W63AP
W64AP
AC1200 Wave 2 Gigabit Access Point
AC1350 Wave2 Gigabit Access Point
www.ip-com.com.cn
www.ip-com.com.cn
W64AP
AC1350 Wave2 Gigabit Access Point
Product Introduction
Compliant with IEEE 802.11ac, W64AP is a
www.ip-com.com.cn
gigabit dual-band ceiling access point.
Powered by MU-MIMO technology, a single
W64AP can simultaneously communicate
with multiple clients, greatly improving
throughput and enhancing user experience.
With high power RF and renovative design
of antennas that are optimized for long
distance scenarios, W64AP offers reliable
long-distance wireless solutions for indoor
space with signal barriers, such as factory
warehouses and hotels.
01
W64AP AC1350 Wave2 Gigabit Access Point
Key Features
Product Features
www.ip-com.com.cn
High power for broader and stable coverage.
Gigabit internet connection for ultra-fast experience.
Up to 1317 Mbps dual-band data rate.
Centralized management by all IP-COM ACs and enterprise routers.
High power
High power RF and built-in high-gain omni-directional antennas guarantee a
broader and stable coverage.
IEEE 802.11ac Wave2
Powered by MU-MIMO technology, a single W64AP can communicate with multiple
wireless clients at one time, letting you enjoy higher throughput and better
experience.
Dual-band for more connected clients
W64AP allows clients that support either 2.4 GHz or 5 GHz band, or both to
connect to it at the same time, tripling the quantity of connected clients of traditional
single-band AP.
02
Gigabit internet connection for ultra-fast experience
Up to 1317 Mbps dual-band data rate and the Gigabit Ethernet port offer you
ultra-fast internet connections.
W64AP AC1350 Wave2 Gigabit Access Point
Product Features
www.ip-com.com.cn
Built-in RF for intelligent optimization
Featuring various anti-interference algorithms, the built-in RF enables W64AP to
evenly allocate bandwidth resources for multiple users, filter interference, and
optimize date rate, offering you a guaranteed signal strength and reliable wireless
experience.
VLAN tagging for SSID
W63AP allows you to set multiple SSIDs, and the IEEE 802.11q VLAN-compliant
feature enables you to add VLAN tags for SSIDs, thus protecting the security of your
network.
Standard PoE sourcing and DC power supply for easy
deployment
You can use an IEEE 802.3at-compliant PoE sourcing equipment, or a 12V DC
power adapter to power on W64AP.
Centralized management
You are allowed to configure and manage multiple W64AP in a centralized manner
through all IP-COM access controllers (AC) and enterprise routers that include AC
functionality, and enjoy simple management, configuration and monitoring of all
access points.
03
W64AP AC1350 Wave2 Gigabit Access Point
Application Scenarios
IMS Network
Management System
Cloud Management
Network
www.ip-com.com.cn
Multi-Service
Enterprise Router
AP Controller
Mobile APP
Ceiling AP: W64AP
In-Wall AP
Outdoor AP
Core Switch
PoE Switch
PoE Switch
04
IP Camera
W64AP AC1350 Wave2 Gigabit Access Point
www.ip-com.com.cn
Packaging
Product Information
Model W64AP
Appearance Ceiling
Dimensions 178mm* 178mm* 38 mm
Hardware Specifications
Frequency band 2.400 -2.4835 GHz, 5.150 - 5.250 GHz
Wireless standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
2.4 GHz data rate 1 - 450 Mbps
5 GHz data rate 6 - 867 Mbps
Ethernet port 1*10/100/1000 Base-TX RJ45 port
Button 1*Reset
LED indicator 1*Power
Max. power consumption Full-load 13.5W
Power supply standard IEEE 802.3at PoE, DC 12V 1.5A
Software Specification
Operating modes AP, Client+AP
Hide SSID Supported
Max. No. of SSID 2.4 GHz: 8; 5 GHz: 4
Max. connected clients 2.4 GHz: 128; 5 GHz: 256
WEP Supported
WPA-PSK AES/TKIP
WPA2-PSK AES/TKIP
WPA Supported
WPA2 Supported
Access control MAC address-based
Adjustable power transmit Supported
Frequency analysis Supported
AP isolation Supported
Connected clients control Supported
RSSI threshold Supported
05
W64AP AC1350 Wave2 Gigabit Access Point
Packaging
WMM Supported
VLAN tagging for SSID Supported
Antenna gain 4 dBi
2.4 GHz Max. output power 23 +/- 1.5 dBm
5 GHz Max. output power 23 +/-1.5 dBm
802.11b RX sensitivity -94 dBm
2.4 GHz 802.11n (MCS7) RX sensitivity -75 dBm
5 GHz 802.11a RX sensitivity -98 dBm
5 GHz 802.11n (MCS7) RX sensitivity -79 dBm
Prefer 5 GHz Supported
LED indicator control Supported
www.ip-com.com.cn
Diagnostics tool Ping, Traceroute
Scheduled reboot Supported
Reboot at specified interval Supported
Management Web UI
System logs Supported
Firmware upgrade Local and AC upgrade
Reboot Local and AC reboot
Reset Local and AC reset
Backup configuration Supported
Restore configuration Supported
Operating Environment
Default login IP address 192.168.0.254
Default user name admin
Default password admin
Operating temperature -10℃ - 45℃
Operating humidity (10%-90%) RH, non-condensing
Storage temperature -30℃ - 70℃
Storage humidity (10%-90%) RH, non-condensing
Packaging
Certificates CE\FCC\RoHS
06
W64AP AC1350 Wave2 Gigabit Access Point
www.ip-com.com.cn
IP-COM NETWORKS CO., LTD.
Tower E3, No.1001, Zhongshanyuan Road,
Nanshan District, Shenzhen, China. 518052
Service: info@ip-com.com.cn
Inquiry: marketing@ip-com.com.cn
Tel: +86-755-27653089
Specications are subject to change without notice.Copyright ©2020 IP-COM Networks Co., Ltd. All Rights Reserved. IP-COM is the trademark of IP-COM Networks Co., Ltd. All other brand names
mentioned herein are the trademark or registered trademarks of their respective holders.
Loading...