(I) Overview of headset
Wireless Stereo Headphones
USER MANUAL
1
2
3
4
5
1
.ON/OFF
2
.
Next/Volume
+
3
.Pause/Play/Answer/Hang up the call
4
.Back/Volume- 5
.FM/MP3/auto search radio
6
.Microphone built-in
7
.Charging slot (USB) 8
.Audio slot 9
.Indicator lamp
Made in China
10.TF slot
1
6
7
8
9
10
(II)Operation instructions for wireless mode
ON/OFF
1.On:Long press ON/OFF for about 3s to switch on, wireless state by
default, red blue light shines; then it begins wireless pairing mode.
2. Off: Long press ON/OFF for about 3s.If voltage is low, the red
light twinkles fast and then the headset is off.
Play/Pause
When MP3 or wireless stereo headset is on, short press Pause button
when the music is on, the music will be paused.
Short press it again to p lay the music on the phon e .
Next/Volume Up
When MP3 or wireless stereo headset is on, short press NEXT to
play the next song automatically; long press NEXT to turn it up.
Back/Lower Volume-
When MP3 or wireless stereo phone is on, short press BACK to hear
the last song that was played.
Long press BACK to lower the volume
Answer the Call / Hang Up / Dial
1. When there is a call, press the call button to answer the call.
2. After the call, press the call button to hang up, if the other side
hangs up, there is no need to press the call button.
3. In the wireless Mode, press two times the call button, to dial the
last number which has been recorded automatically.
When making an outbound phone call, or answer an incoming call, if the
wireless headset is playing music, the music will pause automatically
and enter the Waiting mode, the music play automatically after hang up.
2
(III)Operating Instructions on MP3 Mode
1. In power-on mode, insert the TF card,MP3 will play automatically,
the mode indicator shows the blue light flash slow.
2. If in wireless mode, need to press two times M button to
convert to MP3 mode.
(IV)Operation instruction for FM radio
1. Short press M conversion key to switch to radio, when it is on.
2. Please perform auto search before hearing the radio
(V)Operation instruction for LINE IN
Insert the audio line to the interface of headset and then you can
hear songs with it as normal headset wireless state stop use (power
off position)
(IV) Instructions for charging
1. Before use the headset for the first time, please charge it full.
2. First of all, insert the charger interface to the charging interface
on the wireless headset.
3. Connect to the charger and the red light shines; when it is fully
charged, the red light turn off.
3
Loading...