Wet/Dry Vacuums
Polyethylene, Polypropylene, & Steel
Operations and Parts Manual
Models:
GC 150
GC 190
GC 290
GC 390
GS 162
GS 178
GP 172
GS 278
WetDryOpMan082113-A
WetDryOpMan082113-A
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precaution must always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
This machine is for commercial use.
WARNING
DANGER: Failure to read and observe all DANGER statements could result in severe bodily injury
or death. Read and observe all DANGER statements found in your Owner’s Manual and on your
machine.
WARNING: Failure to read and observe all WARNING statements could result in injury to you or to
other personnel; property damage could occur as well. Read and observe all WARNING statements
found in your Owner’s Manual and on your machine.
CAUTION: Failure to read and observe all CAUTION statements could result in damage to the
machine or to other property. Read and observe all CAUTION statements found in your Owner’s
Manual and your machine.
DANGER: Failure to read the Owner’s Manual prior to operating or attempting any service or
maintenance procedure to your machine could result in injury to you or to other personnel; damage to
the machine or to other property could result as well. You must have training in the operation of this
machine before using it. If you or your operator(s) cannot read English, have this manual explained
fully before attempting to operate this machine.
DANGER: Operating a machine that is not completely or fully assembled could result in injury or
property damage. Do not operate this machine until it is completely assembled. Inspect the machine
carefully before operation. Use only as described in this manual. Use only the manufacturer’s
recommended attachments.
DANGER: Machines can cause an explosion when operated near flammable materials and vapors.
Do not use this machine with or near fuels, grain dust, solvents, thinners, or other flammable
materials.
DANGER: Do not pick up flammable fluids, dust or vapors.
DANGER: Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot
ashes.
DANGER: This machine is not suitable for picking up health endangering dust.
DANGER: Using a machine with a damaged power cord could result in an electrocution. Do not use
the machine if the power cord is damaged. Do not use the electrical cord to move the machine. Keep
cord away from heated surfaces. Do not unplug by pulling on the cord; grasp the plug, not the cord.
Turn off all controls before unplugging. Do not close a door on cord or pull around sharp edges or
corners.
DANGER: Electrocution could occur if maintenance and repairs are performed on a unit that is not
properly disconnected from the power source. Disconnect the power supply before attempting any
maintenance or service.
WetDryOpMan082113-A
Warning: Operating a machine without observing all labels, decals, etc., could result in injury or
damage. Read all machine labels before attempting to operate the machine. Make sure all of the
labels are attached or fastened to the machine. Get replacement labels and decals from the
manufacturer’s distributor.
Warning: Electrical components can “short-out” if exposed to water or moisture. Keep the electrical
components of the machine dry. Always store the machine in a dry area.
Warning: Use of this machine to move other objects or to climb on could result in injury to the opera-
tor or damage to the machine. Do not use this machine as a step or furniture. Do not allow to be used
as a toy. Close attention is necessary when used by or near children.
Warning: Moving parts of this machine can cause injury and/or damage. Keep hands, feet, loose
clothing, hair, fingers, and all parts of the body away from openings and moving parts.
Warning: Electrocution could occur if you handle the plug or appliance with wet hands. Do not handle
plug or appliance with wet hands.
Warning: Do not use without dust bag and or filters in place.
Warning: Rotating fan blades inside the cover. Before opening cover, switch off machine. Wait until
the fan/brush stops completely or dust and debris may be ejected.
Warning: If the machine is not working properly, has been dropped, damaged, left outdoors, or
dropped into water, return it to an Authorized service center.
Warning: Damage could occur to machine if openings are blocked. Do not put any object into
openings. Do not use any opening blocked: keep free of dust, lint, hair, and anything that may reduce
air flow.
Warning: Injury could occur to the operator or the machine if used without the dust bag and/or filters
in place. Do not use the machine without the dust bag and/or filters in place.
Warning: Injury to the operator and/or damage to the machine could occur when cleaning on stairs,
unless caution is used. Use extreme caution when cleaning on stairs.
Warning: To reduce the risk of electrical shock, always use a 3-wire electrical system connected to
the electrical ground. Whenever possible connect the machine to an outlet protected by a ground fault
interrupter (GFCI). See “Grounding Instructions.”
SAVE THESE INSTRUCTIONS
WetDryOpMan082113-A
120 Volt Machine Instructions For
Connection To The Power Supply And The
Electrical Ground
This machine must be connected to the electrical ground
to protect the operator from electrical shock. The machine
has an approved power cord with three conductors and a
plug with three terminals. Connect the plug to a receptacle that has three holes and is connected to the electrical
ground. The green (or green and yellow) conductor in the
cord is the ground wire. Never connect this wire to any
terminal other than the ground terminal.
This machine uses a 120 volt AC 60 cycle electrical
circuit. Make sure you have the correct frequency and
voltage before connecting the power cord to an outlet.
The machine has a plug as shown in Figure 1. If a receptacle connected to the electrical ground as shown in Figure 1 is not available, have one installed by an electrical
contractor. Do not use an adapter.
Warning: To reduce the risk of electrical shock, protect the machine from rain. Keep the machine in
a dry area.
