IQAir HealthPro Compact User Manual

User Manual

HealthPro® Compact

Swiss Made

Important Safety Instructions

105.10.10.12 / 091216

About This User Manual

Congratulations on your purchase of this IQAir high-performance air cleaning system. Please study this user manual carefully to familiarize yourself with the special features and functions of your IQAir system and keep it in a safe place for future reference.

Read these instructions before using the air cleaner:

• Do not use this air cleaner as sole protection against harmful pollutants.

• Do not immerse the air cleaner in water or other liquids.

• Always disconnect the power from this air cleaner by unplugging the power cable before adding or removing

parts and before cleaning.

• Do not operate this air cleaner if it has a damaged cord or plug, if the motor fan fails to rotate, if it is not working properly, if it has been dropped or damaged, or dropped into water.

• If the power cord of this air cleaner should become damaged, it may be replaced with a similar two-pole cord, as is commonly used for computers and similar air cleaners.

• Only use this air cleaner for its intended purpose of air cleaning in non-industrial environments.

• Do not use this air cleaner in areas with very high concentrations of dust or powder to prevent the danger of dust

explosions.

• Do not use this air cleaner in explosive areas.

• Do not use attachments or lters not recommended by IQAir.

• Do not use outdoors.

• Do not obstruct the air inlet and air outlet of the air cleaner.

• Do not place the air cleaner on a soft surface such as a bed or other soft furnishings.

• Only use this air cleaner in an upright position.

• Do not place next to a humidier.

• Keep the power cord away from heated surfaces.

• Save these instructions for future reference.

The IQAir Group reserves the right to change specifications contained in this document at any time and without prior notice.

EvenFlow are trademarks of The IQAir Group. IQAir systems and filters are protected under U.S. patents 6 001 145 and 6159 260. Other U.S.,

European and Asian patents pending.

Table of Contents

Page

Important Safety Instructions 1

Chapter 1 – Air Cleaning Systems and Indoor Air Quality 4

1. 1 Improving Indoor Air Quality 4

Chapter 2 – Setting Up 5

2. 1 Unpacking 5

2. 2 Choosing a Suitable Location 6

2. 3 Connecting to Power 6

2. 4 Fitting and Removing Casters 7

Chapter 3 – The IQAir® System’s Components 9

3. 1 Description of Housing Components 9

3. 2 Description of Removable Components 10

3. 3 How the IQAir System Works 10

Chapter 4 – Using the Control Panel 11

4. 1 Description of Control Panel 11

4. 1. 1 Description of Control Panel Keys 11

4. 2 Control Panel Locking Function 12

4. 3 Fan Speed and Air Delivery 12

4. 3. 1 Regulating Fan Speed 12

4. 3. 2 Air Exchange Rates in Differently Sized Rooms 13

4. 4 Using the Menu Functions 13

4. 4. 1 Menu Overview 13

4. 4. 2 Filter Life Monitor 14

4. 4. 3 Setting the Auto Timer 15

4. 4. 4 Day-of-the-Week Timer 16

4. 4. 5 Timer ON/OFF Fan Speed Selection Menu 16

4. 4. 6 Timer Information in the Control Panel 17

4. 4. 7 Time & Day Setting 18

4. 4. 8 Filter Life Reset (New Filter) 18

4. 4. 9 Changing the Airflow Units 19

4. 4. 10 Language Setting 19

Chapter 5 – Using the Remote Control 20

5. 1 Description of Remote Control Elements and Functions 20

5. 2 Getting the Best Transmission Results 20

5. 3 Replacing the Remote Control Battery 21

Chapter 6 – Replacing Filters 21

6. 1 Location of the Filters 21

6. 2 Ordering Replacement Filters 21

6. 3 Opening and Closing the Housing 22

6. 3. 1 Troubleshooting When Closing the Housing 22

6. 4 Replacing the Pre-Filter (Filter 1) 22

6. 5 Replacing the HyperHEPA Filter (Filter 2) 24

6. 6 Discarding Used Filters 24

Chapter 7 – Maintenance 24

7. 1 Cleaning the Housing 24

7. 2 Maintenance-Free Fan 24

7.3 Technical Support and Repairs 25

7.4 IQAir Warranty 25

Chapter 8 – IQAir® Optional Accessories 25

Technical Specifications 26

Chapter 1 – Air Cleaning Systems and Indoor Air Quality

1.1 Improving Indoor Air Quality

Air cleaning can play an important role when it comes to improving indoor air quality. However, it should be noted that air cleaning should be used in conjunction with pollution source control and ventilation, wherever possible.

