How it Works
IQCCTV
Loading...
IQR960D8
User Manual
82 pgs3.6 Mb0

IQCCTV IQR960D4, IQR960D8, IQR960D16, IQR960D32 User Manual

User Manual
Version 1
Touch Panel
Remote
Access
HD
HD
960H
HD 960H DVR with HDMI Output,
Real Time 960H Recording
and Mobile/Internet Access
Models:
IQR960D4 IQR960D8 IQR960D16 IQR960D32
HDMI
Output
960H
IQR960D32
2
Contents
Safety Instructions ……………………………………………………………. 5
Chapter 1. DVR Features ………………………………………………..…… 6
1.1. Features ………………………………………………………. 6
Chapter 2. Overview …………………………………………………………... 7
2.1. Front Panels ………………………………………………….. 7
2.1.1. 4/8/16 Channel DVR Front Panel …………………… 7
2.1.2. 32 Channel DVR Front Panel ……………………….. 8
2.2. Rear Panels ………………………………………………….. 10
2.2.1. 4/8 Channel DVR Rear Panel ……………………….. 10
2.2.2. 16 Channel DVR Rear Panel ………………………… 11
2.2.3. 32 Channel DVR Rear Panel ………………………... 12
2.2.4. RS485/Sensor/Alarm Port Functions ……………….. 12
2.3. 4/8 Channel Remote Controller …………………………….. 13
2.4. 16/32 Channel Remote Controller …………..……………... 14
2.5. Mouse Operation …………………………………………….. 15
Chapter 3. DVR Connection ………………………………………………….. 16
3.1. HDD Installation ……………………………………………… 16
3.2. Camera and Monitor Connection …………………………… 16
Chapter 4. DVR Boot Up ………………………………………………………. 17
4.1. System Initialization ………………………………………….. 17
4.2. Live Interface …………………………………………………. 18
Chapter 5. DVR Menu …………………………………………………………. 20
5.1. Pop Up Menu ………………………………………………… 20
5.2. Main Menu Guide ……………………………………………. 20
5.3. Main Menu ……………………………………………………. 22
5.3.1. Display …………………………………………………. 22
5.3.1.1. Live Mode ………………………………….. 22
5.3.1.2. Output Mode ………………………………. 23
5.3.1.3. Privacy Zone ………………………………. 24
5.3.2. Record Set …………………………………………….. 25
5.3.2.1. Record Parameters ……………………….. 25
5.3.2.2. Schedule …………………………………… 25
5.3.2.3. Main Stream ……………………………….. 26
5.3.3. Search …………………………………………………. 27
5.3.3.1. Record Search …………………………….. 27
5.3.3.2. Channel Select ……………………………. 27
5.3.3.3. Time Axis setup, file clip, zoom in/out ….. 28
5.3.3.4. Event Search ……………………………… 29
5.3.3.5. File Backup …………………………………. 30
3
5.3.3.5.1. Back-up File Based on Event …. 30
5.3.3.5.2. Back-up File Based on Time ….. 31
5.3.3.5.3. Play Back-up File ……………..... 31
5.3.3.6. Log Search ………………………………..... 32
5.3.4. Network …………………………………………………. 33
5.3.4.1. Network Set …………………………………. 33
5.3.4.2. Mobile Set …………………………………… 36
5.3.4.3. Router’s Port Forwarding ………………….. 36
5.3.4.4. Sub Stream …………………………………. 37
5.3.4.5. Email Set ……………………………………. 37
5.3.4.6. DDNS Set …………………………………… 38
5.3.5. System ………………………………………………….. 39
5.3.5.1. HDD Set …………………………………….. 39
5.3.5.2. PTZ Set ……………………………………… 40
5.3.5.3. General ……………………………………… 40
5.3.5.4. Users ………………………………………… 41
5.3.5.5. Information ………………………………….. 42
5.3.6. Advanced ………………………………………………. 43
5.3.6.1. Motion ………………………………….……. 43
5.3.6.2. Alarm Set …………………………………… 44
5.3.6.3. Maintain ……………………………………... 45
5.3.6.4. Event ………………………………………… 46
5.4. Menu Lock …………………………………………………….. 47
5.5. Split Mode …………………………………………………….. 47
5.6. PTZ Control …………………………………………………… 47
5.7. PIP Mode ……………………………………………………… 48
5.8. Record Search ……………………………………………….. 48
5.9. Mute …………………………………………………………… 48
5.10. Manual Record ……………………………………………… 49
5.11. Stop Record …………………………………………………. 49
5.12. Start Sequence .…………………………………………..… 49
5.13. Start Cruise ………………………………………………….. 49
