IqON IOS 100HD, IOS 200HD, IOS 300HD User Manual
User’s Manual
IOS 100HD
IOS 200HD
IOS 300HD
IqON User’s Manual
2
Contents
I. Before initial operation of the receiver ---------------------------------------------------------------- 5
1. Safety instructions -------------------------------------------------------------------------------------------------------- 5
2. Main Features -------------------------------------------------------------------------------------------------------------- 7
2.1. IQON ------------------------------------------------------------------------------------------------------------ 7
2.2. IOS 200HD ------------------------------------------------------------------------------------------------------------ 8
2.3. IOS 300HD ------------------------------------------------------------------------------------------------------------ 9
3. Packaging Contents ---------------------------------------------------------------------------------------------------- 10
4. Product Descriptions --------------------------------------------------------------------------------------------------- 11
4.1. IQON ---------------------------------------------------------------------------------------------------------- 11
4.2. IOS 200HD ---------------------------------------------------------------------------------------------------------- 13
4.3. IOS 300HD ---------------------------------------------------------------------------------------------------------- 15
4.4. Remote Control Unit (RCU) ------------------------------------------------------------------------------------- 17
II. Installation ---------------------------------------------------------------------------------------------------- 19
1. Connections TV, Audio, and Antenna ----------------------------------------------------------------------------- 19
2. Connecting your TV to the receiver --------------------------------------------------------------------------------- 19
3. Connecting your Hi-Fi audio to the receiver (optional) --------------------------------------------------------- 20
4. Connecting your dish antenna to the receiver ------------------------------------------------------------------- 20
III. Start wizard -------------------------------------------------------------------------------------------------- 21
1. Video output selection ------------------------------------------------------------------------------------------------ 21
2. Language selection ---------------------------------------------------------------------------------------------------- 22
3. Configuring Satellite Connection ----------------------------------------------------------------------------------- 22
4. Service scan ------------------------------------------------------------------------------------------------------------ 23
5. Parental Control -------------------------------------------------------------------------------------------------------- 23
6. Network ------------------------------------------------------------------------------------------------------------------- 24
IV. Basic Operation -------------------------------------------------------------------------------------------- 25
1. Turning your IQON on and off ----------------------------------------------------------------------------- 25
2. Service selection ------------------------------------------------------------------------------------------------------- 25
3. Switching Channel ----------------------------------------------------------------------------------------------------- 25
4. Controlling the volume ------------------------------------------------------------------------------------------------ 26
5. TV/Radio switching ---------------------------------------------------------------------------------------------------- 26
6. Program Information (Infobar) -------------------------------------------------------------------------------------- 26
7. Changing the audio track -------------------------------------------------------------------------------------------- 27
8. Subtitle -------------------------------------------------------------------------------------------------------------------- 27
9. Zoom ---------------------------------------------------------------------------------------------------------------------- 27
10. Teletext ------------------------------------------------------------------------------------------------------------------ 28
11. Channel List ----------------------------------------------------------------------------------------------------------- 29
IqON User’s Manual
3
12. Electronic Program Guide - EPG ------------------------------------------------------------------------------------ 33
13. Time Shift --------------------------------------------------------------------------------------------------------------- 34
14. Recording -------------------------------------------------------------------------------------------------------------- 35
15. Playing back a recording --------------------------------------------------------------------------------------------- 38
16. Managing Recording File -------------------------------------------------------------------------------------------- 39
17. Media Player ------------------------------------------------------------------------------------------------------------ 39
18. Plug-ins ------------------------------------------------------------------------------------------------------------------- 40
19. Sleep Timer ------------------------------------------------------------------------------------------------------------- 40
V. System Configuration ------------------------------------------------------------------------------------ 41
1. Main Menu --------------------------------------------------------------------------------------------------------------- 41
2. Setup ---------------------------------------------------------------------------------------------------------------------- 41
2-1. Service Searching ------------------------------------------------------------------------------------------------ 42
2-1-1. Tuner Configuration ---------------------------------------------------------------------------------------- 42