Strategy to improve indoor air quality

To tackle any indoor air quality problem, keep the following three-step strategy in mind:

1. Eliminate or reduce the air pollution source as much as possible. Source control is by far the most effective way to improve indoor air quality, since it sets out to deal with air pollution at the point of origin.

2. Ensure that sufcient fresh air is entering the room from outside. Air cleaners are not a substitution for sufcient ventilation. They are not able to reverse the conversion of oxygen (O

) into carbon dioxide (CO2), caused by

breathing and combustion processes.

3. Ensure the IQAir system can clean enough air to cope with your room size. The actual hourly air volume cleaned by the system should be at least double the air volume of your room. If the rate at which pollutants enter the room air is high or the indoor air quality requirements are stringent, the hourly air delivery of the system needs to exceed the room air volume several times. To achieve that level of air turnover, it may be necessary to employ more than one IQAir system, or employ an IQAir HVAC filtration system. (Refer to section 4.3.2)

Air Cleaning Results

Although air cleaners may be advertised and sold to be suitable for use in specic indoor environments and to deal with specic indoor air quality problems, the manufacturer and distributors make no claim as to the specic air cleaning results that are achieved under the user’s individual operating conditions. The air quality improvements that can be realized with the IQAir system (as with any air cleaner) in indoor environments depends to a signicant degree on circumstantial factors which are out of the control of the manufacturer or distributors. Important factors which will influence the air quality improvements that can be achieved in an indoor environment with an air cleaner include:

• Type of air pollutants present and their filtration efficiency

• Intensity of the pollutant source(s)

• Pollutant concentration

• Size of the indoor environment (room size)

• Operating speed of the air cleaner

• Number of air cleaners placed in the indoor environment

• Saturation state of the lters in the air cleaner

Consult a qualied specialist to determine an effective and comprehensive indoor air quality strategy.

Caution: Intense concentration of pollutants may cause filters/cartridges to saturate or expire early.

Chapter 2 – Setting Up

2.1 Unpacking

To unpack the IQAir system, open the top of the box and remove the square styrofoam pad which contains all accessories and product literature. Lay the box on its side, hold the system by the handle and pull it out of the box. Remove the plastic bag and foam belt. Keep the packaging for future transport and service needs.

User Manual Certiﬁcate of

Performance

QuickStart Guide

User Manual

HealthPro®Compact

Swiss Made

IQAir Advanced Air Cleaning System

Set of CastersRemote Control

Including Battery

Technical Support

Should technical problems arise during or after the warranty period, please contact your point of purchase or the IQAir Solution Center at:

IQAir North America, Inc. 10440 Ontiveros Place, Unit 1 Santa Fe Springs, CA 90670 Phone: 1–877–715–4–AIR (247) Fax: 1–562–903–7601 e-mail: support@iqair.com

To expedite your service request, please have the following information ready when contacting us:

IQAir model, shell number and serial number (found on the base of the unit and on the certiﬁcate of performance) Your details (name, address, phone, e-mail) Point of purchase (name of dealer, city) Date of purchase Description of problem

How to Register your IQAir System

Please complete and return the below card soon after purchase. The information will allow us to provide you with a swift service should service work become necessary. At your request we will also keep you up-to-date with technical and promotional information relating to your IQAir system. (The shell and serial numbers are located on the base of the unit)

Shell No:    Serial No.: .

Your name Company

Address

City/Town State/Province Zip/Postal Code

Dealer name Address

City/Town State/Province Zip/Postal Code

Purchase date

Reason for using IQAir

Room in which IQAir is mainly used

If you would like to be notified about new IQAir products and promotions please enter your e-mail address or

phone number here:

Please detach this card and send it to the address printed on the reverse side. Alternatively you can fax this page to 1–562–903–7601 or register on the IQAir website www.iqair.com.