Chapter 6. Web Application …………………………………………………... 50
6.1. ActiveX Control Download and Installation ……..……..….. 50
6.2. Web Application Manager Log-in ……………………….…. 52
6.3. Live Interface ……………………………………………….… 52
6.3.1. Menu Bar …………………………………………….… 53
6.3.1.1. Live Display ………………………………... 53
6.3.1.2. PTZ Control ………………………….…….. 54
6.3.1.3. Video Control …………………………….… 54
6.3.2. Playback ……………………………………………….. 55
6.3.2.1. Record Search …………………………….. 55
6.3.2.2. Playback Control …………………………... 56
6.3.3. Configuration …………………………………………... 57
6.3.3.1. Display Configuration ……………………… 57
6.3.3.2. Record ………………………………………. 58
4
6.3.3.3. Network Parameters ………………………. 59
6.3.3.4. System ………………………………………. 62
6.3.3.5. Advanced …………………………………… 64
6.3.4. Local Setting …………………………………………… 67
6.3.5. Logout ………………………………………………….. 68
6.4. Mobile Viewing Access Instructions ……………………….. 68
Appendices …………………………………………………………………..… 76 Appendix 1. Operation Function Table …………………………. 76
Appendix 2. Alarm Record Setting ……………………………… 78 Appendix 3. Troubleshooting ……………………………………. 79 Appendix 4. Usage Maintenance ……………………………….. 80 Appendix 5. Accessories ………………………………………… 81
5
Safety Instructions
1. Please read the instruction manual carefully before using the equipment.
2. Please make sure to use the PSU supplied with the DVR.
3. All equipment should be placed in an area away from water and moisture.
4. Do not install the DVR near any heat source, such as radiators, that produce
heat.
5. Please don’t use the equipment near a dusty area or near an intense magnetic field.
6. Before cleaning the equipment, unplug the unit from the wall. Please refrain from
using liquid aerosol cleaners and use a damp, soft cloth.
7. Please make sure to unplug the DVR during a lightning storm
8. Do not place the equipment on an unstable surface.
9. Please do not block any ventilation openings on the DVR.
IQCCTV IQ960DVR User Manual
6
Chapter 1 DVR Features
ns
1.1 Features:
! H. 264 video compression format: supports 1080P resolution
! G.711 audio compression format
! HD 960H, WD1, WHD1 and WCIF Recording Playback
! Embedded real-time Linux2.6 operation system
! VGA and HDMI Outputs
! Multiple alarm record modes
! Rear USB2.0 ports for back-up, recorder, upgrade and mouse operation
! Backup with USB, network or DVD (Optional)
! Mobile Phone Access
! Multiple language OSD
! Support auto-maintain
Function
Description
Real time
monitoring
Double video output: Monitor, VGA virtual output port or HDMI Output. Supports net-viewer and MP live surveillance and also supports zoom in/out, auto sequence and PIP display.
Recording
H.264 video compression format. The recording quality, resolution and frame rates are adjustable to user’s needs. Multiple recording modes (Constant, Scheduled, Manual, Alarm, Motion detection and remote record)
Recording
Storage
Supports a 3TB SATA HDD and saves real-time recorded images to HDD.
Playback
Supports DVR single CH and multiple CH Search/Playback of recorded files.
Backup
DVR backup via USB flash drive, removable drive, Recorder and network.
Alarm Setting
Supports HDD & video input alarm management and external alarm signal inputs. (8,16 and 32 Only)
Network
Operation
Supports remote surveillance by admin users to increase system security.
Mouse
Operation
Supports Mouse operation for faster menu navigation.
PTZ Control
Supports PTZ camera operations through RS-485.
