IQRF GW-USB-13A User Manual

GW-USB-13A

IQRF USB Gateway with OLED

User's Guide

© 2014 MICRORISC s.r.o. www.iqrf.org User_Guide_GW-USB-13A_140331 Page 1

GW-USB-13A

© 2014 MICRORISC s.r.o. www.iqrf.org User_Guide_GW-USB-13A_140331 Page 2

Description

GW-USB-13A is an IQRF gateway with USB connectivity
and OLED display.

It is a part of the IQRF platform intended as an interface
between USB and an IQRF network or a portable interface
between a human and an IQRF network.

It allows to visualise and setup parameters in given
application. GW-USB-13A is a generic equipment, i.e. the
hardware is fixed and the user can implement specific
functionality by software only.

Applications should be developed using the DS-PAGER
development set.

Applications

• Home automation

• Portable controllers and pagers

• Diagnostic tool

• Portable service tool for IQRF network management

Key features

• OLED display 1“, 128 x 64 pixels, white

• 8b microcontroller

• USB v2.0 interface

• EEPROM memory

• 3 pushbuttons

• Piezo buzzer

• IQRF transceiver module

• On-board PCB antenna

• Backup accumulator

• Very low power consumption in Sleep mode

Block schematics