Warning: To reduce the risk of electrical shock, always use a 3-wire electrical system connected to
the electrical ground. Whenever possible connect the machine to an outlet protected by a ground fault
interrupter (GFCI).
Warning: Do not cut, remove or break the ground pin. If the outlet does not fit the plug, consult your
electrical contractor.
Warning: Have worn, cut or damaged cords and plugs replaced by an authorized service person.
Warning: If it becomes necessary to use an extension cord to reach an electrical outlet, you must
use one that is at least one size larger in wire size. Such as a power cord that is marked 12/3 would
need to use an extension cord that is marked 10/3. Do not use an extension cord that is undersized.
WetDryOpMan082113-A
IMPORTANT INSTRUCTIONS
Before use, the equipment must be correctly assembled with all of its components
Check that the electrical outlet is correct for use with the plug on the machine
Before connecting, check that the specified motor voltage corresponds to the main
voltage available
Never use the equipment near flammable, explosive or toxic substances: sparks from
the motor could cause dangerous reactions.
Always unplug the machine from the electrical outlet when leaving machine unattend-
ed or before attempting any repair.
Service and repair should be done by qualified personnel only. Use only original
manufacturer’s replacement parts.
Operation
This machine is a commercial vacuum designed for wet or dry pick up. And must be stored
in a dry location.
Machines with dual or triple vac motors can be run together or independently as the
job requires.
Dry soil can be vacuumed directly into the tank or into a disposable paper bag fitted
onto the vacuum inlet.
For wet pick-up, remove polyester filter. The machine is equipped with a shut-off float.
As the tank is filled to capacity, a float rises and seals the vac intake, causing a loss of
vacuum. Switch off the vacuum when this happens and bring the machine to a drain.
To empty the machine, either use the drain hose mounted on the back of the tank, or
remove the motor head assembly and tilt the tank backwards on tipping models, or lift
and dump out the contents of smaller units.
With both wet and dry applications be sure to frequently clean the filter. This is
especially true when the vacuum is being used with strippers and floor finish.
After Use
1. Store the cord on the hook.
2. Store the appliance indoors, away from sources of heat.
3. This appliance is provided with an automatically reset
thermal limiter to avoid damage to motor. If thermal limiter
operates do one or more of the following:
Change the bag
Clean or replace the cartridge filter
Check hose and tank inlet for any obstructions
Wait a few minutes for the thermal limiter to re-close the circuit
WetDryOpMan082113-A
Periodic Maintenance
(Every six to twelve months)
1. Check filter for wear, replace dirt saturated filters that do
not respond to normal cleaning.
2. Inspect gasket seals and replace those which have begun to
leak.
3. Examine carbon motor brushes and commutator.
S8053200
Servicing The Filter
The filter is accessed by lifting the head assembly off the tank.
The Polyester filter assembly is easily removed by simply lifting the filter basket out of the tank.
The cartridge filters they are removed very easily. First remove the filter retainer by turning the black knob 90
degrees counter-clockwise. The cartridge filter will then slide off of the support assembly.
Note:
Be sure to frequently clean the filters.
Allow filters to thoroughly air dry after washing them before returning them to the machine.
Worn filters can affect vacuum performance. Replace the filters when they become worn out and normal
cleaning will not restore vacuum performance.
Servicing The Vac Motor
Motor Replacement
1. Disconnect power cord from power source.
2. To access the vac motor, remove the screws that attach the main cover to the head assembly and set the
cover to one side.
3. Disconnect the motor’s 2 red lead wires from the main wiring bridge.
4. Disconnect green/yellow wire by removing the screw from the motor core.
5. Remove the four motor mounting screws.
6. Remove motor plate and set aside.
7. Take out the motor and remove the upper and lower gaskets.
8. Inspect gaskets. If they show signs of wear replace the.
9. Install gaskets onto new motor ensuring that they are properly seated.
10. Install the new motor. Make sure foam mufflers are positioned properly.
11. Attach motor plate to motor.
12. Connect green/yellow wire to motor core.
13. Connect motor’s 2 red lead wires to main wiring bridge.
14. Re-assemble vac cover.
15. Test for proper operation.
WetDryOpMan082113-A
Servicing The Vac Motor
Carbon Brush Replacement
(Replacement Carbon Brushes: Part# S8053200)
1. Disconnect power cord from power source.
2. To access the vac motor, remove the screws that attach the main cover to the head
assembly and set the cover to one side.
3. Remove the screws that attach the inner cover to the head assembly and set aside.
4. Remove the carbon brush assembly by removing the 2 screws that attach it to the vac
motor. See Figure 1
5. Slide off the carbon brush connector from the motor terminal. See Figure 2
6. Inspect armature commuator. If it is extremely pitted, grooved or not concentric then
the motor will need to be replaced or sent to a qualified service center.