IQCCTV IQ960DVR User Manual
7
Chapter 2 Overview
2.1 Front Panels
2.1.1. 4/8/16 Channel DVR Front Panel
Item
Key title or Indicator
Remark
Function & Description
1
Power Indicator
PWR
If the “Green” indicator is on the system is getting
power normally.
2
IR Receiver
Receives IR signal from Remote Controller
3
HDD Indicator
HDD
When the “Red” indicator flashes it means the hard
drive is being read or Recording
4
Channel select:
CH1 CH2 CH3 CH4
CH select key 5
REW Left Key
Move to left; Rewind function;
Decrease PTZ rotation speed and parameter value.
On preview mode, hold the button to switch GUI
operation device
6
FWD
Right Key
Right key, increase PTZ rotation speed and
parameter value and fast forward
7
Up key
Move up 8
Down key
Move down
9
PTZ/Enter
In the Menu, press this key to enter. Not in the menu,
PTZ operation
10
All channel display
Display all channels
1
2
3
4
5
11
12
13
7
6
8
9
10
14
IQCCTV IQ960DVR User Manual
8
2.1.2. 32 Channel DVR Front Panel
11
Play/Pause
Play record file, Pause record file
12
Rec/Stop
Begin record, stop record
13
Menu/ESC
Enter into main menu/exit Menu 14
USB
USB PORT
Item
Key title or Indicator
Remark
Function & Description
1
Power Indicator
If the “Green” indicator is on the system is getting
power normally.
2
IR Receiver
Receives IR signal from Remote Controller
3
HDD Indicator
When the “Red” indicator flashes it means the hard
drive is being read or written.
4
0~9
-
Number Key, Single channel display
CH10-CH32 select method: Firstly numeric key 1
and then other numeric key. For example, to get
CH16 display, firstly press 1, and then press 6.
5
CH+
CH Select Key, switch to next channel
6
CH-
CH Select Key, switch to previous channel
7
4CH Display Mode
Press this key to enter 4 channel mode. To view the
next 4 channel, press again.
IQCCTV IQ960DVR User Manual
9
8
SEQ
Display from CH1 to CH32. Options available are; 4
Channels turning, 9 Channels turning, 16 Channels
turning, 24 Channels turning and 32 Channels
turning and then come back to single channel
turning.
9
REW
Rewind function.
Decrease PTZ rotation speed and parameter value.
On preview mode, hold the button to switch GUI
operation device
10
Pause
Pause
11
FWD
Forward key.
Increase PTZ rotation speed and parameter value
and fast forward
12
Record
HDD video indicator
13
STOP
Stop Key - stop playing recorded files.
14
Menu/ESC
Enter into main menu/exit Menu
15
Left Key
Move Left
16
Up Key
Move Up
17
Down Key
Move Down
18
PTZ/Enter
When in menu mode, press this key to enter. When
not in the menu mode - PTZ operation
19
Right Key
Move Right
20
USB
USB Port
IQCCTV IQ960DVR User Manual
10
2.2 Rear Panels
2.2.1. 4/8 Channel DVR Rear Panel
Item
Physical port
Connection method
1
Video input
Connect CH1-4 or 1-8 (Virtual) video input device （ BNC
2
Video output
Connect monitor output (BNC interface)
3
Audio Input
4/8CH Audio input (RCA interface）
4
Audio Output
Audio output (RCA interface）
5
USB Port
Connect USB device (Flash Drive, Hard Drive and Recorder etc)
6
USB Port
Connect USB mouse
7
VGA Port
Connect to VGA monitor, such as PC monitor (Optional)
8
RS-485/Sensor/AI
RS485/Sensor. Alarm Interface on 8 Channel Only
9
Power Port
Connect power supply - DC12V 3A
10
Ethernet: Port
Connect LAN, Ethernet (RJ45 interface)
11
HDMI Port
Connect HDMI Cable
1
3
2
4 5/67
8
9
10
11
1
3
2
4 5/6
10
7
8
9
11
IQCCTV IQ960DVR User Manual
11
2.2.2. 16 Channel DVR Rear Panel
Item
Physical port
Connection method
1
Video input
Connect CH1-8 (Virtual) video input（BNC interface）
2
Video output
(UP) Main video output; (Down) Spot output (BNC interface)
3
Audio Input
16CH Audio input (RCA interface）
4
Audio output
Audio output (RCA interface);
5
Ethernet: Port
Connect LAN, Ethernet (RJ45 interface)
6
RS-485/Sensor/Alarm
RS485/Sensor/Alarm interface (see pin outs below)
7
Power Switch
Turn Power on and off
8
VGA Port
Connect to VGA monitor, such as PC monitor
9
HDMI
HDMI Output
10
USB Port
Connect USB mouse
11
Power Port
Connect power supply - DC12V 5A
1
3
2
4 5
6
7
8
9 10 11
IQCCTV IQ960DVR User Manual
12
2.2.3 32 Channel DVR Rear Panel
2.2.4 RS485/Sensor/Alarm port functions
• Alarm input: Connect [-] port of your sensor to G (GND) pin, and [+] port to channel input according to the alarm device you purchased.
