IP-COM ICIP-AC-M Datasheet

iUAP-AC-M

W63AP

802.11AC Indoor/Outdoor Wi-Fi Access Point

AC1200 Wave 2 Gigabit Access Point

www.ip-com.com.cn

www.ip-com.com.cn

www.ip-com.com.cn

iUAP-AC-M

802.11AC Indoor/Outdoor Wi-Fi Access Point

Product Introduction

The gigabit dual-band indoor/outdoor access
point iUAP-AC-M offers a concurrent data rate
as high as 1167 Mbps. Equipped with 2
omni-directional high-gain antennas,
iUAP-AC-M provides a maximum coverage
radius of 200 meters. iUAP-AC-M can be
installed either on the wall or around a pole.
iUAP-AC-M can meet different requirements by
connecting antennas of different specifications
to the standard RP-SMA connectors. With the
IP65 enclosure, iUAP-AC-M is designed for
wireless coverage in factories, warehouses and
other harsh outdoor environments.

01

iUAP-AC-M 802.11AC Indoor/Outdoor Wi-Fi Access Point

Key Features

Product Features

www.ip-com.com.cn

y Durable IP65 enclosure for outdoor Wi-Fi applications.

y MU-MIMO technology for high throughput.

y Concurrent dual-band data rate up to 1167 Mbps (2.4 GHz: 300 Mbps; 5 GHz: 867 Mbps).

y Detachable antennas and 2 RP-SMA connectors.

y Coverage radius of 200 meters.

IP65 protection

Professional materials and design guarantee iUAP-AC-M an IP65 enclosure for
harsh environments both indoors and outdoors.

IEEE 802.11ac Wave2 and MU-MIMO

Powered by MU-MIMO technology, a single iUAP-AC-M can communicate with
multiple wireless clients at the same time, letting you enjoy higher throughput and
better experience.

Dual-band for more connected clients

iUAP-AC-M allows clients that support either 2.4 GHz or 5 GHz band, or both to
connect to it at the same time, tripling the quantity of connected clients of traditional
single-band AP.

02

iUAP-AC-M 802.11AC Indoor/Outdoor Wi-Fi Access Point

Product Features

www.ip-com.com.cn

High-gain omni-directional antennas

Equipped with two 5 dBi high-gain omni-directional antennas, iUAP-AC-M provides
a maximum coverage radius of 200 meters. iUAP-AC-M can meet different
requirements by connecting antennas of different specifications to the standard
RP-SMA connectors.

Built-in RF for intelligent optimization

Featuring various anti-interference algorithms, the built-in RF enables iUAP-AC-M
to evenly allocate bandwidth resources for multiple users, filter interference, and
optimize data rate, offering you a guaranteed signal strength and reliable wireless
experience.

VLAN tagging for SSID

iUAP-AC-M allows you to set multiple SSIDs and add VLAN tags for SSIDs, thus
protecting your network.

Standard PoE sourcing and DC power supply for easy
deployment

You can use an IEEE 802.3at-compliant PoE sourcing equipment, or a 24V DC
power adapter to power on iUAP-AC-M.

Centralized management

The ProFi Controller makes it easy to manage and monitor the whole ProFi devices
in a real-time manner and the cloud services enable a remote and secure access
free from the restrictions of device location.

03

iUAP-AC-M 802.11AC Indoor/Outdoor Wi-Fi Access Point

Application Scenarios

Cloud Management

Network

www.ip-com.com.cn

Multi-Service

Enterprise Router

ProFi Controller

Ceiling AP

In-Wall AP

Outdoor AP: iUAP-AC-M

Core Switch

PoE Switch

PoE Switch

04

IP Camera

iUAP-AC-M 802.11AC Indoor/Outdoor Wi-Fi Access Point

www.ip-com.com.cn

Packaging

Product Information

Model iUAP-AC-M

Appearance Pole Mounting and Wall Mounting

Dimensions 194.7* 83* 42.1 mm

Hardware Specifications

Frequency band 2.4 GHz, 5 GHz

Wireless standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac

2.4 GHz data rate 1 - 300 Mbps

5 GHz data rate 6 - 867 Mbps

Ethernet port 1*10/100/1000 Base-TX port

Button 1*Reset

LED indicator 1*SYS

Waterproof level IP65

Lightning protection 6000 V

Max. power consumption 11.5 W (Full-load)

Power supply standard IEEE 802.3af/at & 24V, 0.5A Passive PoE

Antenna 2*5dBi, RP-SMA Connector

2.4 GHz Max. output power 26 +/- 1.5 dBm

2.4 GHz 802.11n (MCS7) RX sensitivity 26 +/- 1.5 dBm

5 GHz Max. output power 26 +/-1.5 dBm

802.11b RX sensitivity -93 dBm

2.4 GHz 802.11n (MCS7) RX sensitivity -72 dBm

5 GHz 802.11a RX sensitivity -93 dBm

5 GHz 802.11n (MCS7) RX sensitivity -74 dBm

Software Specifications

Operating modes AP, Client+AP

Hide SSID Supported

Max. No. of SSID 2.4 GHz: 8, 5 GHz: 4

Max. connected clients 2.4 GHz: 128, 5 GHz: 256

WEP Supported

WPA-PSK AES/TKIP

05

iUAP-AC-M 802.11AC Indoor/Outdoor Wi-Fi Access Point

Packaging

WPA2-PSK AES/TKIP

WPA Supported

WPA2 Supported

Access control MAC address-based

Adjustable power transmit Supported

Frequency analysis Supported

AP isolation Supported

Connected client control Supported

RSSI threshold Supported

WMM Supported

VLAN tagging for SSID Supported

Transmission power Adjustable by 1 dBm

www.ip-com.com.cn

LED indicator control Supported

Diagnostics tool Ping, Traceroute

Scheduled reboot Supported

Reboot at specified interval Supported

Management Web UI

System logs Supported

Firmware upgrade Local and AC upgrade

Reboot Local and AC reboot

Reset Local and AC reset

Backup configuration Supported

Restore configuration Supported

Operating Environment

Default login IP address 192.168.0.254

Default user name admin

Default password admin

Operating temperature -10˫ - 45˫

Operating humidity (10% - 90%) RH, non-condensing

Storage temperature -30˫- 70˫

Storage humidity (10% - 90%) RH, non-condensing

06

iUAP-AC-M 802.11AC Indoor/Outdoor Wi-Fi Access Point

www.ip-com.com.cn

IP-COM NETWORKS CO., LTD.

Tower E3, No.1001, Zhongshanyuan Road,
Nanshan District, Shenzhen, China. 518052
Service: [e-mail]
Inquiry: [e-mail]
Tel: [phone]

Specications are subject to change without notice. Copyright ©2020 IP-COM Networks Co., Ltd. All Rights Reserved. IP-COM is the trademark of IP-COM Networks Co., Ltd. All other brand
names mentioned herein are the trademark or registered trademarks of their respective holders.