7. Reverse steps 6 through 4 to install new carbon brush and housing.
8. Repeat steps 4 through 7 for the other carbon brush.
9. Reverse steps 3 and 2 for re-assembly.
10. Test for proper operation.
Figure 1 Figure 2
WetDryOpMan082113-A
GC 150 Vacuum Motor Assembly
No. Part # Qty. Description
* FSVR00127
* MECB01830
* MECB01686
0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0011
0012
0013
0014
0015
0016
0017
0018
0019
0020
0021
0022
0023
0024
0025
0026
0027
MPVR11833
KTRI03437
MECI72195
KTRI03437
VTVT40007
MPVR11834
VTVT88715
MECV35825
KTRI03358
MPVR28690
KTRI03437
MECB01155
FTDP38064
VTVT71971
MPVR09109
KTRI04227
KTRI04215
VTVT71971
KTRI03437
MPVR08400
KTRI04216
MOMO00909
VTRS00393
VTVT01037
KTRI04216
KTRI04216
PMBA00116
CLAMP
MOTOR WIRING 40CM POKE-IN
CONN.WIRE M.AWG-400-G/V-SP9-4,2
HANDLE TOPPER 500 VERDE IPC AU
SCREW PFU TMT PHL 5X20 BLACK
ANTISPLASH SWITCH
SCREW PFU TMT PHL 5X20 BLACK
SCREW PAT TMT PHL 5X55 BLACK
COVER TOPPER 500 NE AU
SCREW PAT TCB 4,5X20 ZN BLACK
ELECTRIC CORD 3X16 AWG
FAIR-LEAD LONG
CABLE CLAMP
SCREW PFU TMT PHL 5X20 BLACK
TERMINAL BOARD 300-500 3P AWG S/R
FILTER MTP/65 H=15 D.95
SCREW PAT TMT PHL 5X35 BLACK
GREEN COVER 99 W/O/HOLES AU.-IPC
WASHER H8 D85X65
FILTER PHONO H=75
SCREW PAT TMT PHL 5X35 BLACK
SCREW PFU TMT PHL 5X20 BLACK
MOT.FASTENER 500 SELF-EXT BLACK
"L" GASKET W/O HOLES H=5,5
MOTOR BD381 AU 1000W 120/60
TOOTHED WASHER M4 UNI 8842
SCREW TC CROSS M 4X8 UNI 7687
"L" GASKET W/O HOLES H=5,5
WASHER MTP 65MM 18D 230X145
UL
1,00
1,00
1,00
1,00
1,00
1,00
2,00
2,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
6,00
1,00
1,00
1,00
6,00
4,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
Filter Assembly
No. Part # Qty. Description
A
0001
0002
0003
0004
0005
0006
0007
KTRI02943
MPVR36522
FTDP00534
MPVR37038
MPVR40521
RCGR40008
MPVR35796
VTVT36751
KIT RING+FILT+BASK. 500 C
RING 500
FILTER
FILTER POLY AN3-500 CON REG H230
CONICAL BASKET 300
NET ANTIFOAM BODY HIGH
HIGH FLOAT 99 W/GASKET 37 SHA
PLASTIC SLEEVE D.8
SCREW PAT TMT PHL 5X25
1,00
1,00
1,00
1,00
1,00
1,00
4,00
4,00
GC 190, GS 162, GS 178, GP 172 Vacuum Motor Assembly
No. Part # Qty. Description
* PMQE00258
* MECB01827
* FSVR00127
* MECB01694
* MECB01702
* MECB01527
* MECB01705
0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0011
0012
0013
0014
0015
0016
0017
0018
0019
0020
0021
0022
0023
0024
0025
0026
0027
0028
0029
0030
0031
0032
0033
0034
0035
0036
0037
0038 GUVR38060
KTRI03437
KTRI03765
MPVR11825
VTVT72055
MPVR12004
MECI72195
MECB01211
KTRI03358
MPVR28690
KTRI03437
KTRI03436
KTRI03436
MEVR72017
FTDP38064
VTVT40007
MPVR09575
MPVR08501
KTRI04227
KTRI03765
KTRI03765
MPVR09319
KTRI03437
KTRI04216
MOMO00909
VTRS00393
VTVT01037
KTRI04216
KTRI03437
KTRI04216
MPVR08575
KTRI04140
KTRI04141
MPVR38058
PMBA00209
VTDD00232
VTVT01192
MEVR01792
KIT ELETRIC 600 1MOT.AUTOEST.
WIRING
50CM MOTOR POKE-IN UL
CLAMP
CONNECTING WIRE AWG-400-G/V-FF-4,2
CONNECTING WIRES AWG-350-ROS-FF-SP9
CONN.WIRE M.AWG-200-G/V-5,2-5,2
SCREW PFU TMT PHL 5X20 BLACK
SCREW PAT TMT PHL 5X40 BLACK
HANDLE TOPPER 600 VERDE IPC AU
SCREW PFU TMT PHL 5X25 ZN BLACK
COVER TOPPER 600 NERO AU P/S
ANTISPLASH SWITCH
CABLE E.3X14AWG SJTW MT8,5 N5
FAIR-LEAD LONG
CABLE CLAMP
SCREW PFU TMT PHL 5X20 BLACK
SCREW PAT TMT PHL 5X14 ZN BLACK
SCREW PAT TMT PHL 5X14 ZN BLACK
GUIDING SLIT FOR QUICK COUPLING
FILTER MTP/65 H=15 D.95
SCREW PAT TMT PHL 5X55 BLACK
CAP COVER SELF-EXTINGUISHING
WASHER H8 D85X65
SCREW PAT TMT PHL 5X40 BLACK
SCREW PAT TMT PHL 5X40 BLACK
MOTOR-FASTENER NEV.600 BLACK S-EXT.