• Alarm output: Connect to the two ports marked with “out”
• PTZ Port：Connect your camera to RS-485A and RS485B accordingly.
Item
Physical port
Connection method
1
Video input
Connect CH1-16 (Virtual) video input（BNC interface）
2
Audio input
Connect CH1-16 audio input（BNC interface）
3
Video output
Connect monitor output(BNC interface)
4
Audio output
Audio output (BNC interface）
5
LOOP output
LOOP Output
6
HDMI
HDMI Output (Optional)
7
Ethernet: Port
Connect LAN, Ethernet (RJ45 interface)
8
RS-232
RS-232 Output
9
VGA Port
Connect to VGA monitor, such as PC monitor
10
RS-485/Sensor/Alarm
RS485/Sensor/Alarm interface (see pin outs below)
11
USB Port
Connect USB mouse
12
Power Port
Connect Power
13
Power Switch
Turn Power on and off
1
52 4
3
6 7 1189
10
12
13
IQCCTV IQ960DVR User Manual
13
2.3. 4/8 Channel Remote Controller
Item
Key title
Key function
1
1-8
Channel select 1-8; Numeric key
2
9、0
Numeric key; Clicking numeric “0” allow you switch to output device
3
ALL
Multiple display mode
4
Menu
Enter into Main menu/Exit
5 ▲ Up arrow key, Volume adjust
6 ▼ Down arrow key, Volume adjust
7 ◄/
Left/Down key, Decrease/increase parameter value of control bar
8 SEL
Select key/Edit key; Confirm the selected operation.
9 Rewind key
10 Enter into record search menu; Play key
11 Forward key
12
●
Record key
13 Pause/Sequence key
14 ■ Stop manual record; stop playing
15
Audio
Testing
16
Mute
Mute on/off
IQCCTV IQ960DVR User Manual
14
2.4. 16/32 Channel Remote Controller
Key Title
Key Function
REC
Press the button to enter into manual record.
SEARCH
Press the button to enter into record search menu
2×2
Enter into Quad display
3×3
Enter into 9-split display
4×4
Enter into 16-split display
5x5
Enter into 24-split display (32 Channel Only)
AUTO
Enter into dwell time display
0~9
Channel select; numeric key
DISPLAY MODE
Multiple CH display (Quad, 9-split, 16-split and full screen display）
▲
Up direction key
▼
Down direction key
◄/
Left/right direction key. Also decrease/increase parameter value of control bar.
ENTER
Select [Enter] / [Edit] operation
Menu/ESC
Enter into/exit Main menu
PIP
PIP display mode
MUTE
Mute key
FWD
Forward（x2, x4, x8）
REW
Rewind（x2, x4, x8）
PLAY
Enter into record search, play record event
STOP
Stop play / manual play
PAUSE/
FRAME
Pause / play frame by frame
SLOW
(1/2, 1/4, 1/8）Slow play
Z+
Zoom out video area
Z-
Zoom in video area
F+
Extend focus
F-
Extend focus
I+
Increase PTZ brightness
I-
Decrease PTZ brightness
PTZ
Allow you set preset bit and control PTZ.
