IQ Power Tools iQ426HEPA Operator's Manual
®
iQ426HEPA
Operator’s Manual
Use QR Code to download the iQ426HEPA Operator’s Manual in your language.
Please read the operator’s manual carefully and make sure you understand the
instructions before using the machine.
For light industrial and indoor use only.
Cyclonic Dust Extractor
With HEPA Filtration
M-iQ4 26HEPA-001- 0M112019
TABLE OF CONTENTS
Topic Section
Safety
Machine Labels
Introduction
What Is What?
Assembly
Operation
Filter Maintenance
Dust Disposal
Cart
Transport and Storage
Troubleshooting
Technical Data
Warranty Policy
1
2
3
4
5
6
7
8
9
10
11
12
13
English
888-274-7744
www.iqpowertools.com
iQ426HEPA
Operator’s Manual
IMPORTANT SAFETY INSTRUCTIONS
Important Safety Rules
When using an electrical appliance, basic precautions
should always be followed, including the following:
READ ALL INSTRUCTIONS
BEFORE USING THIS APPLIANCE
WARNING - To reduce the risk of fire, electric shock
or injury:
a) Do not leave appliance when plugged in. Unplug
English
from outlet when not in use and before servicing.
b) Do not use on wet surfaces. Do not expose to rain.
Store indoors.
c) Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
d) Use only as described in this manual. Use only
manufacturer’s attachments.
e) Do not use with damaged cord or plug. If appliance
is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, return
it to a service center.
m) Do not use to pick up flammable or combustible
liquids, such as gasoline, or in area where they may
be present.
n )For grounded appliance: Connect to a properly
grounded outlet only. See grounding instructions.
o) For a vacuum cleaner:
1) Do not pick up anything that is burning or smoking,
such as cigarettes, matches, or hot ashes.
2.) Do not use without dust bag and/or filters in place.
3) Warning - To reduce the risk of personal injury due
to a loose electrical connection between the
appliance’s plug and extension cord, firmly and
fully attach the appliance plug to the extension
cord. Periodically check the connection while
operating to ensure it is fully attached. Do not use
an extension cord that provides a loose connection.
A loose connection may result in overheating, fire,
and increases the risk of burning.
4) To reduce the risk of disconnection of the appliance
cord from the extension cord during operating:
f) Do not pull or carry by cord, use cord as a handle,
close a door on cord, or pull cord around sharp edges
or corners. Do not run appliance over cord. Keep cord
away from heated surfaces.
g) Do not unplug by pulling on cord. To unplug, grasp
the plug, not the cord.
h) Do not handle plug or appliance with wet hands.
i) Do not put any object into openings. Do not use
with any opening blocked; keep free of dust, lint, hair,
loose clothing, fingers, and anything that may reduce
airflow.
j) Keep hair, loose clothing, fingers and all parts of
your body away from openings and moving parts.
k) Turn o all controls before unplugging.
l) Use extra care when cleaning on stairs.
i) Make a knot like below or,
ii) Use one of the plug-receptacle retaining
straps or connectors described in this manual.
iii) Secure the extension cord to the appliance
plug as shown or described in the Operating
Instructions.”
5) Maintain Appliance With Care - Inspect extension
cord periodically and replace if damaged.”
6) Intended use for dry application only. The machine
is designed to vacuum dry, non-combustible dust.
Do not use for other tasks.
SAVE THESE INSTRUCTIONS
1.1
iQ426HEPA
Operator’s Manual
888-274-7744
www.iqpowertools.com
SAFETY
General
Do not use the machine unless you are able to call
for help in the event of an accident. Always have a
first aid kit nearby.
EXTENSION CORDS AND CABLES
The marking on the extension cable must be the
same or higher than the value stated on the machine’s
rating plate.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the
risk of electric shock.
• Keep the connection to the extension cord dry
and o the ground.
• Keep cable away from heat, oil, sharp edges or
moving parts. Damaged or entangled cables
increase the risk of electric shock.
• Check that the cord and extension cord are
intact and in good condition. Never use the
machine if any cable or plug is damaged. Take it
into an authorized service workshop for repair.
• To avoid overheating, do not use the extension
cord while it is rolled up.
• When using an extension cable, use only
certified extension cables with sucient reach.
To reduce the risk of electric shock, use only with
an extension cord intended for outdoor use, such
as SJW or SJTW.
POWER TOOLS AND CUTTING
WARNING!
MACHINES HAVE THE
POTENTIAL TO CREATE SPARKS. ALWAYS KEEP FIRE
EXTINGUISHERS HANDY.
SAWING, DRILLING AND
WARNING!