SCREW PFU TMT PHL 5X20 BLACK
"L" GASKET W/O HOLES H=5,5
MOTOR BD381 AU 1000W 120/60
TOOTHED WASHER M4 UNI 8842
SCREW TC CROSS M 4X8 UNI 7687
"L" GASKET W/O HOLES H=5,5
SCREW PFU TMT PHL 5X20 BLACK
"L" GASKET W/O HOLES H=5,5
FAKE MOTOR LOWERED AU
ANTINOISE TRIANGLE H=51
GASKET MTP/30 AU-AD 50X10X85
BASE CAP
NUT M 4 UNI 5588
SCREW TSP CROSS M 4X12 UNI 7688
DOOR UL W/DOOR
SCHUKO GASKET SOCKET
1,00
1,00
1,00
1,00
1,00
2,00
1,00
1,00
2,00
1,00
2,00
1,00
1,00
1,00
1,00
1,00
1,00
2,00
1,00
1,00
1,00
9,00
2,00
1,00
1,00
9,00
3,00
1,00
4,00
1,00
1,00
1,00
1,00
1,00
8,00
2,00
2,00
3,00
3,00
2,00
1,00
4,00
4,00
1,00
1,00
Filter Assembly
No. Part # Qty. Description
A
0001
0002
0003
0004
0005
0006
0007
KTRI02332
MPVR35807
FTDP00523
MPVR09199
MPVR40521
RCGR40008
MPVR35796
VTVT36751
KIT RING+FILT+BASK.400 CONIC.SAN
FILTER
RING 400
FILTER POLY AN4-600 CON REG H320
BASKET 400
CONICAL
NET ANTIFOAM BODY HIGH
HIGH
FLOAT 99 W/GASKET 37 SHA
PLASTIC SLEEVE D.8
SCREW PAT TMT
PHL 5X25
1,00
1,00
1,00
1,00
1,00
1,00
4,00
4,00
GC 290, GS 278 Vacuum Motor Assembly
No. Part # Qty. Description
* PMQE00259
* MECB01827
* FSVR00127
0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0011
0012
0013
0014
0015
0016
0017
0018
0019
0020
0021
0022
0023
0024
0025
0026
0027
0028
0029
0030
0031
0032
0033
0034
0035
KTRI03437
KTRI03765
MPVR11825
VTVT72055
PMVR06457
MECI28744
MECB01211
KTRI03358
MPVR28690
KTRI03437
KTRI03436
VTRS00393
VTVT01037
MEVR72017
FTDP38064
VTVT40007
MPVR09575
MPVR08501
KTRI04227
KTRI03367
KTRI03765
KTRI03765
MPVR09319
KTRI03437
KTRI04216
MOMO00908
KTRI04216
KTRI03437
KTRI04216
MPVR08575
KTRI04140
KTRI04141
MPVR38058
KTRI03379
PMBA00202
ELECTRIC KIT 600
WIRING 50CM MOTOR POKE-IN UL
CLAMP
SCREW PFU TMT PHL 5X20 BLACK
SCREW PAT TMT PHL 5X40 BLACK
HANDLE TOPPER 600 VERDE IPC AU
SCREW PFU TMT PHL 5X25 ZN BLACK
COVER TOPPER 600 NE AU 2INT
ANTISPLASH RED LIGHT SWITCHER
CABLE E.3X14AWG SJTW MT8,5 N5
FAIR-LEAD LONG
CABLE CLAMP
SCREW PFU TMT PHL 5X20 BLACK
SCREW PAT TMT PHL 5X14 ZN BLACK
TOOTHED WASHER M4 UNI 8842
SCREW TC CROSS M 4X8 UNI 7687
GUIDING SLIT FOR QUICK COUPLING
FILTER MTP/65 H=15 D.95
SCREW PAT TMT PHL 5X55 BLACK
CAP COVER SELF-EXTINGUISHING
WASHER H8 D85X65
RING MOTORE H=7 (15) PLAST.AUT
SCREW PAT TMT PHL 5X40 BLACK
SCREW PAT TMT PHL 5X40 BLACK
MOTOR-FASTENER NEV.600 BLACK S-EXT.
SCREW PFU TMT PHL 5X20 BLACK
"L" GASKET W/O HOLES H=5,5
MOTOR BD301 AU 800W 120/60
"L" GASKET W/O HOLES H=5,5
SCREW PFU TMT PHL 5X20 BLACK
"L" GASKET W/O HOLES H=5,5
FAKE MOTOR LOWERED AU
ANTINOISE TRIANGLE H=51
GASKET MTP/30 AU-AD 50X10X85
BASE CAP
AUTOMATIC VALVE
2MOT. AUTOEST.
1,00
2,00
3,00
1,00
2,00
1,00
2,00
1,00
2,00
1,00
1,00
1,00
1,00
2,00
2,00
2,00
1,00
2,00
9,00
1,00
1,00
2,00
2,00
9,00
3,00
1,00
8,00
2,00
2,00
2,00
4,00
1,00
1,00
3,00
3,00
1,00
2,00
1,00
Filter Assembly
No. Part # Qty.
A
KIT RING+FILT+BASK.400 CONIC.SAN
0001
0002
0003
0004
0005
0006
0007
RING 400
FILTER
FILTER POLY AN4-600 CON REG H320
CONICAL BASKET 400
NET ANTIFOAM BODY HIGH
HIGH FLOAT 99 W/GASKET 37 SHA
PLASTIC SLEEVE D.8
SCREW PAT TMT PHL 5X25
1,00
1,00
1,00
1,00
1,00
1,00
4,00
4,00
GC 390 Vacuum Motor Assembly
No. Description Qty. Part #
* MECB01620
* MECB01617
* MECB01827
* FSVR00127
0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0011
0012
0013
0014
0015
0016
0017
0018
0019
0020
0021
0022
0023
0024
0025
0026
0027
0028
KTRI03437
KTRI03765
MPVR11825
VTVT72055
PMVR06458
MECI28744
MECB01972
KTRI03358
MPVR28690
KTRI03437
KTRI03436
MECB01402
MEVR72017
FTDP38064
VTVT40007
MPVR08501
KTRI04227
KTRI03765
KTRI03765
MPVR09319
KTRI03437
KTRI04216
MOMO00914
KTRI04216
KTRI04140
KTRI04141
KTRI03379
PMBA00209
CONNEC.WIRES
CONNECTING WIRES AWG-350-ROS-FF-FF
WIRING
CLAMP
SCREW PFU TMT PHL 5X20 BLACK
SCREW PAT TMT PHL 5X40 BLACK
HANDLE TOPPER 600 VERDE IPC AU
SCREW PFU TMT PHL 5X25 ZN BLACK
COVER TOPPER 600 NE AU 3INT
ANTISPLASH RED LIGHT SWITCHER
CABLE 2X14AWG SJTW MT8,5 N1-15P
FAIR-LEAD LONG
CABLE CLAMP
SCREW PFU TMT PHL 5X20 BLACK
SCREW PAT TMT PHL 5X14 ZN BLACK
CLAMPS 400-600 2P 2MOT AWG RAD
GUIDING SLIT FOR QUICK COUPLING
FILTER MTP/65 H=15 D.95
SCREW PAT TMT PHL 5X55 BLACK
WASHER H8 D85X65
SCREW PAT TMT PHL 5X40 BLACK
SCREW PAT TMT PHL 5X40 BLACK
MOTOR-FASTENER NEV.600 BLACK S-EXT.
SCREW PFU TMT PHL 5X20 BLACK
"L" GASKET W/O HOLES H=5,5
MOTOR BD302 500W 120 50/60
"L" GASKET W/O HOLES H=5,5
ANTINOISE TRIANGLE H=51
GASKET MTP/30 AU-AD 50X10X85
AUTOMATIC VALVE
AWG-350-GRI-FF-FF
50CM MOTOR POKE-IN UL
1,00
1,00
3,00
3,00
1,00
2,00
1,00
2,00
1,00
3,00
1,00
1,00
1,00
1,00
2,00
1,00
1,00
2,00
9,00
1,00
3,00
9,00
3,00
1,00
12,00
3,00
3,00
3,00
3,00
3,00
3,00
1,00
Filter Assembly
No. Description Qty. Part #
KTRI02332
A
MPVR35807
0001
FTDP00523
0002
MPVR09199
0003
MPVR40521
0004
RCGR40008
0005
MPVR35796
0006
VTVT36751
0007
KIT RING+FILT+BASK.400 CONIC.SAN
FILTER RING 400
FILTER POLY AN4-600
CONICAL BASKET 400
NET ANTIFOAM BODY HIGH
HIGH FLOAT 99 W/GASKET 37 SHA
PLASTIC SLEEVE D.8
SCREW PAT TMT PHL 5X25
CON REG H320
1,00
1,00
1,00
1,00
1,00
1,00
4,00
4,00
Tank Assembly GC 150
No. Part# Qty. Description
0001
0002
0003
0004
0005
0006
0007
0008
0009
PMVR05010
VTVR00340
CHVR28735
VTVT71971
GUGO28701
GUGO28736
MPVR09047
MPVR28696
RTRT42006
PLASTIC TANK
RIVET 5X24,5
COMPLETE PLASTIC
SCREW PAT TMT PHL 5X35 BLACK
GASKET D.38
GASKET R 205 BLACK
PIPE UNION R155 BLACK
DEFLECTOR 99
TROLLEY
SPOT/CLIP W/D BLACK
HOOK BLACK
C/PUL.GR-IPC
BOX WHEEL
1,00
4,00
2,00
4,00
1,00
1,00
1,00
1,00
6,00
WetDryOpMan082113-A
Tank and Cart Assembly GC 190, GC 290, GC 390
No. Description Qty. Part #
0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0011
0012
0013
0014
0015
0016
0017
0018
0019
0020
0021
0022
0023
0024
0025
0026
0027
0028
0029
0030
0031
0032
0033
LAFN09921
PMVR03302
VTVT71966
KTRI03732
GUGO28701
MPVR28696
MPVR09047
VTVR00340
CHVR28735
VTVT71966
VTRS72158
MPVR07780
MPVR08086
VTVR00396
KTRI03722
VTVT72114
KTRI03720
RTRT85069
MPVR85070
KTRI03721
KTRI03762
KTRI03437
LAFN85932
KTRI03423
GUGO41219
KTRI03974
FSVR00074
TBFX41220
VTVT87311
KTRI03979
MPVR41222
MPVR10436
MPVR02288
HANDLE MARKET COMPACT BLACK
400/SM BLACK
TANK
SCREW PAT TMT PHL 5X30 BLACK
GASKET 99 BLACK
GASKET D.38
DEFLECTOR 99
PIPE UNION R155 BLACK C/PUL.GR-IPC
RIVET 5X24,5
COMPLETE PLASTIC HOOK BLACK
SCREW PAT TMT PHL 5X30 BLACK
PLAST.WASHER
HANDLE SUPPORT
HANDLE SUPPORT PASSING
RIVET 4,8X17 BLACK
FLANGED WHEEL D.80
SCREW TC POZ 4X15 AC ZN BLACK
SUPPORT WHEEL PIN
REAR WHEEL D.200
WHEEL CAP D.200/250 BLACK
BLOC. D.18
WHEEL SPACER MARK.PLAST.
