IP Power 9258T, 9258S User Manual

IP POWER 9258 USER MANUAL

IP POWER 9258

USER MANUAL

IP POWER 9258 USER MANUAL

USER MANUAL

IP POWER 9258T / 9258S

Version: V1.50

2008.05

- 1 -

VER. 1.50

IP POWER 9258 USER MANUAL

Warning:

Any changes to this equipment without permission may cause damages to your equi pment! This
equipment has been proved by CE & FCC to can be prevented from the influence of harmful
electronic jamming in normal business use condition.

IMPORTANT NOTICE

1. We have no responsibility for the possible damage caused by improper usage or
abnormal working environment.

2. Do not use IP POWER in strong shaking condition.

3. Please contact the dealer If IP POWER works improperly.

Copyright © 2005 All rights reserved. No part of this publication may be reproduced, stored
in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written consent of us

All other products mentioned in this document are trademarks of their respective

manufactures.

We are exempt from notify any change of our products.

- 2 -

IP POWER 9258 USER MANUAL

Table of Content

1. INTRODUCTION...........................................................................................................4

FEATURES..........................................................................................................................

9258

FUNCTION DESCRIBE.................................................................................................

2.SPECIFICATION............................................................................................................5

PACKAGE CONTENTS .........................................................................................................

MINIMUM SYSTEM REQUIREMENTS.....................................................................................

3.INTERFACE DESCRIPTION........................................................................................6

4.HARDWARE & SOFTWARE INSTALLATION...........................................................7

HARDWARE INSTALLATION ..................................................................................................

SOFTWARE INSTALLATION...................................................................................................

5. INITIAL SETTING.........................................................................................................8

INITIAL SETTING THROUGH ETHERNET.................................................................................

SETTING OF SOFTWARE SHUT DOWN CONTROLLED PC/ SERVER…………………….

6. HARDWARE CONTROL & SETTING……………………………………………….12

7. CONTROL AND SETTING THROUTH THE INTERNET EXPLORE.................... 13

LOGIN.................................................................................................................................

CONTROL THE POWER SUPPLY OF OUTLETS………………………………………………..
POWER SUPPLY STATE QUERY……………………………………………………………...

SYSTEM SETTING............................................................................................................…

SETTING THE PASSWORD…………………………………………………………….……
SETTING THE IP ADDRESS.…………………………………………………………………
EMAIL SETTINGS……………………………………………………………………….. …
SETTING THE TIME SCHEDULE……………………………………………………………..
SETUP UP OWN OUTLET DEFAULT STATUS ………………….……………………………

. Internal Clock Settings & Network Time Protocol (NTP)………..……………………..

. WAKE ON LAN………………………………………………………………………………

. FIRMWARE UPDATE: …………………………………………………………………….

8. DDNS SETTING ……………………………………….………………….……………22

9. CHECK STATUS THROUGH SNMP ……………….………………….……………23

10. CONTROL AND SETTINGS THROUGH HTTP ORDER………………………….24

ORDER FORMAT……………………………………………………….…………………….

11. FAQ ……………………………………………………………….…………………….26

12. Webpage Customization ….………………………………….…………………….26

- 3 -

VER. 1.50

IP POWER 9258 USER MANUAL

1. Introduction

IP POWER 9258 is a web controller which can be easily used in the industry field. With the
remote network control technology, user can control or query the power supply of equipment.
User can do this in any computer connected to the internet or local area network, there is no
special program needed, also there is no need to open the external case of the computer.
Try to imagine that while traveling in a foreign country, you can control the power supply of your
electric equipments, such as a computer, a server, a router, an entrance guard or security /
surveillance system directly or use a time schedule comes with the IP POWER 9258. You can
remotely control the power switch with any computer conne cted to the network, which is not only
convenient, but it also big saving on the manpower and time.

Feature

1.

Built in web server, can be used through the Ethernet or Internet network.

kinds of real time state of 9258.

er at

t to those status setting.

and hyperlinks to

develop and application.

6. Safety shut down controlled PC/ Server ( WINDOWS OS )

are each outlet ON /OFF

2. Support multiple browser, such as Internet Explore, Netscape, you can operate the switch

and check the state without any special program.

3. Control 4set AC: outlet equipment at the same time.

* 9258T - Outlet NEMA5-15P / 9258S - Outlet IEC320-C13.

AN - virtual IP 4. Supported HTTP, DDNS , SMTP, SNMP, INTERNET- fixed IP, DHCP, L

5. Security passwords identify. Easily installed and can be updated online.

6. Supported RS232 port communication, indicate all

7. Separated LED indicates the state of each switch.

8. Develop tool (SNMP) is provided. It can be modified to meet the user’s special need.

9. Safely designed for high voltage resista nce and protecti on for leakage of ele ctrical currency,

using nonflammable material

10. Network Server reboot -- can remote control to reboot the powe r on for the PC or Serv

remote site ,

11. Timer Schedule -- can pre-set the time schedule to turn power on / off thru Internet /

Ethernet.

12. Support NTP (Network Time Protocol) - synchronize the time of 9258 to the Internet web

address time.

