IQ Touch L Series User Manual

1

IQTouch L Series

——User Manual——

2

Content

Charter1: Notic e ............................................................................ 3

Charter2: Ports and Buttons .......................................................... 4

Charter3: Remote Control ............................................................. 6

Charter4: Communication Protocols Basic Operation .................... 7

Charter5: Product Installation and Testing..................................... 7

5.1 Connect Device with external PC ............................................................................. 7

5.2 Connect Device to built-in OPS ................................................................................ 9

Charter 6: Menu Functions .......................................................... 10

Charter7: Pull-up Menu ............................................................... 14

Charter8: Android Interface ......................................................... 14

Charter9: Built-in OPS /External Computer Interactive Function .. 17

Charter10: Troubleshooting ......................................................... 18

3

Charter1: Notice

Thanks for purchasing our IQ product. This product has been tested before shipping, but

incorrect using may lead to fire hazard. For safety, please read these instructions

completely before using the equipment.

- Be strictly adhered to all instructions when operating the product, which has dangerous
high voltage inside the product.

- Only use attachments/accessories specified by the manufacturer.

Safety Instructions:

- Protect the power cor d fr om being t read upon or pinche d ot herwi se it may ca use haz ard.

- Please keep your hands dry when unplug the power cord from the outlet.

- Keep the device away from over-heated, over-cooled or damp environment, and don’t
place the device under dir ect s unshine.

- Holes on the casing are designed for ventilation and heat dissipation. To gain fully
ventilation, please always keep at least 10cm clearance between the wall and equipment.

- Please do not install the product in embedded facility unless there is good ventilated
device.

- Please place this product on flat ground to prevent from fal li ng and damaging.

- Operate your device only from the type of power source indicated on the marking label.
This device only works for AC 100-240V.

- Do not overload power outlets and extension cords because this can result in a risk of
fire or electric shock.

- Unplug this device from the power outlet and ask qualified technician under the
following conditions:

• The power cord is da ma ged or abr asion.

• Fall from high place or case damage.

• Stuff or liquid fall into the machine.

• Unusual sound, smell etc.

•Abnormal phenomenon during using. Machine fails to work after oper ating by instruction.

- Replacement parts

When replacement parts are required, make sure that the replacement parts specified by

the manufacturer that hav e t he same characteristics with previous on e.

- Transit

When a cart is used for product transit, please pay attention to protect the screen panel.
Avoid damage fro m fal ling down caused by over-brake and over-force.

4

- Cleaning

Unplug your machine before cleaning. Do not use liquid or chemical cleaner s. A damp
cloth is suggested to clean the exterior of your machine. The screen panel must be
cleaned with soft wet cloth and alcohol, solvents, or ammonia liquid is banned.

- Environment

The screen image quality may become poor when the device is removed from low to high
temperature environment or screen face to the air-conditioner. Be sure to make the fog
evaporated before using.

Charter2: Ports and Buttons

Pic.1: Front ports and buttons

5

Pic.2: Side and bottom ports

HDMI: Connect external PC with IQTouch by HDMI cable

USB3.0/USB2.0/TV-USB: USB interfaces to connect USB keyboard/U disk/Mobile HD

Touch USB: For external PC connection to realize touch function

EARPHONE: Earphone/audio device connection

YPbPr IN: For external video devices, STB/DVD, etc.

AV IN 1/2: For external video devices, STB/DVD, etc.

AV OUT: The monitor signal output of TV set can be used as signal source

SPDIF: Audio device connection

RS232: External devices with RS232 connection:

VGA IN: Connect external PC with IQTouch by VGA cable

VGA OUT: IQTouch signal output through VGA to realize dual screen display of IQTouch and

external device.

AUDIO IN: Audio output of PC

LAN: connect the WAN/LAN

SD CARD: Expand TV storage with TF card

RF IN: Radio-frequency signal input to connect TV

6

Charter3: Remote Control

Pic.3: Remote control

Note: The functions on the Remote
Control are different by model.

NO Button Function

1.

Power on/off

2.