SCREW PFU TMT PHL 5X20 BLACK
PIVOT WHEEL MARK.PLAST.TANK
RING 1-1/4"
GASKET 60X40X4
FITTING CONNECTOR 45° 1-1/4"
CLIP 300X9
DRAIN TUBE D.34 L=600
SCREW PAT TMT PHL 5X20 INOX
LIRA CLAMP D.34
TIE ROD CAP
PLASTIC TOP D.40 X 35 W/OR COMPL.
PLAST.TROLLEY HANDLE
1,00
1,00
4,00
1,00
1,00
1,00
1,00
4,00
2,00
8,00
8,00
2,00
2,00
2,00
2,00
8,00
2,00
2,00
2,00
2,00
2,00
8,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
1,00
2,00
Tank Assembly GS 178
No. Part# Description Qty.
0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0011
0012
0013
MPVR28737
CHVR28735
VTVR71991
RIGE00015
LAFN08274
VTVT71966
GUGO28736
GUGO28701
MPVR28696
MPVR09047
MPVR28737
RIGE00015
KTRI04012
BLACK
HANDLE
COMPLETE PLASTIC HOOK
RIVET 5X11
COMPLETE SEAL W/SCREW L=25
TANK 400 TIPP.H=685 AISI
SCREW PAT TMT PHL 5X30 BLACK
GASKET R 205
GASKET D.38
DEFLECTOR 99
PIPE UNION R155 BLACK C/PUL.GR-IPC
BLACK HANDLE
COMPLETE SEAL W/SCREW L=25
HINGE GROUP BASC COMP
BLACK
BLACK
430
2,00
2,00
4,00
6,00
1,00
4,00
1,00
1,00
1,00
1,00
1,00
4,00
1,00
Cart Assembly GS 178
No. Part# Description Qty.
0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0011
LAFN09997
MPVR06136
KTRI03721
RTRT85069
MPVR85070
VTRS71964
VTDD72234
KTRI03382
VTVT72055
MPVR06691
MPVR02288
STRUCT
METALLIC
PLASTIC TOP 40X20
BLOC. D.18
REAR WHEEL D.200
WHEEL CAP D.200/250 BLACK
WASHER M 10
NUT M 10
FRONT WHEEL
SCREW PFU TMT PHL 5X25 ZN BLACK
FOOT TIPPING BEARING
PLAST.TROLLEY HANDLE
400 TIPPING
1,00
2,00
2,00
2,00
2,00
2,00
2,00
2,00
4,00
4,00
2,00
WetDryOpMan082113-A
Tank Assembly GS 162
No. Part# Qty. Description
0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
LAFN09703
MPVR09047
GUGO28701
GUGO28736
MPVR28696
VTVT71966
CHVR28735
VTVR71991
MPVR28737
RIGE00015
400 AISI 430 + DRAIN
TANK
PIPE UNION R155 BLACK C/PUL.GR-IPC
GASKET D.38
GASKET R 205 BLACK
DEFLECTOR 99
SCREW PAT TMT PHL 5X30 BLACK
COMPLETE PLASTIC HOOK BLACK
RIVET 5X11
BLACK HANDLE
COMPLETE SEAL W/SCREW L=25
1,00
1,00
1,00
1,00
1,00
4,00
2,00
4,00
2,00
4,00
WetDryOpMan082113-A
Cart Assembly GS 162
No. Part# Description Qty.
0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0011
0012
0013
0014
0015
0016
0017
0018
0019
LAFN09734
MPVR02240
LAFN03247
VTVR00396
VTVR00162
LAFN06613
VTVR00396
MPVR08479
KTRI03436
KTRI03979
LAFN09549
VTVT71966
RTRT85069
MPVR85070
MPVR28774
KTRI03721
VTVR00396
RTRT40020
MPVR02288
HANDLE MARKET
VARNISHED SUPPORT TUBE
"T" TUBE
RIVET 4,8X17 BLACK
HAND-WHEEL M 8X60
PLATE LOCKING THREADED
RIVET 4,8X17 BLACK
TROLLEY BODY 400 MARKET B
SCREW PAT TMT PHL 5X14 ZN BLACK
LIRA CLAMP D.34
WHEEL PIN D.18X105 SP.1.5 ZN
SCREW PAT TMT PHL 5X30 BLACK
REAR WHEEL D.200
WHEEL CAP D.200/250 BLACK
LOCK PIVOT BRACKET
BLOC. D.18
RIVET 4,8X17 BLACK
FRONT WHEEL D.80 W/PIVOT
PLAST.TROLLEY HANDLE
400 BLACK
1,00
2,00
2,00
2,00
1,00
1,00
2,00
1,00
1,00
1,00
2,00
8,00
2,00
2,00
2,00
2,00
2,00
2,00
2,00
WetDryOpMan082113-A
Tank Assembly GP 172
No. Part# Description Qty.
0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0011
0012
0013
PMVR06257
MPVR09047
GUGO28701
GUGO28736
MPVR28696
VTVT71966
CHVR28735
VTVR00340
MPVR28737
PMVR02551
CEVR00053
PMVR02551
MPVR09725
TANK EUROPA
PIPE UNION R155 BLACK C/PUL.GR-IPC
GASKET D.38
GASKET R 205 BLACK
DEFLECTOR 99
SCREW PAT TMT PHL 5X30 BLACK
COMPLETE PLASTIC HOOK BLACK
RIVET 5X24,5
BLACK HANDLE
COMPL.SEAL JOI. W/SCREW L=3
HINGE PLASTIC TANK 400/S
COMPL.SEAL JOI. W/SCREW L=3
SHOCKPROOF BAND 400 GREEN IPC
400 BASC. NERO
1,00
1,00
1,00
1,00
1,00
4,00
2,00
4,00
1,00
2,00
1,00
4,00
1,00
WetDryOpMan082113-A
Cart Assembly GP 172
No. Part# Description Qty.
0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0011
0012
0013
0014
0015
0016
0017
0018
0019
0020
0021
0022
MLML00371
KTRI03762
MPVR06378
VTVT72207
MPVR09684
MPVR09685
LAFN08318
MPVR06710
MPVR85070
KTRI03721
RTRT85069
KTRI03762
MPVR28773
LAFN08319
VTVT71966
MPVR28774
VTVT71971
VTRS72158
KTRI03765
KTRI03437
KTRI03722
MPVR02277
SPRING PLASTIC DRUM 400 PLASTIC
SPACER MARK.PLAST.
WHEEL
HINGE PIN 400 PLASTIC
SCREW PAT TMT
TUBE BLOCK RIGHT
TUBE BLOCK LEFT
UP-AND-OVER
PLAS.BIG HANDLE GREY 6000
WHEEL CAP
BLOC. D.18
REAR WHEEL
WHEEL SPACER MARK.PLAST.
SPACER BUSH
WHEEL PIN D.18X505 SP.1,5 ZN.
SCREW PAT TMT PHL 5X30 BLACK
LOCK PIVOT BRACKET
SCREW PAT TMT PHL 5X35 BLACK
PLAST.WASHER
SCREW PAT TMT
SCREW PFU TMT
FLANGED WHEEL D.80
TROLLEY BODY EUROPA BASC. GR6000
PHL 5X25 BLACK
PIN DIA.18X465 SP.1,5 ZN.
D.200/250 BLACK
D.200
PHL 5X40 BLACK
PHL 5X20 BLACK
2,00
2,00
2,00
4,00
1,00
1,00
1,00
1,00
2,00
2,00
2,00
2,00
2,00
1,00
8,00
2,00
2,00
6,00
8,00
2,00
1,00
WetDryOpMan082113-A
Tools
4
1
3
8
2
5
6
Item Part# Description Qty
S72672 Complete Tool Kit 1
1 S70003 Crevice Tool 1
2 S76295 Round Brush 1
3 S70008 Hose 1
4 S76387 Wand, Straight 2
5 S76389 Wand, Curved 1
6 S76384 16” Floor Brush 1
7 S76385 16” Floor Squeegee 1
7a S82333 Replacement Squeegee Blades 2
1 S76388 Adapter 1
7
Not shown: Adaptor 2” Tank inlet to 1.5” raw hose—Used on 3 motor models due to 2” tank inlet
WetDryOpMan082113-A
Filters
Part# Description Where Used
S82860 Filter Bag, Standard Polyester 315 models
S82845 Filter Bag, Standard Polyester 415/429/430 models
S83742* Cartridge Filter, Paper 315 models
S73742* Cartridge Filter, Polyester 315 models
S82881* Cartridge Filter, HEPA Equivalent 315 models
S82852* Cartridge Filter, Paper 415/429/430 models
S76061* Cartridge Filter, Polyester 415/429/430 models
S82995* Cartridge Filter, HEPA Equivalent 415/429/430 models
S82855 Cartridge Filter Retainer all models
T80092 Paper Filter Bags 5/pkg. 315 models
T80093 Paper Filter Bags 3/pkg. 415/429/430 models
*also requires S82855 Retainer
Recommended Spare Parts
S8TOEG845 Motor Carbon Brush
S80326 Main Power Switch
S82860 Polyester Filter, 315
S82845 Polyester Filter, 415/429/430
WetDryOpMan082113-A
S70042 22” Front-Mounted Squeegee fits all 415/429/430 models
No. Part# Description Qty.