2-1-2. Default Channel List --------------------------------------------------------------------------------------- 42
2-1-3. Automatic Scan --------------------------------------------------------------------------------------------- 42
2-1-4. Manual Scan ------------------------------------------------------------------------------------------------- 43
2-2. System Configuration ------------------------------------------------------------------------------------------- 44
2-2-1. A/V Settings -------------------------------------------------------------------------------------------------- 44
2-2-2. Video enhancement settings ---------------------------------------------------------------------------- 46
2-2-3. Customize ---------------------------------------------------------------------------------------------------- 46
2-2-4. Record --------------------------------------------------------------------------------------------------------- 48
2-2-5. Subtitle Settings --------------------------------------------------------------------------------------------- 48
2-2-6. Audio Language Selection ------------------------------------------------------------------------------- 49
2-2-7. Audio Language Selection ------------------------------------------------------------------------------- 49
2-2-7. RF output ----------------------------------------------------------------------------------------------------- 50
2-2-8. Hard disk ------------------------------------------------------------------------------------------------------ 50
2-2-9. Network ------------------------------------------------------------------------------------------------------- 51
2-2-10. Input devices ----------------------------------------------------------------------------------------------- 55
2-2-11. Display Setup ---------------------------------------------------------------------------------------------- 55
2-2-12. Keyboard ------------------------------------------------------------------------------------------------------- 55
2-2-13. Recording patchs ----------------------------------------------------------------------------------------- 56
2-2-14. Language ------------------------------------------------------------------------------------------------------- 57
2-2-15. Timezone --------------------------------------------------------------------------------------------------- 57
2-2-16. CrossEPG -------------------------------------------------------------------------------------------------- 57
2-2-17. Timeshift Settings ----------------------------------------------------------------------------------------- 58
2-2-18. Skin ------------------------------------------------------------------------------------------------------------ 59
2-2-19. Fan control -------------------------------------------------------------------------------------------------- 60
2-3. Common Interface ----------------------------------------------------------------------------------------------- 60
2-4. Parental Control -------------------------------------------------------------------------------------------------- 60
IqON User’s Manual
4
2-5. Factory Reset ----------------------------------------------------------------------------------------------------- 62
2-6. Software Management ------------------ ----------------------------------------------------------------------- 62
3. System Information ---------------------------------------------------------------------------------------------------- 63
4. Update the software --------------------------------------------------------------------------------------------------- 64
4-1.USB Update -------------------------------------------------------------------------------------------------------- 65
4-2.Internet Update ---------------------------------------------------------------------------------------------------- 65
VI. Troubleshooting ------------------------------------------------------------------------------------------- 66
VII. Specifications -------------------------------------------------------------------------------------------- 67
IqON User’s Manual
5
I. Before initial operation of the receiver
1. Safety instructions
Please read the safety instructions completely and carefully, before using the IqON.
The Manufacturer takes no responsibility for damages as a result of incorrect handling of the IqON.
1.1 Connecting Power
• This product operates only in the range of AC 100V~240V and 50Hz/60Hz. Please check first your
power supply to see if it fits this range.
• Please be noted that you need to disconnect from the mains before you start any maintenance or
installation procedures.
• Make sure that the power cord is placed in a position where it is easy to unplug it from the mains in an
emergency.
1.2 Overloading
• Do not overload a wall outlet, extension cord or adapter as this may cause electrical fire or shock.
1.3 Liquid
• This product is not water-proof and should not be exposed to dripping, splashing, or any type of liquid.
• No objects filled with liquid such as base shall be placed on the product.
• Please do not clean the product with wet cloth, which may cause a short circuit.
• No wet objects should be placed near the product.
1.4 Ventilation
• Allow a sufficient space between the product and other objects to make sure air ventilation of the
product.
• Do not block the top or rear of the product with an object, which will close the ventilation holes and
lead to a high temperature of the system. This may cause a failure of the product.
• Do not stack other electronic devices on top of the product.
• Do not insert any kind of pointed objects like screw, gimlet, etc. into the ventilation holes of the
product.
This will damage the product.
1.5 Connecting the Satellite Cable.
• Disconnect the power of the product before you connect the satellite cable to the product.
Otherwise, it may cause damage to the LNB.
1.6 Grounding
• The LNB must be earthed to the system earth for the satellite dish.
IqON User’s Manual
6
1.7 Location
• Place the product indoor.
• Do not expose the product to rain, sun or lightening.
• Do not place the product near any heat appliances as a radiator.
• Ensure that there is more than 10 cm distance from any electrical devices & wall.
