ipLDK LDP7008, LDP16, LDP24D User Manual

LDP7008/16/24D Digital Telephone

User Guide

Servicing and Safety Precautions

• Do not drop or subject the phone to physical shock

• Do not immerse in water

• Do not disassemble or attempt to modify the phone in any way

• Use a damp or anti-static cloth to clean the phone. Do not use a dry or
electrostatically charged cloth. Do not use chemical or abrasive cleaners as these
could damage the phone.

• Retain the cardboard packaging supplied with this handset. It should be used if the
phone has to be returned for service. The packaging can be recycled when no longer
required.

• Please take care not to place the phone in direct sunlight for prolonged periods.

Service

The 7008/16/24D digital telephone contains no user-serviceable parts. LG
recommend that your 7008/16/24D digital telephone is serviced or repaired by an LG
authorised service centre

7008/16/24D User Guide | Emergency Services and Safet y Precautions 01

Preset Messages

7008/16/24D User Gui de | Preset Messages 14

Preset Messages

Preset messages that can be left in the display of your handset are as follows:

00 PERSONAL/CUSTOMISABLE Message.
01 LUNCH, RTN HH:MM – Use this message if you are away from your desk at lunch. The
internal calling party will see this message on their display when the call you.
02 ON VACATION/RTN DATE (MM:DD) – This message will inform internal callers that your
are on holiday and your expected return date.
03 OUT OF OFFICE/RTN TIME (HH:DD) – If you are out of the office for a period of the day
internal callers can see your expected return time.
04 OUT OF OFFICE/RTN DATE (MM:DD) – As per message 03 but you should use this if
you are away from the office for a day or more.
05 OUT OF OFFICE/RTN UNKNOWN – This message should really be used in emergencies
where you have been called away from the office unexpectedly.
06 CALL: XX…..(17 DIGITS) – If you are away from your desk/office and cannot take calls
this is a way of informing internal callers that they should ring an alternative number.
07 IN OFFICE/STA XXXX – You may have to work at another colleagues station. This informs
internal callers where to redirect their call to.
08 IN A MEETING/RTN TIME (HH:MM) – If you are not contactable in a meeting you should
use this message.
09 AT HOME – If you are to be working from home for a day leave this message on you
phone before leaving the office.
10 AT BRANCH OFFICE

11-20 – These options are available to be custom set to your organisation’s requirements.

User Programming Codes

7008/16/24D User Guide | User Programming Codes 13

User Programming Codes

Flexible buttons can be assigned as the one of the popular features below. To programme a
button as the code the sequence is:

[TRANS/PGM] + [FLEX BUTTON] + Programme Number + [HOLD/SAVE]

Differential Ring………………………...11
Enblock Mode………………………..…14
SMS Notice/Display……………………15
Headset Port On/Off……………………17
ICM Ring Tone………………………….18
CO Ring Tone…………………………19
COS Down………………………………21
Walking COS……………………………23
Authorisati on Code Register…………31
Authorisation Code Change…………...32
Set Wakeup Time………………………41
Conference Room Activate……………43
Conference Room Deactivate………...44
Preset Message Activation……………51
Set Custom Message………………….52
Record User Greeting………………….61
Play Date and Time…………………….62
Play Station Number…………………63

Listen to Station Status…………………64
Record Paging Message……………….65
Erase User Greeting……………………66
Erase Paging Message…………………67
LCD Language Change………………71
BGM (Background Music)……………73
Station Name Register………………….74
Headset Setup…………………………..75
Headset/Telephone Ring Mode………76
Account Code……………………………80
DDI Call Wait Activate…………………81
Intercom (ICM) Hold…………………….83
Camp On…………………………………85
UCD (Call Centre) DND………………87
Conference………………………………91
DND………………………………………93
Flash……………………………………...94
Mute………………………………………95
Redial…………………………………….97

Getting to know your 7008/16/24D

7008/16/24D User Guide | Getting to know your 7008/16/24D Digital Telephone 02

Your digital telephone’s keys

(1) Speaker

This button is for activating the phone’s speaker whilst on hook. Useful when using a headset
or if you wish to speak hands free. Red LED illuminated if off-hook without lifting the receiver.

(2) Hold/Save Key

Dual purpose key. When in a call it is used to place a caller on hold. When programming it is
for permanently updating changes to the system memory.

(3) Volume (+ / -) Key

Used for adjusting speaker, ringing and in-call volume

.

(4) Speed Key

This key is used to access System and Personal speed dial numbers and the internal
directory.

(5) Trans/Pgm Key

Dual purpose key. When in a call with an external party it is used to transfer. When
programming features, speed dial numbers it is a programme key.

(6) Flexible Keys

These keys are for use as line keys or for storing regularly used features or speed dials.

(7) Silver Navigation Button (16 & 24D Only)

This button is for quick, easy access to your phonebook and menu tree. The OK button is for
confirmation of programming changes and menu commands.

(8) Context keys (3 silver keys under LCD display – 16D & 24D only)
Depending upon the active state of your phone, these keys will relate to different on-screen
prompts.