Mute

3. 0~9 Input digit/”space” in OPS mode

4. Al t +Tab Change window in OPS mode

5. Alt +F4 Close window in OPS mode

6. PgUp/PgDn Next/previous page in ops mode

7.

Reset

Restore system

8.

Start menu in OPS mode

9.

Right button in OPS mode

10.

Up/down/left/right button

11.

Active touch TV application in ops mode

12. Esc/Exit Stop current operation or exit menu

13. VOL+/VOL- Control sound volume

14. CH+/CH- Select different input source

15. Input Select different input source

16. Menu Open/close menu

17.

Open/close backlight

18.

PC

OPS computer shortcut

19.

VGA

VGA mode shortcut

20.

HDMI

HDMI mode shortcut

21.

MEDIA

Multi-media mode shortcut

22.

Sleep

Sleep timing shutdown

23.

Display

Show program info.

24.

P.Mode

Select picture mode

25.

S.Mode

Select sound mode

26.

F1/

Sleep timing shutdown

27.

F2/

Select sound mode

28.

F4

Correspond to computer buttons F1-F12

29.

F5/

30.

F6/

31.

F7/

32.

F8

33.

F9

34.

F10

35.

F11

36.

F12

*

:Only part of device support this feature

7

Charter4: Communication Protocols Basic Operation

RS_232 Communication Protocol

Baud Rate: 115200 Data Length: 8 bit
Communication Code: ASCII Stop Bit: 1 bit Use a straig ht -through cable

Function

Communication Protocols

Function

Communication Protocols

POWER 99 A2 01 01 27 AA Right 99 23 25 01 DA AA

SOURCE 99 23 13 01 EC AA OK 99 23 26 01 D9 AA

TV 99 23 07 01 F8 AA Menu 99 23 12 01 ED AA

AV 99 23 08 01 F5 AA Home 99 23 00 01 FF AA

YPBPR

99 23 OA 01 f5 AA

Mute

99 23 02 01 FD AA

VGA

99 23 OB 01 F4 AA

VOL+

99 23 17 01 E8 AA

HDMI

99 23 OE 01 F1 AA

VOL-

99 23 17 01 E7 AA

UP

99 23 22 01 DD AA

ECO

99 23 16 01 E9 AA

DOWN

99 23 23 01 DC AA

PC

99 23 11 01 EE AA

LEFT

99 23 24 01 DB AA

Multi-Media

99 23 27 01 D8 AA

Basic Operation:

1) Power on/off
Connect the power plug to power outlet. Hold the “power” button on the device or the
Remote Control to power on. Hold the “power” button aga in to power off the device.
2）The image and audio setting w i ll b e saved when the device is shut down.

Charter5: Product Installation and Testing

5.1 Connect Device with external PC

1. Minimum Confi guration Requireme nt of External PC

*With 2.1GHZ CPU above (recommend: Intel core2 duo above PC/notebook)
*1G DDR1 RAM above (recommend: 2G DDR2 above)
*128G HDD
*USB/VGA/HDMI ports
*Window7/Window8/Window10

2. Installation and connection

1) Connect IQTouch to AC100~2 40V via power cord.

2) Connect VGA & Audio cable or HDMI to IQTouch

8

Pic. 4: connect IQ touch to external computer

3) Connect Touch USB Cable

①Connect A type of USB cable to the USB port of computer.
②Connect B type of USB cable to the touch USB por t of IQTouch

Touch USB Cable

Pic. 5: Touch USB Connection

4) Connect external co mp ut er t o Device
①Connect the computer HDMI/VGA port to device corresponding ports via HDMI/VGA
cable.

②Connect computer USB por t t o I QTouch USB port via USB cable.
③Plug-in the power cord and start the IQTouch
④Press Input button on the front panel, pull up from the bottom of the screen to show the

pull-up Menu or remote cont r ol can select signal source (external comput er ) .