Setup up own outlet default: when regain p13. ower it store each outle

phics14. Arrange own webpage design : Change the user-defined gra

DK customize the web pages by webpage S

5. Provide SDK (VB & VC) for own Software1

1

17. Local Hardw

Specification

* Maximum rated voltage for each 4 outlet: 250V AC, 24V DC

h 4 outlet: (Total) 15A AC/DC,
* Maximum rated currency: (Individual outlet) 6A AC/DC
* Action delay: Max 10ms
* Working temperature: 0~ 70°C

* Maximum rated currency for eac

- 4 -

IP POWER 9258 USER MANUAL

1.50

- 5 -

2. Specification

Package contents

* 9258S - For EU / AU / UK

* 9258T – For USA / TW / JP

Option; RJ45 (Cat5) net wire
Option : Power Cable ( Choose one)

Minimum System Requirements

 Intel Pentium III 300MHz or above/compatible AMD CPU

 WINDOWS operating system (IE5.0+SPI) & LINUX

 Minimum 64MB RAM
 VGA Card: supported direct draw

 Network card with RJ45 port & Ethernet HUB or Switcher
 Internet network (Ethernet, ADSL or other ways, depends on whether you need far end

control ability or not)

NOTICES:

1. IP Power 9258S: for 220-250V, please use power (IN) wire at 10A current.

Max output current: (total) 10A. Max (individual) 6A.

2. IP Power 9258T: for 100-120V, please use power (IN) wire at 15A current.

Max output current: (total) 15A. Max (individual) 6A.

VER.

IP POWER 9258 USER MANUAL

3. Interface Description

IP Power 9258
Front interface shown below:

From left to the right

1. RESET: self-protect AC reset button. IP Power 9258 can cut off the power supply of outlets
automatically if there is a shortcut or current overload. After user having solved the problem,
push the reset button, the AC power supply will become normal.

2. LED: 4 LED indicator lights. If the LED is on, means the corresponding outlet is power on.

3. RS232 port: provide the power output state and get IP address to re-update if update fails

4. Output: To connect with daughter device - IP Power 9258 Outlet

5. Circle sign

and On & Off: Hardware power ON /OFF set up. Please do o refe r page

11 for proper operation.

6. RJ45 Ethernet port: link to the net wire.

Rear interface shown below:
9258S:

9258T:

Port description (from left to the right)

1. 90-240VAC power input port

2. Power switch: the power switch ON /OFF of IP Power 9258.

3. OUT 1- 4: 4 individually switched AC outlets

- 6 -

IP POWER 9258 USER MANUAL

1.50

- 7 -

4. Hardware & Software installation

Before you star to use IP Power 9258, please follow the steps below

 Check the package to make sure the contents is complete.
 Prepare one Ethernet HUB or Router
 Check the voltage of the power supply to make sure it is AC 110-240 volt
 Please confirm the specification of your power cable.

 IP Power 9258S: for 220-250V, please use the 10A power cable.
 IP Power 9258T: for 100-120V, please use the 15A power cable.

Hardware installation

1 Connect the 9258 to HUB through network wire.
2 Connect the HUB or Router to the internet (either through DSL or Cable modem).
3 Connect the power adapter to the 9258.
4 Connect the power adapters of under control electric equipment to corresponding

out port of 9258.

Turn on your computer and the power adapter of IP Power 9258
＊
For 220-250V, please use power wire can support 10A current.

Max. Output current: (total) 10A, (individual) 6A.

Max. Output current: (total) 15A, (individual) 6A

Software installation

Please follow the steps below to install the software.

6. Insert the Installation CD in the package and windows will auto-run. If not please bro wse
for the Autorun.html file in CD.

.

7. Click IPEdit in the downloads section of the installation CD

VER.

IP POWER 9258 USER MANUAL

8. Save IPEdit to your desktop or any other place of your choosing

9. After you have saved it onto your desktop it is ready to be used.

5. Initial Settings

Initial setting through the Ethernet

Open “IPEdit.exe”. Make sure that the IP Power 9258
is properly turned on and there is an ethernet connection
connected by a RJ45 cable.

In the local devices section of IPEdit all products under the same subnet network will appear.
Please refer to (Figure 1.1) below:

(Figure 1.1 IPEDIT)

.

- 8 -

IP POWER 9258 USER MANUAL

(Figure 1.2 IPEdit)

IPEDIT will search and display all IP Products 9XXX series under the same local Ethernet. The
default name for the IP Power 9258 is “IP9258” Please refer to (Fig. 1.2 above).

1. Double click and highlight your IP Power 9258 device. The default device name and
IP/Network settings will all be displayed on the right hand side of IPEdit.

Make sure that the IP Address of your 9258 is setup on the same subnet network as your
PC’s (Subnet mask, Gateway)

* Represents that your 9258 does not match the gateway of your router.

(E.g. If the Default Gateway of your computer is 192.168.1.1 The IP Address of your 9258 will
need to be set up to 192.168.1.XXX.)

2a. Automatically Detect Network settings (Please go to 2b. for steps on how to manually
enter network settings)

a.) Click on the REF button to the right of IPEdit
b.) Please wait a few seconds while IPEdit detects your network settings. Then click the Apply

button to apply the new network settings

- 9 -

VER. 1.50