LOCK
Lock system
IQCCTV IQ960DVR User Manual
15
2.5. Mouse Operation
TYPE
Function
Click left key of
Mouse
In menu lock mode - Enter into pop-up menu and click any sub
menu to go into the Log-in window.
In menu unlock mode - Enter into pop-up menu, and then clicking
left key to enter into any sub menu directly.
After entering into main menu, click the left key to enter into any sub
menu. On [Detailed file] menu mode, click the left key to playback one
recording file.
Change the status of check box and motion detection area.
Click the combo box to access pull-down menu. Click left key to stop
dwell time display when dwell time display is activated.
By clicking left key you can adjust the colour control bar and volume
control bar.
Clicking combo box to access pull-down menu
By clicking the left key you can select values in edit boxes or pull-down
menu. Mouse supports special symbols, numeric and character input.
Use instead of [Enter- ] or [Backspace ]
Click right key of
Mouse
In live display mode, clicking right key will display pop-up menu
In the main menu or sub menu mode, clicking right key will exit current
menu.
Double-click Left
key of Mouse
In live display or playback mode, double-clicking left key will
maximize the screen.
Moving Mouse
Select menu item
Sliding Mouse
On motion mode, sliding mouse will select motion area.
On [Colour set] menu mode, sliding the mouse will adjust colour
control bar and volume control bar.
IQCCTV IQ960DVR User Manual
16
Chapter 3 DVR Connection
3.1 HDD Installation
Caution： Please do not Install or take out hard drive when DVR is running.
HDD Installation
(1) Cut power to the DVR (2) Unscrew the screws and open DVR upper cover carefully (3) Insert the Power Cord and data cable into Pin of hard drive securely (4) Remove the screws on the HDD bracket. (5) Fix the HDD to the bracket and then fix the bracket with HDD to DVR body (6) Put the upper cover back carefully and re-attach the screws
Please Note: If the user requires a higher performance HDD, please contact the place of purchase.
3.2 Camera and Monitor Connection
To connect camera a cable to the BNC video inputs at the rear of the DVR. To connect the DVR to a monitor via the HDMI/VGA Video output connection.
If the camera is a PTZ speed dome, you can connect the RS485 A & B to the corresponding port of the DVR (refer to system figuration on Chapter 8).
IQCCTV IQ960DVR User Manual
17
Chapter 4 DVR Boot Upa4: DVR Boot up
4.1 System Initialization
After powering the DVR and pressing the Power button on the front panel, you will enter into the system initializing screen shown as below.
After initialization, the setup wizard will begin.
1. HDD Management
As shown in below, the user can set the HDD management, record schedule and network configuration. In this option, the user can also select the overwrite types and format the HDD.
2. Record Schedule
Set the record schedule with the options shown below.
IQCCTV IQ960DVR User Manual
18
3. System Configuration
In this section the user can set the time, date DST and NTP as shown below.
4. Network Configuration
Set the network configuration as shown below.
4.2. Live Interface
After finishing setup wizard the system will enter into <Live> screen. The image below shows the 16-split display defaulted by system. In Live mode, double-click the mouse over the live image of any channel and the image will be maximized to full screen. By double-clicking again, the image will be come back to the 16-split display mode. Clicking the right button of the mouse to enter into the Pop-up Menu.
Once in the Pop-up menu, click the left button of the mouse to select menu items. To exit this menu, click anywhere outside the menu area.
IQCCTV IQ960DVR User Manual
19
Please Note: When the internal HDD is not connected or an error occurs, the character “H” will appear on the first channel of the live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter into [Main menu-Alarm] to set HDD loss and alarm output to “off”.
IQCCTV IQ960DVR User Manual
20
Chapter 5 DVR Menu
5.1 Pop-up Menu
After finishing system initialization, click the right key of mouse on the main interface mode to enter into Pop-up Menu. In this menu, the user can change parameter setting and operate the Main Menu, Multi-Pics, PTZ, Auto Cruise, Zoom in/out, Rec. Search, Manual record, Sequence, PIP and Vo Switch.
Click the [0] key on the remote controller or hold [Esc] key on the front panel to switch the system to other output device.
5.2 Main Menu Guide
Please see the following page for the main menu guide.
IQCCTV IQ960DVR User Manual
21
Search
Record Search
Event Search
Backup
Log search
Display
Output Set
Main Menu Live set
Privacy Zone
Clip Set
Record Parameters
Schedule
Main Stream
Record
Sub stream
Network Set
Email Set
Mobile(Set(
DDNS Set
Network
Motion Detection
Alarm set
Alarm
Device
PTZ set
Serial Set
HDD
Maintain
Advanced
Event
System
Users
System Information
General
IQCCTV IQ960DVR User Manual
22
5.3 Main Menu
On <Live> mode, click the [Menu] button on the front panel or Remote controller to enter into the Main menu interface. In Main Menu mode, you can control device management settings, such as Display, Record, Network, Search, System and Advanced setting.
5.3.1. Display
5.3.1.1 Live mode
To enter the Live Mode menu, go to <Main menu "Live> option and enter into the <Display> setting interface shown as below.
# Channel: Choose which Channel to view # Name: Change the channel name (allows up to 8 characters) # Position: Setup the display position of each channel. # Color: Click [Setup] option to enter into the [Colour setup] interface shown as Picture 5-2. # Covert: Enable [Live] surveillance screen # Show time: Enable the system time to appear in the <Live> screen. # Record time: When the record time is set to “Enable”, you are allowed to record the system
time into the recording history.
# Copy: Copy all data of one channel to any other one
Picture 5-2
IQCCTV IQ960DVR User Manual
23
1、 Click [APPLY] button on the bottom of the sub-menu windows to accept the changes and
click the [OK] button when prompted to save.
2、 If you want to cancel the modification, click [Exit] button to exit the menu. 3、 When clicking [DEFAULT] button, all the system default values will be reset to default
value.
5.3.1.2 Output mode
To enter the output mode menu, go to [Main menu"Display"Output] to enter into the output set interface shown as shown below.
# Video output: Supports CVBS output Live and Spot mode simultaneously. Live mode is the
main output, and Spot is the auxiliary output.
# CH Sequence: This option is defaulted to “Off” and the sequence time is 5 seconds. The
user can activate the option as desired.
# Rotate time: Allows the user to set the sequence time. Minimum time can be set to 3
seconds.
# VGA/HDMI Resolution: Select VGA or HDMI output, including 800x600, 1024x768,
1280x1024, 1440x900 and 1920 x 1080.
# Display Mode: Live output: display window will include Single, Quad, 9-split and 16-split
mode; Spot output: Display window will include Single, Quad and 9-split mode.
# Transparency: Adjust the menu’s transparency. Range is 1~128. # Margin: Adjust the whole screen’s margin. Details operations please refer to the Picture 5-4. # Volume: Adjust the DVR volume.
IQCCTV IQ960DVR User Manual
24
Picture 5-4
Click the [Live] button to pop up the interface as shown in Picture 5-5. This allows the user to perform a channel sequence setting.
Similarly, Click the [Spot output] option and set relative parameters.
5.3.1.3 Privacy Zone
This function allows the user to setup privacy zone parameters, as show in the image below. Each channel can have up to four privacy zones. Follow below steps to set:
1. Select the area no (Area 1 ~ Area 4)
2. Click [Setup] to adjust position of mask area
3. After finishing position adjust, click right key of mouse to return back [Privacy zone] interface
4. Click [Apply] to save the above setting.
Picture 5-5
IQCCTV IQ960DVR User Manual
25
5.3.2 Record set
5.3.2.1 Record parameters
Click [Main menu"Record"Record Para] to enter into the interface shown in the image 5-7 below.
# Channel: Setup the channel desired. # Record: Set up the record status. Enable/Disable of each channel # Pack Duration: Indicates the maximum continuous record time (15, 30, 45 and 60 min).
5.3.2.2 Schedule
Click the [Main Menu"Record"Schedule] to enter into the interface as shown below. The [Channel] option allows the user to select any desired channel. To setup weekly schedules, check the box of the record status you want (Alarm, General, or No Record) and then click on each box in the schedule time line that you want. Click the [Copy – To] pull-down menus and Copy button to copy settings from one day to any other day.
Picture 5-7
Loading...
+ 57 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use