9

5.2 Connect Device to built-in OPS

1. Detachable OPS mod ul e configuration

*CPU: Intel i3/i5/i7
*Chipset: Intel
*RAM: 2G/4G DDR3; Mainboard supports up to 8G DDR3
*HHD: 2.5inch 320G/500 G / 1TB
*Graphics: integrated graphics /discrete graphics
*Resolution: 1920*1080/3840*2160
*System: Windows7/Windows8/ Windows10
*Interface: 2*USB3.0 /4*USB2.0/1*RJ45LAN port/1*HDMI output/1*VGA output/1*Audio
output 1*Mic input/1*RS2 32

2. Installation and Connection

1) Connect IQTouch to AC100~2 40V via attached power wire.

2) Built-in OPS Audio & Video/touch cables have already connected inside the device.

Pic.6: IQTouch connected with OPS

3) Plug in the power cable and start the IQTouch

4) Press Input button on the front panel, pull up from the bottom of th e sc r een to show the
pull-up Menu or remote control can select signal source (OPS).

10

Charter 6: Menu Functions

Press “Menu” button on the device or Remote Control, the main menu will occur on the
screen, select the desire settings by “Up/Down” button on the Remote Control or
“CH-/CH+” button on the device. Press “Menu” button to exit main menu when the main
menu display on screen
The System Settings include General/Image/Sound/Channel/Network/Intelligent/System/
About.

1.General setting

2. Picture setting

11

3. Sound setting

4. Channel Setting:

This function is only support ed by TV input signals.

5. Network Setting:

12

6. Intelligence setting;

7. System setting:

13

8. About setting

14

Charter7: Pull-up Menu

Pull up from the bottom of screen to show the pull-up menu.

Back: Back to the main interface
Home: Enter the Andriod system.
Task: Enter the tas k interface to display all the tasks you open
Input: Display t he input source interface
Menu: Display the system settings interface
VOL-/VOL+: Ajust the device sound
Bright-/Bright+: Adjust the device brightn ess
Wpanel: Enter the w hiteboard function
Scomme: start the annotation
Scshot:Capture the scr een
User:Define by user

Charter8: Android Interface

Turn on IQTouch to enter Android interface.
Picture-in-Picture displays windows system.Home icon on the Menu bar that can be
pulled up from the bottom of the screen. Menu key on the remote control can open
Android interface when us ing other signal sources.

15

1. MediaClass

Multimedia software Including office software, pictures, song, video and local disk
equipment, network SAMBA equipment .

2. Whiteboard

Whiteboard can be used for t eaching, such as writing and drawing

3. Teaching resource

After connecting to the Internet, click the icon to ope n the favorite t eaching resour ce link in
the browser.

4. Browser

Work with internet

16

5. All App

This menu includes system Settings, camera, clock, browser, calculator, timer, download,
one click projection and Microsoft office software, click icon t o execute each application

6. Electronic instruction

The pull-up menu is provided with electronic instruction for easy access.

7.Home setting

The home Setting menu provides download application management, network Setting
and general Setting.

Settings

Network Setting General Setting

17

Charter9: Built-in OPS /External Computer Interactive

Function

IQTouch Built-in OPS, which can perform touch operation of various applications on the
screen. It can also connect the external computer through VGA or HDMI to achieve the
display and touch control of external computer contents.

18

Charter10: Troubleshooting

Note: Before seeking repair service, please check the following items to confirm if the

issues can be solved.

Issues

Check items

No sound and image 1. AC 220V power supply

2. Signal cable connection

3. Power on the Touch TV and

external device

4. Stand-by mode

Image only, without sound

1. Adjust the volume

2. Mute

3. External audio cable

connection

No Image or black-white image 1. Adjust color setting

2.Ajust color mode

Image fuzzy (TV) 1. TV signal issue

2. TV station issue

Image and Audio with interference

1. Try to far away from the

Interference source

2. Change socket

Remote Control failure 1. Remote Control wrong

direction

2. Battery wrong polarity

3. Remote Control signal

occlusion

Touch function disabled

1. Make sure no other objects

touch at the same time

2. Check no other object on the

touch frame

Touch position is not correct

1. Try the calibration of windows

2. Check the test signal of IR

touch frame

19