1.8 Lightening, Storm or Not In Use.
• Unplug the product and disconnect the antenna cable during a thunderstorm or lightening, especially
when left unattended and unused for a long period of time. This will prevent possible damages from
power surges or lightening.
1.9 Replacement of Parts
• Unauthorized part replacements, especially by one who is not a qualified technician may result in
damage to the product.
• Ensure that when part replacements are necessary qualified technicians perform the task using the
components specified by the manufacturer.
1.10 Hard Disk Drive
• Do not move the product or turn the power off suddenly while the Hard Disk Drive (HDD) is still
running. This may result in damage to the HDD and thus the system.
• The company shall not be liable for any corruption of data on the HDD caused by careless use or
misuse of users.
1.11 Battery
• There is danger of explosion if batteries are incorrectly replaced.
• Replace batteries only with the same or equivalent type.
1.12 Disposal instructions
This symbol on the product or on its packaging indicates that this product must
not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the
time of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment.
IqON User’s Manual
7
2. Main Features
2.1 IQON
• HD DVB-S/DVB-S2 Satellite Twin Tuner.
• Supporting MPEG-4, H.264 & MPEG-2 Compliant.
• 405MHz Dual Core Broadcom MIPS Processor.
• 2Gbit NAND Flash & 3Gbit DDR RAM.
• Advanced Linux Operating System.
• Full HD 1080p via HDMI.
• 10/100 Mbps Full Duplex Ethernet Interface.
• 1 x Smartcard Readers.
• 2 x Common Interface.
• 3 USB 2.0 Port (1x in front & 2x rear).
• Support Internal 3.5” SATA HDD.
• High Definition Video output : HDMI, Component (YPbPr)
• 2x SCART & RCA.
• 12 character VFD display with scrolling for local time or channel name.
• Dolby Digital Plus, Dolby True HD supported.
• S/PDIF Output for Digital Audio and Dolby AC-3 Bit Stream Output.
• Firmware/ Software Upgrade: Through (Ethernet, USB Memory Stick).
• Audio Decoding : ISO/IEC13813-3 (MPEG2 audio/MUSICAM) Dolby AC-3 WMA.
• Video output resolution: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p.
• 256 Color OSD, Supports DVB Teletext & Subtitle.
• User Friendly EPG (Electronic Program Guide).
• Automatic & Manual Service Scan supported.
• Multiple LNB control (DiSEqC) supported.
• Internal Power Supply.
• Very Low stand-by Power Consumption (<1W).
IqON User’s Manual
8
2.2 IOS 200HD
• HD DVB-S/DVB-S2 Satellite Twin Tuner.
• Supporting MPEG-4, H.264 & MPEG-2 Compliant.
• 405MHz Dual Core Broadcom MIPS Processor.
• 2Gbit NAND Flash & 3Gbit DDR RAM.
• Advanced Linux Operating System.
• Full HD 1080p via HDMI.
• 10/100 Mbps Full Duplex Ethernet Interface.
• 1 x Smartcard Readers.
• 1 x Common Interface.
• 3 USB 2.0 Port (1x in front & 2x rear).
• Support Internal 2.5” SATA HDD.
• High Definition Video output : HDMI, Component (YPbPr)
• 12 character VFD display with scrolling for local time or channel name.
• Dolby Digital Plus, Dolby True HD supported.
• S/PDIF Output for Digital Audio and Dolby AC-3 Bit Stream Output.
• Firmware/ Software Upgrade: Through (Ethernet, USB Memory Stick).
• Audio Decoding : ISO/IEC13813-3 (MPEG2 audio/MUSICAM) Dolby AC-3 WMA.
• Video output resolution: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p.
• 256 Color OSD, Supports DVB Teletext & Subtitle.
• User Friendly EPG (Electronic Program Guide).
• Automatic & Manual Service Scan supported.
• Multiple LNB control (DiSEqC) supported.
• External Power Supply.
• Very Low stand-by Power Consumption (<0.5W).
IqON User’s Manual
9
2.3 IOS 300HD
• HD DVB-S/DVB-S2 Satellite Tuner.
• Supporting MPEG-4, H.264 & MPEG-2 Compliant.
• 405MHz Dual Core Broadcom MIPS Processor.
• 2Gbit NAND Flash & 3Gbit DDR RAM.
• Advanced Linux Operating System.
• Full HD 1080p via HDMI.
• 10/100 Mbps Full Duplex Ethernet Interface.
• 1 x Smartcard Readers.
• 3 USB 2.0 Port (1x in front & 2x rear).
• HDMI & Scart Output
• LED display with IR & Recording Command.
• Dolby Digital Plus, Dolby True HD supported.
• S/PDIF Output for Digital Audio and Dolby AC-3 Bit Stream Output.
• Firmware/ Software Upgrade: Through (Ethernet, USB Memory Stick).
• Audio Decoding : ISO/IEC13813-3 (MPEG2 audio/MUSICAM) Dolby AC-3 WMA.
• Video output resolution: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p.
• 256 Color OSD, Supports DVB Teletext & Subtitle.
• User Friendly EPG (Electronic Program Guide).
• Automatic & Manual Service Scan supported.
• Multiple LNB control (DiSEqC) supported.
• Internal Power Supply.
• Very Low stand-by Power Consumption (<0.5W).
IqON User’s Manual
10
3. Packaging Contents
Please ensure that the following items are included with the receiver in our packing.
• User Manual
• Power cord (IOS 200HD : Apaptor)
• SATA Cable (IOS 200HD)
• Remote Control
• AAA X 2 batteries
IqON User’s Manual
11
4. Product Descriptions
4-1. IQON
◆ Front Panel
1. Power
: Switch between operation and standby modes.
2. USB 2.0 Port
: Connect to the External HDD or USB storage with USB cable. (Max. 500mA)
3. Display (VFD)
: Display current menu information and channel name etc.
4. Menu
: Open main menu & select sub menu using by navigation buttons.
5. Exit
: Close and return to the previous menu and screen.
6. OK
: You can enter a selected menu or function in Menu mode.
7. Left/Right Button
: To move cursor left/right in menu mode.
8. Up/Down Button
: To move cursor up/down in menu mode or to call up channel list in live mode.
9. Smart card reader
: To insert smartcard.
10. Common Interface Slot
: Two common interface module slots are provided.
IqON User’s Manual
12
◆ Rear Panel
1. LNB 1 IN : 1st satellite tuner input from the LNB on a dish antenna. Turn the receiver OFF first before
connecting.
2. Loop 1 OUT : Loop - through output of LNB1 IN for another satellite receiver. turn OFF the receiver to
watch an analogue program.
3. LNB 2 IN : 2nd satellite tuner input from the LNB on a dish antenna. Turn the receiver OFF first before
connecting.
4. Modem : Connect to a telephone line.
5. S/PDIF : Connect with an appropriate optical cable to your HiFi-Amplifier or DSP. The AC3 signal is
also available at this port in case the selected channel transmits Dolby Digital signals.
6. HDMI : Connect to TV using a HDMI cable for both audio and video signals.
7. Ethernet : Communication port via HTTP, FTP, NFS, Telnet and Samba to access your Hard Drive or
to upload channel lists. This is also used to update IQON's software.
8. 2x USB 2.0 Port : Connect to the External HDD or USB storage with USB cable (Max. 500mA).
9. RF OUT : Connect to TV or VCR.
10. Antenna IN : TV Antenna connection
11. Video Output : Connect to TV using RCA cable.
12. Audio Output : Connect to TV using RCA cable.
13. Component (YPbPr) : Connect to TV using Component cable.
14. Scart (TV/VCR) : Scart Cable to TV/VCR(AUX) connection (RGB,CVBS, YPbPr).
15. RS232 : RS232 serial data port is provided.
16. Power Switch : Turn AC Power On/Off.
17. Power Inlet : Connect the power cord.
IqON User’s Manual
13
4-2. IOS 200HD
◆ Front Panel
1. Power
: Switch between operation and standby modes.
2. Display (VFD)
: Display current menu information and channel name etc.
3. Channel Up/Down Button
: Navigates through the scanned channel list.
4. Volume Up/Down Button
: Increase/Decrease the volume.
5. USB 2.0 Port
: Connect to the External HDD or USB storage with USB cable. (Max. 500mA)
6. Smart card reader
: To insert smartcard.
7. Common Interface Slot
: A common interface module slot.
IqON User’s Manual
14
◆ Rear Panel
1. LNB 1 IN : 1st satellite tuner input from the LNB on a dish antenna. Turn the receiver OFF first before
connecting.
2. LNB 2 IN : 2nd satellite tuner input from the LNB on a dish antenna. Turn the receiver OFF first before
connecting.
3. S/PDIF : Connect with an appropriate optical cable to your HiFi-Amplifier or DSP. The AC3 signal is
also available at this port in case the selected channel transmits Dolby Digital signals.
4. Audio / Video Output : Connect to TV using RCA cable.
5. Component (YPbPr) : Connect to TV using Component cable.
6. HDMI : Connect to TV using a HDMI cable for both audio and video signals.
7. Ethernet : Communication port via HTTP, FTP, NFS, Telnet and Samba to access your Hard Drive or
to upload channel lists. This is also used to update IOS 200HD's software.
8. 2x USB 2.0 Port : Connect to the External HDD or USB storage with USB cable (Max. 500mA).
9. RS232 : RS232 serial data port is provided.
10. External Power Supply : Connect the power Supply (12V / 3A).
11. Power Switch : Turn AC Power On/Off.
12. Cooling Fan : With speed control function.
IqON User’s Manual
15
4-3. IOS 300HD
◆ Front Panel
1. Power
: Switch between operation and standby modes.
2. Up/Down Button
: To move cursor up/down in menu mode or to call up channel list in live mode.
3. Left/Right Button
: To move cursor left/right in menu mode.
4. OK
: You can enter a selected menu or function in Menu mode.
5. Menu
: Open main menu & select sub menu using by navigation buttons.
6. Display (LED)
: To show status of RCU and Recording.
7. Smart card reader
: To insert smartcard.
8. USB 2.0 Port
: Connect to the External HDD or USB storage with USB cable. (Max. 500mA)
IqON User’s Manual
16
◆ Rear Panel
1. LNB INPUT
: Satellite tuner input from the LNB on a dish antenna. Turn the receiver OFF first before connecting.
2. S/PDIF
: Connect with an appropriate optical cable to your HiFi-Amplifier or DSP. The AC3 signal is also
available at this port in case the selected channel transmits Dolby Digital signals.
3. HDMI
: Connect to TV using a HDMI cable for both audio and video signals.
4. RS232
: RS232 serial data port is provided.
5. Ethernet
: Communication port via HTTP, FTP, NFS, Telnet and Samba to access your Hard Drive or to upload
channel lists. This is also used to update IOS 300HD's software.
6. 2x USB 2.0 Port
: Connect to the External HDD or USB storage with USB cable (Max. 500mA).
7. TV Scart
: Scart Cable to TV connection (RGB,CVBS).
8. Power Switch :
Turn AC Power On/Off.
9. Power Inlet
: Connect the power cord.
IqON User’s Manual
17
5. Remote Control Unit (RCU)
1. MUTE : Mutes or unmutes the audio temporarily.
2. POWER : Switches between operation and standby.
3. HELP : Displays major important operation methods of IqON. This
provides users with a quick guide of using IqON.
4. HOME : Instantly moves to the top of the menu list.
5. END : Instantly moves to the bottom of the menu list.
6. TELETEXT : Displays the teletext information of the current
channel, if the channel provides teletext data.
7. SUBTITLE : Displays the subtitle of the current channel if the
channel provides subtitle.
8. Zoom : To zoom In/Out.
9. LIST : Displays the list of recordings stored on the internal HDD if
any.
10. MEDIA : Open media file list.
11. TIMER : Start timer function.
12. VOL. +/- : Increase/Decrease the volume.
13. EPG : Displays the Electronic Program Guide (EPG) information
if provided.
14. AUDIO : Select an audio track and a sound mode.
15. CH. +/- : Move in menus. In viewing mode, you can operate
CH+/- by pressing UP/DOWN button.
16. MENU : Open main menu & select sub menu using by navigation
buttons.
17. EXIT : Close and return to the previous menu and screen.
18. Navigation Keys : Navigates up/down and left/right on the menu
options. Up/down keys are used to call up the channel list.
19. OK : Select a menu, or confirms the selected operation. Also displays the channel list while
watching a program.
20. SAT : Open channel list according to satellite.
IqON User’s Manual
18
21. INFO : Displays the Electronic Program Guide (EPG) information if provided.
22. NUMERIC KEY (0~9) : Control the numerical operation and change the Channel/Service number
directly.
23. PREV (<) : Return to the previous channel/service or move to the end of the Service List or the
Play List.
24. NEXT (>) : Go to the next channel/service or move to the beginning of the Service List or the Play
List.
25. COLOR BUTTONS : Activates certain menu functions. Usage instructions are shown in each OSD
menu.
26. Fast Rewind(◀◀) : Fast rewinds at up to 128 times faster than the normal speed.
(x2 /4 /8 /16 / 32 / 64 / 128).
27. PLAY(▶) : Plays the selected file (e.g. recording) at the normal speed.
28. PAUSE(II) : Pauses the live program(Timeshift) or recording play.
29. Fast Forward(▶▶) : Fast forward up to 128 times faster than the normal speed.
(x2 /4 /8 /16 / 32 / 64 / 128).
30. TV : Displays the TV Channel list.
31. Recording(●) : Displays instantly the recording menu.
32. Stop(■) : Stops playing of a recording and goes to the live mode.
33. RADIO : Displays the Radio channel list.
IqON User’s Manual
19
II. Installation
This chapter will guide you through the whole installation process. Please read each section carefully to
make sure the system run properly.
1. Connecting TV, Audio, and Antenna
2. Connecting your TV to the receiver
● There are various types of connections, but please consider to follow the order below if available for
the best possible picture quality.
1. HDMI connector
2. Component(Y, Pb, Pr) connectors
3. SCART connector (RGB, YC, CVBS)
Please select RGB for the SCART TV item in the Audio, Video menu, if your TV supports this mode
because it is more clear than YC or CVBS.
● Using A HDMI Cable : If you have a HD television set, you should use a HDMI cable for the best
results. Plug receiver’s HDMI cable to the terminal marked “HDMI” on the rear panel of your receiver and
its other end to the TV HDMI input. In this case, you do not have to make audio connection because the
HDMI connector can output stereo audio or Dolby Digital audio.
● Using Component video cable : Plug the component video cable (RCA video cable) into the
IqON User’s Manual
20
appropriate RCA jacks on your receiver : Y (green), Pb (blue), Pr (red) according to the color of both sets.
● Using A SCART Cable : Plug the SCART Cable into the TV SCART outlet on your receiver : then
connect end to your TV.
3. Connecting your Hi-Fi audio to the receiver
● Connect RCA audio cable to the appropriate RCA input terminal of your external audio system and
connect the other end to the RCA audio port on your IQON.
● If you have digital audio equipment, you can connect it to Receiver using S/PDIF.
- Plug in the appropriate cable to the S/PDIF port on your IQON, and then connect the other end to
your digital audio equipment.
4. Connecting your dish antenna to the receiver
● This receiver has two tuners inside and there are two LNB inputs and one loop-through output of the
LNB1 IN.
● Please connect the appropriate satellite input to the LNB1 IN and/or LNB2 IN. The connection should
be matched in the Antenna Connection menu later.
● Please ensure that there is a connection to both the LNB1 IN and LNB2 IN connectors on your
receiver, so that both tuners work properly. You don’t need to use a loop cable from the LNB1 OUT to
the LNB2 IN connector because it will be connected internally according to the mode in the Antenna
Connection menu.
● If you want to use another satellite receiver, please connect the LNB input of the receiver to the
LNB1 OUT connector of this receiver.
IqON User’s Manual
21
III. Start wizard
When you turn on IQON for the first time after purchase, an installation wizard will begin step by step.
NOTE : OK key is used for confirmation and turns to the next step. Pressing exit key to return to the
previous page.
1. Video output selection
You will be shown different video output modes for roughly 10 seconds, after you have connected and
switched on your IQON. Once you see a clear picture on your TV screen press the OK button to select it.
If you prefer a different output than the selected one you can use the Navigations buttons up/down and
the OK button to select it.
You can choose from the following video output options:
1. HDMI : using a HDMI cable.
2. Scart : using a Scart cable.
3. YPbPr (YUV) : using a component cable.
Select your desired option with the Navigation
buttons up and down. Press the OK button to
activate.
You are taken to the next step.
You can now select the video mode.
The possible options strongly depend on the video
output mode you have selected in the step before.
Select your desired option with the Navigation
buttons up and down. Press the OK button to
activate.
You are taken to the next step.
2. Language selection
Select your desired language with the Navigation
buttons up and down. Press the OK button to
activate
Loading...