Page 1
Pro-6-LR
802.11AX Dual-Band Long Range Access Point
www.ip-com.com.cn
Page 2
www.ip-com.com.cn
Pro-6-LR
802.11AX Dual-Band Long Range Access Point
Products Description
Pro-6-LR is designed based on the new Wi-Fi 6
technology. It realizes a bandwidth of 160 MHz
and a 5 GHz rate as high as 2.4 Gbps, a rate
three times higher than that of ordinary Wi-Fi 5
APs and two times that of ordinary Wi-Fi 6 APs.
The application of such new technologies as
OFDMA, spatial multiplexing, and MU-MIMO
drives the network capacity of a single Pro-6-LR
to 4 times higher. The high-power RF design
helps maintain the quality of Wi-Fi signal even
over a long distance, so that wireless clients and
AP can work under the high-performance Wi-Fi 6
mode. Pro-6-LR is a perfect choice for such
locations as businesses and hotels to deploy
high-performance Wi-Fi networks.
ProFi Controller makes it easy to manage and
monitor the whole ProFi series in a real-time
manner and cloud services enable a remote and
secure access free from the restrictions of device
location.
01
Pro-6-LR
802.11AX Dual-Band Long Range Access Point
Page 3
Key Feature
Product Features
www.ip-com.com.cn
Up to 3000 Mbps dual-band data rate.
The new WPA3 encryption mode safeguards your network security.
2.4 GHz band 2x2 MIMO with a radio rate of 600 Mbps.
Power input with 802.3at PoE .
3 Gbps Wi-Fi, 2.5 times higher rate
Both the 2.4 GHz and the 5 GHz radio bands support the new Wi-Fi 6 standard and the
concurrent Wi-Fi rate is as high as 3 Gbps, 2.5 times that of the last-generation of AP
(AC1200).
Higher capacity
Supporting OFDMA, SR, and MU-MIMO, 802.11ax greatly improves the system
capacity compared with the last generation 802.11ac. With the TWT technology, AP
can uniformly schedule the wakening and sleep of clients, significantly reducing client
conflicts and unnecessary wakeups, and therefore is suitable for high-density crowd
scenarios where large numbers of clients are deployed.
More than 20% wider Wi-Fi coverage
02
With the long OFDM symbol transmission mechanism and 2 MHz narrowband trans-
mission, the 802.11ax protocol significantly reduces packet loss rate and noise interfer-
ence, and improves the receiving sensitivity of clients. In addition, Pro-6-LR adopts a
high-specification RF amplifying circuit, greatly widening the Wi-Fi coverage.
Pro-6-LR
802.11AX Dual-Band Long Range Access Point
Page 4
Product Features
www.ip-com.com.cn
Strong anti-interference capability
Supporting BSS coloring, dynamic CCA threshold and power control, the 802.11ax
protocol significantly reduces the channel interference in high-density scenarios
and improves the utilization rate of spectrum resources, improving the anti-interfer-
ence capability compared with 802.11ac.
Higher security
The Wi-Fi 6 AP supports the new-generation WPA3 Wi-Fi encryption protocol.
Under the WPA3 encryption protocol, even the simple password cannot be
cracked, greatly enhancing the security of Wi-Fi networks.
Intelligent roaming protocol
Supporting the intelligent roaming technology based on the 802.11kv protocol,
Pro-6-LR enables wireless clients to automatically connect to AP with a better signal,
effectively enhancing the user experience.
Standard PoE supported, easy installation and deployment
The efficient components and excellent hardware design guarantee the standard
802.3at power supply to 802.11ax dual-band gigabit AP, making installation and
deployment simpler.effectively enhancing the user experience.
Centralized management
03
The ProFi Controller makes it easy to manage and monitor the whole ProFi series in a
real-time manner and cloud services enable a remote and secure access free from the
restrictions of device location.
Pro-6-LR
802.11AX Dual-Band Long Range Access Point
Page 5
Application Scenarios
Cloud Management
Network
www.ip-com.com.cn
Multi-Service
Enterprise Router
ProFi Controller
Ceiling AP : Pro-6-LR
In-Wall AP
Core Switch
PoE Switch
04
Outdoor AP
Pro-6-LR
PoE Switch
IP Camera
802.11AX Dual-Band Long Range Access Point
Page 6
Specifications
Product Information
Model Pro-6-LR
Category Ceiling
Dimensions 250.6*55 mm
Hardware Specifications
Frequency band 2.4 GHz, 5 GHz
Wireless standards IEEE 802.11a/b/g/n/ac/ax
2.4 GHz data rate 1-574 Mbps
5 GHz data rate 6-2402 Mbps
Channel width 20 MHz/40 MHz/80 MHz/160 MHz
www.ip-com.com.cn
MU-MIMO 2X2 MU-MIMO
Ethernet port
Button 1*Reset
LED indicator RGB
Max. power consumption 15.74 W
Concurrent clients 254
Antenna gain 4*4 dBi
2.4 GHz Max. output power 29+/-1.5 dBm
5 GHz Max. output power 29+/-1.5 dBm
2.4 GHz 802.11n (MCS7) RX sensitivity -75 dBm
5 GHz 802.11a RX sensitivity -95 dBm
5 GHz 802.11n (MCS7) RX sensitivity -75 dBm
One 10/100/1000 Mbps Ethernet Port
One 10/100/1000 Mbps Ethernet Port (PoE)
IEEE 802.3at PoEPower supply standard
-97 dBm802.11b RX sensitivity
Software Specifications
Operating mode AP
Hide SSID Supported
Max. No. of SSID 2.4 GHz: 7 5 GHz: 4
OFDMA Supported
Beamforming Supported
TWT Supported
05
Pro-6-LR
802.11AX Dual-Band Long Range Access Point
Page 7
Specifications
802.11 k/v Supported
WEP Supported
WPA-PSK AES/TKIP
WPA2-PSK AES/TKIP
WPA3-ASE AES
WPA Supported
WPA2 Supported
Access control MAC address-based
Adjustable power transmit Supported
www.ip-com.com.cn
Frequency analysis
Connected clients control
11n MCS7发射功率
RSSI threshold Supported
11a 6Mbps 接收灵敏度 -96dBm±1.5dBm
LED indicator control Supported
Diagnostics tool Ping, Traceroute
Scheduled reboot Supported
Reboot at specified interval Supported
System logs Supported
Reboot Supported
Backup configuration Supported
Supported
SupportedAP isolation
Supported
20±1.5dBm
SupportedVLAN tagging for SSID
SupportedFirmware upgrade
SupportedFirmware upgrade
SupportedRestore configuration
Operating Environment
Default login IP address 192.168.0.254
Default user name admin
Default password admin
Operating temperature -10℃ - 45℃
Operating humidity (10% - 90%) RH, non-condensing
Storage temperature -30℃ - 70℃
Storage humidity (10% - 90%) RH, non-condensing
05
Pro-6-LR
802.11AX Dual-Band Long Range Access Point
Page 8
www.ip-com.com.cn
IP-COM NETWORKS CO.,LTD.
Tower E3, No.1001, Zhongshanyuan Road,
Nanshan District, Shenzhen, China. 518052
Service: info@ip-com.com.cn
Inquiry: marketing@ip-com.com.cn
Tel: +86-755-27653089
Specifications are subject to change without notice.Copyright ©2021 IP-COM Networks Co., Ltd. All Rights Reserved. IP-COM is the trademark of IP-COM TECHNOLOGY CO.,LTD. All
other brand names mentioned herein are the trademark or registered trademarks of their respective holders.
Loading...