Technical Support and Warranty Registration

Warranty Registration Card

(All information is treated conﬁdentially and will not be supplied to 3rd parties.)

Technical Support /

Warr anty

Referral Program

Information

HealthPro Series DVD

Air

IIQ

Cer

tiﬁcate of Perer

for

tiﬁcate of P

Shell No.:

AGUA 00

Serial No.:

Published Air Delivery Actual Air Delivery

Speed 1:

Speed 2:

Speed 3:

Speed 4:

Speed 5:

Speed 6:

mance

for

mance

Testing carried out by:

Signed:_________________

Testing & QC Dept.

cfm

Speed 1:

cfm

Speed 2:

cfm

Speed 3:

115

cfm

Speed 4:

150

cfm

Speed 5:

180

cfm

Speed 6:

240

cfm = cubic feet per minute

Page 1of 2

1AGUA0000/040603/105600000

Cer

IQAir Model:

HealthPro Compact

Test Voltage/Frequency:

120V / 60Hz

This certiﬁes that the aforementioned air cleaning device has been tested prior to packaging at the IQAir production facility in Switzerland. This particular device has been found to be in compliance with the model’s published speciﬁcations for air delivery and particle ﬁltration efﬁciency. This particular device has passed the particle leakage test.

I. Air Delivery Rate

The aforementioned device has been tested for its air delivery at all fan speed settings. Due to component tolerances, a divergence of 10% + 10 cfm is deemed acceptable.

Note:

The air delivery rate refers to the unit’s initial air delivery, which will decrease as ﬁlters load up with dust particles.

Measuring instrument: Alnor LoFlo Balometer. Instrument accuracy: ±(3% + 2 cfm).

Tell a F riend a bout IQ Air®…

… and receive a free pre-ﬁlter

for ever y new I QAir®customer referral !

Quick-Start Guide:IQAir®HealthPro®CompactPlus

Thank you for choosing an IQAir advanced air cleaning system.This quick-start guide will assist you in getting started with your IQAir in a matter of minutes.To access some of the more advanced features of your IQAir system,such as the timer programming,please refer to the user manual.

(We recommend that you familiarize yourself with the safety instructions in the user manual before first use).

Your IQAir HealthPro system is supplied with the following items:

• User Manual

• Certificate of Performance (individually numbered and hand-signed)

• Warranty/Product Registration Card

• IQAir Referral Program Card

• Power Cord,Remote Control (incl.batteries),set of 4 casters

Setting Up Your IQAir System

A) Unpacking

To unpack your IQAir system,open the top of the box and remove the user manual,certificate of performance and the styrofoam pad.Lay the box on its side an pull the IQAir out by its top handle. Place the system in its upright position and remove all packaging materials.The power cable, remote control,batteries and set of casters are supplied in a seperate carton contained in the box.

B) Installing the casters

Installing the optional casters is not necessary,however,it may facilitate moving the air cleaner from room to room.Please refer to the leaflet supplied with the casters for installation instructions.

C) Choosing a suitable location

The IQAir system should be positioned as centrally as possible in the room where the clean air is desired.

cfm

D)Connecting the IQAir system to the power supply

Plug the connector-end of the power cable into the base of the IQAir system.Locate a suitable wall socket and connect the power cable.The IQAir system is now in standby mode ready to be switched on.

Using the Electronic Control Panel

A) Switching the IQAir system on and off

To switch the system on or off,simply press the “power”button, located on the far left of the control panel.

B) Regulating the fan speed

To select the desired fan speed,simply press the “arrow”button on the control panel.When the top speed has been reached,the display will start again at the lowest fan speed.

C) Determining the appropriate fan speed

To achieve a significant air quality improvement,the IQAir system should be allowed to filter the room’s air volume at least twice per hour at the selected fan speed.Please refer to the Air Exchange Rate Charton this guide to determine how many air changes per hour can be achieved in differently sized rooms at the various fan speed settings.