GRINDING GENERATES
DUST THAT COMES FROM THE MATERIAL
BEING CUT, WHICH FREQUENTLY CONTAINS
SILICA. SILICA IS A BASIC COMPONENT OF
SAND, QUARTZ, BRICK CLAY, GRANITE AND
NUMEROUS OTHER MINERALS AND ROCKS.
ALWAYS EMPLOY ENGINEERED DUST
CONTROLS AND PERSONAL PROTECTION
EQUIPMENT SUITABLE TO THE MATERIAL
BEING SAWED, DRILLED OR GROUND; SEE
OSHA (29 CFR PART 1910.1200).
NEVER EXPOSE YOURSELF OR BYSTANDARDS
TO HAZARDOUS DUST THAT EXCEEDS THE
PERMISSIBLE EXPOSURE LIMIT (PEL) AS
SET BY YOUR LOCAL JURISDICTION OR
GOVERNING AGENCY. E.G. OSHA, CSST.
THE USE OF PRODUCTS SUCH
WARNING!
AS CUTTERS, GRINDERS, DRILLS
THAT SAND OR FORM MATERIAL CAN GENERATE DUST AND
VAPORS WHICH MAY CONTAIN HAZARDOUS CHEMICALS.
CHECK THE NATURE OF THE MATERIAL YOU INTEND TO
PROCESS AND USE AN APPROPRIATE BREATHING MASK.
English
Make sure your extension cord is in good condition and
USE OF THIS PRODUCT CAN
is the correct size for your appliance. The following Table
shows the correct size to use depending on cord length
and nameplate ampere rating. If in doubt, use the heavier
gauge. The smaller gauge number, the heavier the cord.
Ampere rating Volts
More than , A Not more than, A 120 V mm
6 6 - 0.82 (18) 1.3 (16) 1.3 (16) 2.1 (14)
6 10 - 0.82 (18) 1.3 (16) 2 .1 (14) 3.3 (12)
10 12 - 0.82 (18) 1.3 (16) 2.1 (14) 3.3 (12)
888-274-7744
www.iqpowertools.com
7.62 m (25 ft) 15.24 m (50 ft) 30.48 m (100 ft) 45.72 m (150 ft)
WARNING!
CAUSE EXPOSURE TO
MATERIALS KNOWN TO THE STATE OF CALIFORNIA TO
CAUSE CANCER AND/OR BIRTH DEFECTS OR OTHER
REPRODUCTIVE HARM.
PROTECT YOURSELF AND
WARNING!
OTHERS FROM OVEREXPOSURE.
REFER TO YOUR LOCAL JURISDICTION OR GOVERNING
AGENCY. E.G. OSHA, CSST.
Total length of cord
2
(AWG)
iQ426HEPA
Operator’s Manual
1.2
SAFETY
GENERAL SAFETY PRECAUTIONS
This section describes basic safety directions for using
the machine. This information is never a substitute for
professional skills and experience.
• Please read the operator’s manual carefully
and make sure you understand the instructions
before using the machine. Save all warnings
and instructions for future reference.
• Keep in mind that the operator is responsible
for accidents or hazards occurring to other
people or their property.
• All operators shall be trained in the use
English
of the machine.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• People and animals can distract you causing
you to lose control of the machine. For this
reason, always remain concentrated and
focused on the task.
• Do not use the machine in bad weather such
as dense fog, heavy rain, strong wind, intense
cold, etc...
• Never start to work with the machine
before the working area is clear and you
have a stable work surface.
PERSONAL SAFETY
Never use the machine if you are fatigued, while under
the influence of alcohol or drugs, medication or anything
that could aect your vision, alertness, coordination
or judgement.
• Check that no tools or other objects have been
left lying on the machine.
• Never allow anyone else to use the machine
without proper training.
• Always shut o the machine during remove
work breaks.
• Never work alone, always ensure there is
another person close at hand.
• Learn how to use the machine and its controls
safely and learn to how to stop quickly.
Learn to recognize the safety decals.
• Keep handles dry, clean and free from
oil and grease.
• Do not overreach. Keep proper footing and
balance at all times.
• Never stand on the machine.
PERSONAL PROTECTIVE EQUIPMENT
You must use approved personal protective equipment
whenever you use the machine. Personal protective
equipment cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident does happen.
Listen out for warning signals or shouts when you
are wearing hearing protection. Always remove your
hearing protection as soon as the motor stops.
Always use approved eye protection
• If you use a face shield then you must also
wear approved protective goggles. Approved
protective goggles must comply with standard
ANSI Z87.1 in the USA or EN 166 in EU
countries.
Visors must comply with standard EN 1731.
Recommended Personal Protective Equipment:
• Hearing protection
• Breathing mask
• Protective gloves.
• Hair covering or devices to contain long hair
ALWAYS THINK ABOUT YOUR WORK ENVIRONMENT
AND USE COMMON SENSE.
It is not possible to cover every conceivable situation
you can face. Always exercise care and use your
common sense. If you get into a situation where you
feel unsafe, stop and seek expert advice. Contact your
dealer, service agent or an experienced user. Do not
attempt any task or operation that makes you feel
unsure whether or not it is safe.
MACHINE USE AND CARE
• The machine is designed for vacuuming and
separating dry, non-combustible dust with
an explosion limit value of >0.1mg/m3. Do not
use the product for other tasks.
• Do not pick up anything that is burning
or smoking, such as cigarettes, matches
or hot ashes.
• Do not use to pick up flammable or
combustible liquids, such as gasoline, or
use in areas where they are present.
• This machine is designed for picking up
dry, non-flammable dust and debris in an
indoor environment. It is not suitable for
picking up liquids.
• Do not pick up any type of liquids.
• Do not allow a build-up of dust, hair and
1.3
iQ426HEPA
Operator’s Manual
888-274-7744
www.iqpowertools.com
SAFETY
anything that may reduce airflow.
• Keep hair, loose clothing, fingers and all parts
of body away from openings and moving parts.
• Use extra care when cleaning on stairs.
• Do not use the product without filters in
place. Replace filters as described in this
manual. It is highly recommended to use dust
bags for collection, containment and proper
disposal of dust.
• Always perform daily maintenance before
starting the machine.
• Do not overload the machine. Overloading
can damage the machine.
• Keep all parts in good working order and
ensure that all fixtures are properly tightened.
Replace all worn or damaged decals.
• Never leave the machine unsupervised with
the motor running.
• Observe care when lifting. You are handling
heavy parts, which imply the risk of pinch
injuries or other injuries.
ELECTRICAL SAFETY
WARNING! There is always a risk of shocks from
electrically powered machines. Avoid unfavourable
weather conditions and bodily contact with lightning
conductors and metal objects. Always follow the
instructions in the Operator’s manual to avoid damage.
• Before using the dust extractor make
sure that the power & voltage corresponds
with the voltage shown on the machines rating
plate, including extension cords.
• Never connect the machine to an
outlet if plug or cord is damaged.
• Check that the main voltage corresponds
with that stated on the rating plate on
the machine.
• Inspection and/or maintenance should be
carried out with the motor switched o and
the plug disconnected.
• Always shut down the machine before
disconnecting the power plug.
• Never drag the machine by means of the cord
and never pull out the plug by pulling the cord.
Hold the plug to disconnect the power cord.
• Never use the machine if any cable or plug
is damaged, but hand it in to an authorized
service workshop for repair.
• Prevent unintentional starting of the motor.
Ensure the power switch is in the OFF position before connecting the machine to
a power source.
• Do not modify the plug. If it will not fit the
outlet, have a proper outlet installed by a
qualified electrician. Make sure local
regulations and ordinances are followed.
An under sized extension cord will cause a drop in line
voltage, resulting in loss of power and overheating.
Use only three-wire outdoor extension cords that have
three-prong grounding plugs and grounding receptacles
that accept the appliance’s plug.
THERE IS ALWAYS A RISK
WARNING!
OF CRUSH INJURIES WHEN
WORKING WITH PRODUCTS CONTAINING MOVING PARTS.
WEAR PROTECTIVE GLOVES TO AVOID BODY INJURIES.
LONG TERM EXPOSURE
CAUTION!
TO NOISE CAN RESULT IN
PERMANENT HEARING IMPAIRMENT. ALWAYS USE
APPROVED HEARING PROTECTION.
THE MACHINE CAN BE A
WARNING!
DANGEROUS TOOL IF USED
INCORRECTLY OR CARELESSLY, WHICH CAN CAUSE
SERIOUS OR FATAL INJURY TO THE OPERATOR OR OTHERS.
IMPROPER CONNECTION CAN
WARNING!
RESULT IN THE RISK OF ELECTRIC
SHOCK. CONTACT A QUALIFIED ELECTRICIAN IF IN DOUBT AS
TO WHETHER THE APPLIANCE IS PROPERLY GROUNDED.
UNAUTHORIZED MODIFICATIONS
WARNING!
AND/ OR ACCESSORIES MAY LEAD
TO SERIOUS INJURY OR DEATH TO THE USER OR OTHERS.
WHEN CLEANING THE MACHINE
WARNING!
MAKE SURE TO AVOID WATER
ENTERING THE ELECTRICAL SYSTEM AND THE MOTOR
UNIT. WATER CAN CAUSE DAMAGE TO THE MACHINE OR
SHORT CIRCUIT.
GOOD MOTOR PERFORMANCE
NOTICE!
DEPENDS ON PROPER VOLTAGE.
EXTENSION CABLES THAT ARE TOO LONG AND/OR HAVE
A GAUGE THAT IS TOO SMALL, REDUCE POWER TO THE
MOTOR UNDER LOAD, RESULTING IN REDUCED OUTPUT
OR MALFUNCTIONS.
English
888-274-7744
www.iqpowertools.com
iQ426HEPA
Operator’s Manual
1.4
KEY SYMBOLS & SAFETY RULES
Explanation of Warning Levels
The warnings are graded in three levels.
Used if there is a risk of serious injury or death for
the operator or damage to the surroundings if the
instructions in the manual are not followed.
English
Used if there is a risk of injury to the operator or
damage to the surroundings if the instructions in
the manual are not followed.
NOTICE
Used if there is a risk of damage to materials or the
machine if the instructions in the manual are not followed.
International Symbols
The following international symbols may be used if the
significance of these symbols is explained
Symbols on the machine
WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine
or performing any maintenance.
Always wear hearing protection.
Always wear protective goggles
and/or a visor.
High voltage. Risk of an electric shock.
Turn o machine and unplug before
transportation.
The following international symbols may be used if
the significance of the symbols is explained in the
instructions packaged with the product:
a) - ON power symbol
b) - OFF power symbol
c) - STANDBY symbol
d) - ON-OFF (push-push) symbol
e) - EARTH (GROUND) symbol
f) - PROTECTIVE EARTH (Protective Ground) symbol
g) - FRAME or CHASSIS symbol
h) - ALTERNATING CURRENT symbol
i) - DIRECT CURRENT symbol
j) - READ OPERATOR’S MANUAL symbol
2.1
CSA approved.
iQ426HEPA
Operator’s Manual
CU S
248014
888-274-7744
www.iqpowertools.com
INTRODUCTION
Dear Customer
We at IQ Power Tools want to congratulate you
on selecting the iQ426HEPA™ Cyclonic Dust Extractor
with HEPA Filtration. We are certain that you will be
pleased with your purchase. iQ Power Tools takes
pride in manufacturing the most innovative tools and
equipment in the industry.
If operated correctly, your iQ426HEPA™ should provide
you with years of quality service. This operator’s
manual contains information you need to operate and
maintain your iQ426HEPA™ safely and correctly. Please
take a few minutes to familiarize yourself with your new
iQ426HEPA™ by reading and reviewing this manual.
If you should have any questions concerning your
iQ426HEPA™ please feel free to contact us at
Phone: (888) 274-7744
Email: customer.service@iqpowertools.com
It is our wish that you will be satisfied with your product
and that it will prove to be a valued tool for a long time.
A purchase of one of our products gives you access
to professional help with repairs and services. If
the retailer who sells your machine is not one of our
authorized dealers, ask him for the address of your
nearest service workshop.
The Manufacturer’s Reservation
Subsequent to publishing this manual IQ Power Tools
may issue additional information for safe operation of
this product. It is the owner’s obligation to keep up with
the safest methods of operation.
iQ Power Tools has a policy of continuous product
development and therefore reserves the right to
modify the design and appearance of products
without prior notice.
For customer information and assistance,
contact us at our website: www.iQPowerTools.com
Design & Features
Values such as high performance, reliability, innovative
technology, and environmental considerations
distinguish iQ Power Tools’ products. Safe operation of
this product requires the operator to read this manual
carefully. Ask your dealer or iQ Power Tools should you
need more information.
English
This operator’s manual is a valuable document. Make
sure it is always at hand at the work place. By following
its content (using, service, maintenance etc..) the life
span and the second-hand value of the machine can
be extended. If you ever lend or sell this machine, make
sure that the borrower or buyer gets the operator’s
manual so they will also know how to properly maintain
and use it.
Owner Responsibility
It is the owner’s/employer’s responsibility to ensure
that the operator has sucient knowledge about how
to use the machine safely. Supervisors and operators
must have read and understood the Operator’s Manual.
They must be aware of:
• The machine’s safety instructions.
• The machine’s range of applications and limitations.
• How the machine is to be used and maintained.
Local regulations could restrict the use of this machine.
Find out what regulations are applicable where you
work before you start using the machine.
iQ426HEPA™
CYCLONIC HEPA DUST EXTRACTOR WITH FOUR
STAGE FILTRATION
This innovative patent pending machine is an industrial
vacuum designed for universal and commercial use.
The machine is designed to vacuum dry, noncombustible dust. Do not use for other tasks.
For dry applications only.
888-274-7744
www.iqpowertools.com
iQ426HEPA
Operator’s Manual
3.1
Loading...