic gasket
• Die-stamped interior to magnetically store core probe
●
• Ergonomic edge-free stainless steel door handle
Die-stamped interior door liner to magnetically store core probe
●
• Ergonomic edge-free stainless steel door handle
Ergonomic edge-free stainless steel door handle
• Approved R404A refrigerant used in sealed system
●
Integrated single compressor and condenser
• Approved R404 refrigerant used in sealed system
• High efficiency evaporators with multiple injection points
●
Approved R404 refrigerant used in sealed system
• High performance evaporators with multiple injection points
• Luminous display with intuitive work-path controls
●
High efficiency evaporators with multiple injection points
• Luminous display with intuitive work-path controls
• Door hinged right (standard)
●
Luminous display with intuitive work-path controls
• USB port for data transfer to HACCP software, internal
●
• End-of-cycle hold mode
USB port for data transfer to HACCP software, internal
software upgrades and individual program uploads
software upgrades and individual program uploads
• Energy-efficient, air-cooled, remote condensing unit
●
• Door hinged right (standard)
Door hinged right (standard)
• 2-1/4” thick insulated floor
●
End-of-cycle hold mode
• End-of-cycle hold mode
●
Energy-efficient, air-cooled, remote condenser
• Energy-efficient, air-cooled, remote condensing unit
• 2-1/4” thick insulated floor
Unique Design and Performance Features:
Unique Design and Performance Features:
• 4 Standard cycles, 112 product specific cycles, ability to record
up to 38 replicable cycles
●
4 cycles in standard mode, 39 product specific cycles in
• Electronically controlled fans with low power consumption;
dynamic mode; ability to record up to 20 replicable cycles
fans stop automatically when door is open
into customized recipe book
●
30-40% more energy efficient, with faster chilling times - all
• Indirect air distribution and special airflow pattern to ensure
while preserving the freshness and fragrance of the food
perfect temperature uniformity
●
Electronically controlled fans with low power consumption;
• Easy access to clean evaporators and waterproof fans
fans stop automatically when door is open
●
• Easy to use touch screen with 7” interface
Indirect air distribution and special airflow pattern to ensure
perfect temperature uniformity
• WIFI for data transfer to HACCP software
●
Moisture preservation system by “delta-t” control
• Core probe magnetically secured to door when not in use
●
Smudge-resistant controller touch pad
●
Easy access to washable evaporators and waterproof fans
• Shock freezing temperature uses -40F air
… YOUR TRUSTED KITCHEN ASSISTANT
Item No.__________
Qty. _____________
Project __________
________________
________________
________________
________________
Model MF 180.2
Sizing & Unit Production Guide MF 180.2
Capacity (1) Roll-in Rack for up to (24) 12”x20”x2-1/2”
Sizing & Unit Production Guide MF 180.2
Combi-Oven Trolley, Standard 1
Capacity: (12”x20”x2-1/2”) steam table pans 24
Blast Chilling Capacity (194F to 37F)*: 400 lbs
Capacity: (18”x26”) full size sheet pans 12
Shock Freezing Capacity (194F to 0F)*: 400 lbs.
Pan Spacing: 2-3/4”
* Per production cycle (depending on product
Blast Chilling Capacity (194F to 37F)*: 400 lbs.
Shock Freezing Capacity (194F to 0F)*: 400 lbs.
* Per production cycle (depending on product density):
Options and Accessories (Please check):
Blast chilling … up to 90-minute cycle
• Sous-vide pouch core temperature probe
Shock freezing … up to 240-minute cycle
• Additional (2) food probes
• Liquid probe holder
• PRISON PACKAGE: security fasteners, lockable
closure for controller, flexible probe and stainless
Options and Accessories (Please check):
steel top
Sous-vide pouch core temperature probe
• Door hinged left
Flexible core temperature probe (prison package)
• SANIGEN sanitation system
Door hinged left
• Water-cooled, remote condensing unit
Rolling rack: (12) 18”x26x1” sheet pans or (24)
• External ramp required if unit not recessed into
12”x20”x2-1/2” steam table pans
floor pit
SANIGEN sanitation system
• 2 Year extended compressor warranty
Water-cooled, remote condenser
• Pass-thru cabinet
Portable HACCP data printer
• Spare parts kit
HACCP software
• KDF shipping – assembly by others
• Condensing unit cover for outdoor use
steam table pans or up to (12) 18”x26” full
size sheet pans or (1) standard bakery rack
density): Blast chilling … up to 90-minute cycle
Shock freezing … up to 240-minute cycle
Product Warranty Protection:
- 1 year, parts and labor
Rev. 11/14
IRINOX USA
Phone: 508-230-5818 Fax: 508-230-5819 www.irinoxusa.com email: info@irinoxusa.com
MF 180.2-MYA
3712 ''
4''5516 ''
2
1
4 ''
91
4 ''
84
3
4 ''
MF 250.2-MYA
...YOUR TRUSTED KITCHEN ASSISTANT
Remote Condenser Standard
Refrigerant Type R404A
Discharge Connection 3/4”
Condenser: Unit Crated
For Chiller 625 A 625 A
Width 48-3/4” 60-1/4”
Depth 40-5/8” 44-1/4”
Height 68-5/8” 78-3/4”
Weight 882 lbs 970 lbs
Condenser Unit Electric Data / Requirements
Model 625 A
Voltage / Phase / Hz 208/3/60
Total KW 20.5
Total HP 26.4
Amps 67.0
Displacement 2,067 cu.ft /hour
Continued product development may necessitate specification changes without notice. Rev. 12/10
...YOUR TRUSTED KITCHEN ASSISTANT
5-5/16” 4” 5”
3
4 ''
91
91-3/4”
5-5/16”
3
2-3/4”
4''5516 ''
4 ''
84
84-3/4”
1
4 ''
2
2-1/4”
3712 ''
4” 5”
7-7/8”
7”
D.P. = Door Passage
D.P. 79-5/16”
2-3/4”
ø1-5/16”
7”
20-5/8”
2-3/4”
2-3/4”
7-7/8”
Drain Position
Cabinet Dimensions and Weight Sunken Floor
*See #1 below
Width 63”
Depth 56”
Height 91-3/4”
Weight (unit) 1058 lbs.
Cabinet Electric Data / Power Requirements
208V 60 Hz 3 Phase, 3KW, 9.6 Amp
[D] Drain Connection: 1-1/2” ID [Per local codes]
Installation Notes:
*1. 2-1/2” pit required as oor of cabinet insulated; ller by others may be required.
2. If pit not available an external ramp is required.
3. Cabinet shipped on evaporator coil side.
4. If pass-thru ordered two ramps required.
5. Installation and charging of refrigeration lines are the responsibility of owner or
installation contractor.
6. 5 wires # 14AWG must be installed by owner or installation contractor between
the chiller and the condensing unit. The connection should be performed
according to the electrical diagram.
7. If installed outdoors, condensing unit should be protected from direct sunlight and
provided with a minimum of 40” air space.
8. If installed over 75’ from chiller, installer must contact IRINOX USA for proper
refrigerant pipe sizing and verify if necessary to install oil separator
Continued product development may necessitate specication changes without notice.
56”
66-1/2”
D.P. = Door Passage
49-1/4”
63”
20T.
600x800
20T.
gN2/1
(D.P.) 32-1/4”
15-3/4”
39-3/4”
91”
Rev. 11/14
IRINOX USA
Phone: 508-230-5818 Fax: 508-230-5819 www.irinoxusa.com email: info@irinoxusa.com