Chapter 2 – Setting Up

2.2 Choosing a Suitable Location

When choosing a suitable location for the IQAir system, keep the following considerations in mind:

• Choosing the most suitable room for the

system will depend on where you would like the focus of the air cleaning efforts. Two main considerations are the time you spend in a particular room and the location of the main air pollution sources. As a general rule, the closer the system is located to the air pollution source, the better the air cleaning performance in the room.

Although an air cleaning result may be achieved in adjacent rooms, the main air cleaning will take place in the room where the system is located. For the best air cleaning results in adjacent rooms, make sure that doors to these rooms are left wide open.

• For best performance, the system should be positioned at least 12 inches (1 foot) away from the nearest vertical

surface, such as a wall or a cupboard. In general, the more centrally the system is positioned, the better the performance.

• Position the system close to a power outlet and make sure that the power cord is positioned in a way that it does

not present an obstacle in walkways.

• Make sure that the system is positioned in such a way that the control panel is easily accessible.

2.3 Connecting to Power

1. Plug the connector end of the power cord into the recessed power inlet socket on the back of the system.

2. Plug the other end of the power cord into a power outlet or power strip. Important: The only way to disconnect power completely is to unplug the power cord. If the system is disconnected from the power supply for more than one hour, the current day and timer will need to be reset.

Do not use the IQAir system when the power cord becomes damaged. The power cord may be replaced with an approved cord with a two-pole plug. Replacement cords are available from IQAir.

IQAir

min. distance 12” (1 foot)

Control panel should be easily accessible

Keep power cord clear of walkways

Power cord plug

Power cord connector

Power inlet socket

Power outlet (with or without grounding)

2.4 Fitting and Removing Casters

Chapter 2 – Setting Up

Attaching the supplied casters is optional. They make it easy to move the air purifier between rooms.

The caster kit consists of:

1. mounting rail (x 2)

2. casters (x 4)

For installation simply follow the below instructions:

Turn the device upside down on a soft and clean surface.

Place the mounting rail on the purifier’s base so that the holes line up with the black connector pins on the base. The cut-ins should face the center of the unit.

Press down until the mounting rail snaps into place. Repeat with second rail.

Place the caster onto caster pin.

Press on caster, until it snaps into place. Repeat steps 4 and 5 with the remaining casters.

Ensure that each caster is securely fitted before placing the air purifier in its upright position onto the casters.

crescent-shaped

cut-ins

Removing Casters From Your IQAir® Air Purifier

Chapter 2 – Setting Up

Switch the device off.

Remove each caster from the rail by pulling it straight off. The caster pins will be exposed.

There are two slotted tabs on each rail.

Using a flat-head screwdriver, press firmly into the slotted tab.

Use the screwdriver to gently loosen and lift the rail away from the base. Lift the rail out by hand. Repeat steps 5 and 6 for the second rail.

Turn the device upside down on a soft and clean area or surface.

Chapter 3 – The IQAir® System’s Components

3.1 Description of Housing Components

The IQAir system features a modular tower design in which all important ﬁltration and air moving components are positioned vertically in-line, i.e. stacked on top of another. Air is drawn into the system at the base, and passes through several ﬁlter stages to be returned to the room via the diffuser on top of the system. The housing modules are held together by two locking arms.

• The base with its arched design features air intake openings on two sides.

• The pre-filter module consists of frame 1 and the Pre-Filter which is ﬁxed inside the frame by four ﬁlter

clamps.

• The fan assembly comprises two housing modules with the centrifugal fan inside.

• The HyperHEPA ﬁlter module consists of frame 2 and the HyperHEPA ﬁlter.

• The EvenFlow diffuser contains omni-directional air outlet openings.

• The handle on top of the diffuser is designed for carrying the IQAir system.

• The locking arms hold the housing elements together. When opened, the locking arms allow easy access

to all ﬁlters.

EvenFlow Diffuser

Pre-Filter Frame (Frame 1)

Fan Assembly

HyperHEPA Filter Frame (Frame 2)

Locking Arms

Base

Handle

Air Intake Opening

Air Outlet Openings

Control Panel

+ 19 hidden pages

IQAir HealthPro Compact User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual