iProSecu iDC-453 User Manual

1/44

User Manual

CMOS 2.0 Mega Pixel

IP Vandal Dome Camera

2/44

WARINGS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION：TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED

TO THEIR RESPECTIVE COMPANIES.

3/44

Content

I. PREFACE ....................................................................................................................................... 4

II. PRODUCT SPECIFICATIONS ....................................................................................................... 4

III. PRODUCT INSTALLATION ........................................................................................................... 7

A. M

ONITOR SETTING

..................................................................................................................................... 7

B. H

ARDWARE INSTALLATION AND

I/O P

IN ASSIGNMENT

............................................................................... 8

C. IP A

SSIGNMENT

....................................................................................................................................... 13

D. I

NSTALL ACTIVEX CONTROL

: ................................................................................................................... 15

IV. LIVE VIDEO .................................................................................................................................. 17

V. CONFIGURATION ........................................................................................................................ 20

A. S

YSTEM

.................................................................................................................

錯誤

錯誤錯誤

錯誤

尚未定義書籤

尚未定義書籤尚未定義書籤

尚未定義書籤。。。。

B. N

ETWORK

................................................................................................................................................ 24

C. A/V S

ETTING

........................................................................................................................................... 28

D. E

VENT LIST

.............................................................................................................................................. 34

VI. NETWORK CONFIGURATION .................................................................................................... 41

VII. FACTORY DEFAULT.................................................................................................................... 43

VIII. PACKAGE CONTENTS ............................................................................................................... 44

APPENDIX I .......................................................................................................................................... 44

V1.1_111114

4/44

I. Preface

3-AXIS IP Vandal Dome is a professional CMOS Mega Pixel IP Vandal Dome. It

has built-in web server which enables user to view real-time video via IE browser.

It also supports simultaneously H.264/JPEG/ MPEG4 (3GPP Only) video

compression with CMOS M-Pixel Sensor which provides smooth and high video

quality. The video can be stored in the SD card, and can be playback remotely.

3-AXIS IP Vandal Dome is an easy-to-use IP Camera which is designed for

security application.

II. Product Specifications

 IP66

 2M CMOS Sensor

 Power over Ethernet available

 IR LED Built-in 12M

 Vandal-proof 400 Pounds

 H.264/ JPEG/ MPEG4 (3GPP only) compression

 SD card backup

 2-way audio

 Support Cell Phone/PDA/3GPP

 3 Streaming

 SDK for Software Integration

 Free Bundle 36 ch recording software

Specifications

Hardware

CPU ARM 9,32 bit RISC

DDR2 256MB

Flash 16M

Image sensor 1/3” CMOS (2M-Pixel)

Lens Type Vari-focal 2.7~9mm Mega Pixel Lens

ICR

Mechanism IR Cut Filter(optional)

5/44

LED Built-in 18 IR LED (optional)

IR Distance-12M (Optional)

I/O 1i

n/1 relay out

Video Out 1 Vp-p, 75 Ohms

MIC in 1

Audio Out 1

Power Over Ethernet Yes

Power Consumption DC 12V, 560mA

3-Axis Gimbal

Adjustments Angle

Pan: 175∘ Tilt 75∘ Rotation 180∘

Dimensions 126mm (W) x 126mm (L) x 100mm (D)

Network

Ethernet 10/ 100 Base-T

Network Protocol HTTP, TCP/ IP, UDP, SMTP, FTP, PPPoE,

DHCP, DDNS, NTP

System

Video Resolution 1600x1200,1280x1024, 1280x960, 1280x720,

800x600, 640x480, 320x240, 160x120

CMOS setting Night Mode, Brightness, Contrast, BLC,

Sharpness

Triple Streaming Yes

Image snapshot Yes

Full screen monitoring Yes

Privacy Mask Yes, 3 different areas

Compression format H.264/ JPEG/ MPEG4 (3GPP only)

Video bitrate adjust CBR, VBR

Motion Detection Yes, 3 different areas

Triggered action Mail, FTP, Save to SD card, Relay

Pre/ Post alarm Yes, configurable

Security Password protection

Firmware upgrade HTTP mode, can be upgraded remotely

Simultaneous

connection

Up to 10

Audio Yes, 2-way(Duplex Support)

SD card management

6/44

Recording trigger Motion Detection, IP check, Network Status (wire

Connection only), schedule, alarm

Video format AVI, JPEG

Video playback Yes

Delete files Yes

Web browsing requirement

OS Windows 2000, XP, 2003, Microsoft IE 6.0 or

above

Hardware Suggested

Intel Dual Core 1.66G,RAM: 1024MB, Graphic

card: 128MB

Minimum Intel-C 2.8G, RAM: 512MB, Graphic card: 64MB

7/44

III. Product Installation

A. Monitor Setting

i. Right-Click on the desktop. Select “ Properties”

ii. Change color quality to highest (32bit).

8/44

B. Hardware Installation and I/O Pin

Assignment

i. Connect a power adapter and IP Camera to PC or local network

ii. 3-Axis Gimbal Adjustments

Once the users open the case, the gimbal adjustment offers the

○

2 Tilt: 30°~90°

○

1 Pan: 172°

○

3 Rotation: 180°

9/44

convenience method to install on the wall. The pan, tilt, and rotation are

provided in this model. The users can adjust the gimbal with Pan 172

degree, tilt 30~90 degree, and rotation 180 degree respectively.

iii. I/O Control Instruction

I/O terminal connector – used in application, for e.g., motion detection, event

triggering, alarm notifications. It provides the interface to:

1 Digital Input (GND+Alarm) – An alarm input for connecting devices that can

toggle between an open and closed circuit, for example: PIRs, door/window

contacts, glass break detectors, etc. When a signal is received the state changes

and the input becomes active.

Relay output (COM +N.O.) / (COM+N.C.) – An output to Relay switch, for

example: LEDs, Sirens, etc

iv. Digital Input

Alarm Input

1. GND (Ground) : Initial state is LOW

2. Alarm : Max. 50mA, DC 3.3V

Relay Output

1. N.C. (Normally Close): Max. 1A, 24VDC or 0.5A, 125VAC

2. COM: (Common)

3. N.O. (Normally Open): Max. 1A, 24VDC or 0.5A, 125VAC

ALARM IN

RELAY OUT

10/44

v. Relay

1. Digital Input connection

2. Relay Output Connection

Door/Window

Contacts

11/44

12/44

v. PoE ( Power Over Ethernet)(Optional)

802.3af, 15.4W PoE Switch is

recommended

Power over Ethernet (PoE) is a technology that integrates power into a

standard LAN infrastructure. It enables power to be provided to the

network device, such as an IP phone or a network camera, using the

same cable as that used for network connection. It eliminates the need

for power outlets at the camera locations and enables easier application

of uninterruptible power supplies (UPS) to ensure 24 hours a day, 7 days

a week operation.

Ethernet

PoE Switch

PoE IP Camera

Ethernet Cable

13/44

C. IP Assignment

i. Use the software, “IP Installer” to assign the IP address of IP CAMERA.

The software is in the attached software CD.

ii. IP installer supports two languages

a. IPInstallerCht.exe：Chinese version b. IPInstallerEng.exe：English version

iii. There are 3 kinds of IP configuration.

a. Fixed IP (Public IP or Virtual IP)

b. DHCP (Dynamic IP)

c. Dial-up (PPPoE)

iv. Execute IP Installer

v. For Windows XP SP2 user, it may popup the following message box.

Please click “Unblock”.

vi. IP Installer configuration:

vii. IP Installer will search all IP Cameras connected on Lan. The user can

click “Search Device” to search again.

14/44

viii. Click one of the IP Camera listed on the left side. The network

configuration of this IP camera will show on the right side. You may change the “name” of the IP Camera to your preference (eg: Office, warehouse). Change the parameter and click “Submit” then click “OK”. It will apply the change and reboot the Device.

ix. Please make sure the subnet of PC IP address and IP CAM IP address

are the same.

The same Subnet:

IP CAM IP address: 192.168.1.200

PC IP address: 192.168.1.100

Different Subnets:

IP CAM IP address: 192.168.2.200

PC IP address: 192.168.1.100

To Change PC IP address:

Control PanelNetwork ConnectionsLocal Area Connection PropertiesInternet Protocol (TCP/IP) Properties

Please make sure your IP Camera and PC have the same Subnet. If not, please change IP Camera subnet or PC IP subnet accordingly.

x. A quick way to access remote monitoring is to left-click the mouse twice

on a selected IP Camera listed on “Device list” of IP Installer. An IE

browser will be opened.

+ 30 hidden pages

iProSecu iDC-453 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual