IQ Power Tools iQ1014S Operator's Manual

iQ1014S

Operator’s Manual

Please read the operator’s manual carefully and make sure
you understand the instructions before using the machine.

0360-89001-02

TABLE OF CONTENTS

Topic Section

Introduction

Design And Features

iQ1014S

General Safety

Personal Protective Equipment

General Safety Precautions

Work Area Safety

Machine Use And Care

Electrical Requirements

Symbols On The Machine

Explanation Of Warning Levels

Safety Messages

Transport, Set up & Operation

Maintenance

Machine Power

Cleaning the Filter

Blades

Blade Installation

1

1.1

1.1

2.1

2.1

2.2

2.2

2.2

3

3.1

3.1

4

5

5.1

5.1

6

6.1

Carbon Brushes

Controller

Technical Data

Warranty Policy

7

8

9

10

888-274-7744
www.iqpowertools.com

iQ1014S

Operator’s Manual

INTRODUCTION

Dear Customer

We at IQ Power Tools™ want to congratulate you on
selecting the iQ1014S® Heavy Duty Dust Collector
with 14” iQ Masonry Saw. We are certain that you will
be pleased with your purchase. iQ Power Tools takes
pride in manufacturing the most innovative tools and
equipment in the industry.

If operated correctly, your iQ1014S® should provide you
with years of quality service. This operator’s manual
contains information you need to operate and maintain
your iQ1014S® safely and correctly. Please take a few
minutes to familiarize yourself with your new iQ1014S®
by reading and reviewing this manual.

If you should have any questions concerning your
iQ1014S® please feel free to contact us at
Phone: [phone]
Email: [e-mail]

It is our wish that you will be satisfied with your product
and that it will prove to be a valued tool for a long time.
A purchase of one of our products gives you access
to professional help with repairs and services. If
the retailer who sells your machine is not one of our
authorised dealers, ask him for the address of your
nearest service workshop.

The Manufacturer’s Reservation

Subsequent to publishing this manual, IQ Power Tools
may issue additional information for safe operation of
this product. It is the owner’s obligation to keep up with
the safest methods of operation.

iQ Power Tools has a policy of continuous product
development and therefore reserves the right to
modify the design and appearance of products
without prior notice.

For customer information and assistance,
contact us at our website: www.iQPowerTools.com

Design & Features

Values such as high performance, reliability, innovative
technology, and environmental considerations
distinguish iQ Power Tools’ products. Safe operation of
this product requires the operator to read this manual
carefully. Ask your dealer or iQ Power Tools should you
need more information.

This operator’s manual is a valuable document. Make
sure it is always available at the work place. By following
its content (using, service, maintenance etc.) the life
span and the second-hand value of the machine can
be extended. If you ever lend or sell this machine, make
sure that the borrower or buyer gets the operator’s
manual, so they will also know how to properly maintain
and use it.

Owner Responsibility

It is the owner’s/employer’s responsibility to ensure
that the operator has sucient knowledge about how
to use the machine safely. Supervisors and operators
must have read and understood the Operator’s Manual.
They must be aware of:

• The machine’s safety instructions.

• The machine’s range of applications and limitations.

• How the machine is to be used and maintained.

Local regulations could restrict the use of this machine.
Find out what regulations are applicable where you
work before you start using the machine.

iQ1014S

This innovative design combines the features of a
professional masonry saw with a powerful vacuum
system that cuts cleanly and eciently with no water
and no dust.

COMPACT AND MOBILE DESIGN

Fits through 36” doorways and can be placed directly
on scaolding. The iQ1014S is easy to transport with
heavy duty wheels and sturdy handle.

CUT CAPACITY

4.5” X 12”

iQ1014S

1.1

Operator’s Manual

888-274-7744

www.iqpowertools.com

GENERAL SAFETY

General

Do not use the machine unless you are able to call
for help in the event of an accident. Always have a
first aid kit nearby.

POWER TOOLS AND CUT TING

WARNING!

MACHINES HAVE THE
POTENTIAL TO CREATE SPARKS. ALWAYS KEEP FIRE
EXTINGUISHERS HANDY.

PERSONAL PROTECTIVE EQUIPMENT

You must use approved personal protective equipment
whenever you use the machine. Personal protective
equipment cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident does happen.
Ask your dealer for help in choosing the right equipment.

THE USE OF PRODUCTS SUCH

WARNING!

AS CUTTERS, GRINDERS,
DRILLS, THAT SAND OR FORM MATERIAL CAN GENERATE
DUST AND VAPORS WHICH MAY CONTAIN HAZARDOUS
CHEMICALS. CHECK THE NATURE OF THE MATERIAL
YOU INTEND TO PROCESS AND USE AN APPROPRIATE
BREATHING MASK.

Generally, clothes should be close-fitting without
restricting your freedom of movement. Be careful
as clothing, long hair, and jewelry can get caught
in moving parts.

GENERAL SAFETY PRECAUTIONS

This section describes basic safety directions for using
the machine. This information is never a substitute for
professional skills and experience.

• Please read the operator’s manual carefully
and make sure you understand the instructions
before using the machine. Save all warnings
and instructions for future reference.

• Keep in mind that the operator is responsible
for accidents or hazards occurring to other
people or their property.

• All operators shall be trained in the use
of the machine.

The owner is responsible for ensuring that the operators
receive training.

• The machine must be kept clean. Signs and
stickers must be fully legible.

LONG TERM EXPOSURE

CAUTION!

TO NOISE CAN RESULT IN
PERMANENT HEARING IMPAIRMENT. SO ALWAYS USE
APPROVED HEARING PROTECTION.

Listen out for warning signals or shouts when you are
wearing hearing protection. Always remove your hearing
protection as soon as the motor stops.

THERE IS ALWAYS A RISK

WARNING!

OF CRUSH INJURIES WHEN
WORKING WITH PRODUCTS CONTAINING MOVING PARTS.
WEAR PROTECTIVE GLOVES TO AVOID BODY INJURIES.

Always wear:

• Hearing protection

• Approved eye protection
If you use a face shield then you must
also wear approved protective goggles.
Approved protective goggles must comply
with standard ANSI Z87.1 in the USA or EN
166 in EU countries. Visors must comply
with standard EN 1731.

• Breathing mask

• Protective gloves

• Hair covering or devices to contain long hair
i.e.: Hair Ties For Guys

THE MACHINE CAN BE A

WARNING!

DANGEROUS TOOL IF USED
INCORRECTLY OR CARELESSLY, WHICH CAN CAUSE
SERIOUS OR FATAL INJURY TO THE OPERATOR OR OTHERS.

- Never allow children or other persons not trained in
the use of the machine to use or service it.

- Never allow anyone else to use the machine without
first ensuring that they have read and understood the
contents of the operator’s manual.

- Never use the machine if you are fatigued, while
under the influence of alcohol or drugs, medication
or anything that could aect your vision, alertness,
coordination or judgement.

UNAUTHORIZED MODIFICATIONS

WARNING!

AND/ OR ACCESSORIES MAY LEAD
TO SERIOUS INJURY OR DEATH TO THE USER OR OTHERS.

Do not modify this product or use it if it appears to have
been modified by others.
Never use a machine that is faulty. Carry out the
safety checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. See instructions under the heading
Maintenance. Always use genuine accessories. Contact
your dealer for more information.

888-274-7744
www.iqpowertools.com

iQ1014S

Operator’s Manual

2.1

GENERAL SAFETY

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

• People and animals can distract you causing

you to lose control of the machine. For this
reason, always remain concentrated and
focused on the task.

• Do not use the machine in bad weather, such

as dense fog, heavy rain, strong wind, intense
cold, etc.

• Never start to work with the machine

before the working area is clear and you
have a stable work surface.

PERSONAL SAFETY

Never use the machine if you are fatigued, while under
the influence of alcohol or drugs, medication or anything
that could aect your vision, alertness, coordination
or judgement.

• Check that no tools or other objects have been

left lying on the machine.

• Never allow anyone else to use the machine

without proper training.

• Always shut o the machine during longer

work breaks.

• Never work alone, always ensure there is

another person close at hand.

• Learn how to use the machine and its controls

safely and learn to how to stop quickly.
Also learn to recognize the safety decals.

• Keep handles dry, clean and free from

oil and grease.

• Do not overreach. Keep proper footing and

balance at all times.

• Never stand on the machine.

Stand upright. Keep distance between your
face and the cutting blade. Place both hands on the
work piece as far away from the cutting blade as
possible. If plunge function is used, place one hand on
the cutting handle.

MACHINE USE AND CARE

• This machine is designed and intended for
cutting brick, block and stone.
All other use is improper.

• Experience is very important when running
the machine. A skilled worker is highly
recommended.

• The machine is intended for use in industrial
applications by experienced operators.

• Check that the machine is assembled correctly
and does not show any signs of damage.

• Always perform daily maintenance before
starting the machine. See instructions in the
section “Maintenance”.

• Do not overload the machine. Overloading
can damage the machine.

• The blade shall be intended for the
material to be cut.

• If you are uncertain of what blade to use,
contact your local service dealer.

• Keep tools sharp and clean in order
to enable safer work.

• Keep all parts in good working order and ensure
that all fixtures are properly tightened. Replace
all worn or damaged decals.

• Never leave the machine unsupervised with
the motor running.

• Feed the work piece against the rotation of
the blade only!

• Observe care when lifting. You are handling
heavy parts, which imply the risk of pinch
injuries or other injuries.

ALWAYS THINK ABOUT YOUR WORK ENVIRONMENT
AND USE COMMON SENSE.

It is not possible to cover every conceivable situation
you can face. Always exercise care and use your
common sense. If you get into a situation where you feel
unsafe, stop and seek expert advice. Contact your dealer,
service agent or an experienced user. Do not attempt any
task or operation that makes you feel unsure whether or
not it is safe.

iQ1014S

2.2

Operator’s Manual

888-274-7744

www.iqpowertools.com