1 S82164 Handwheel 8x45 1
2 S82187 Small Block, Fixed 1
3 S82163 Handwheel 6x25 1
4 S83115 Plate, Adjustment 1
5 S82189 Driver Pivot 1
6 S81033 Nut M8 2
7 S81732 Adjustment Knob 2
8 S86137 Spring 2
9 S82245 Squeegee, Rear 1
10 S86138 Wheel 2
11 S81034 Washer M8 1
12 S82177 Body, Wet Fix Tool 1
13 S82198 Spacer 2
14 S82196 Squeegee, Front 1
15 S82197 Bracket, Squeegee 2
16 S81856 Screw M4x16 16
17 S80010 Hose 1
18 S82297 Mounting Bracket 1
19 S81035 Nut M5 4
20 S81036 Washer M5 4
21 S81755 Screw 5x16 4
22 S81006 Screw 5x20 4
WetDryOpMan082113-A
T80184 30” Front-Mounted Squeegee fits 415/429/430 models with Polyethylene Tanks
12
11
4
4
10
9
12
13
8
7
6
15
5
4
14
16
17
19
18
3
2
1
No. Part# Description Qty.
1 BD735602 Blade, Slotted 2
2 BD735601 Blade, Solid 2
3 BD7015509 Support, Blade 2
4 BD41000 Nut, Nylock 1/4-20 4
5 BD715508 Housing Assy. 1
6 BD41000 Nut, Nylock 1/4-20 2
7 BD735607 Wheel, Guide 2
8 BD735608 Bolt, 1/4-20 x 1.75” 2
9 BD725520 Lifting Arm RH 1
10 BD705202 Cross Member 1
11 BD705203 Latch Assy. 1
12 BD40505 Bolt, 1/4-20 x 1” 2
13 BD725521 Lifting Arm, RH 1
14 T80021 Hose Assy. 1
15 BD408000 Screw, 10, 32x625L 18
16 BD735620 Clevis Pin, Front Wheel 1
17 BD735617 Front Guide Wheel, 2” Dia 1
18 BD735619 Hitch Pin, Front Wheel 1
19 BD735618 Hand knob, Front Mount 2
WetDryOpMan082113-A
IPC Eagle
3650 Dodd Rd | Eagan, MN 55123
(651) 686-5399 | FAX (651) 686-5695
www.ipceagle.com
Warranty Policy
Limited Warranty
IPC Eagle warrants new cleaning equipment against defects in material and workmanship under normal use
and service to the original purchaser as detailed below.
10 years
Subject to the conditions stated below, IPC Eagle warrants polyethylene tanks and housings to be free from
defects in materials and workmanship for a period of ten years.
3 years
Subject to the conditions stated below, IPC Eagle warrants all automatic scrubber components to be free from
defects in materials and workmanship for a 3-year period. Parts replaced or repaired are warranted for the
remainder of the original warranty period.
1 year
Subject to the conditions stated below, IPC Eagle warrants all other cleaning equipment components to be free
from defects in materials and workmanship for a 1-year period. Parts replaced or repaired are warranted for the
remainder of the original warranty period. Batteries are pro-rated for one year.
IPC Eagle will furnish and charge for replacement parts, including transportation, to the original owner through
an IPC Eagle authorized service center. If the part is returned within 30 days and is found defective, the owner
will be credited for the cost of the replacement part including shipping and handling.
Labor charges are covered for one year from the date of purchase if provided by an authorized IPC Eagle service
center. Travel is covered for 90 days for battery operated equipment only.
Wear items exempt from warranty include but not limited to belts, carbon brushes, power cords, wheels, pad
drivers, clutch plates, brushes, pads, handle grips, filters, screens, throttle cables, hoses, auto-scrubber squeegee
blades, nozzles, guns, wands, quick couplers, seals, gaskets, o-rings, pistons, packings, valves, fuses and pump
protectors.
This warranty shall not apply to failures caused by misuse or abuse, improper maintenance as stated in the
operation manuals, use of unauthorized repair parts, repairs by other than an IPC Eagle authorized service
center, and damage in transit.
IPC Eagle disclaims and denies any liability for any direct, indirect, special incidental or consequential damage
which may be suffered as a result of sale, delivery, servicing, use, loss of any product, downtime, labor, freight,
or other charges not expressly included herein.
Hand-Held Manual Tools
All hand-held, manual tools are warranted for 90-days for manufacturer defects.
WetDryOpMan082113-A
ċĎčĈ*!!!ĶĴ$,ķččĉĊċ
ĎčĉĶĎĐĎĶčċđđĴ5ĎčĉĶĎĐĎĶčĎđčĴ
ĐĈĈĶČĐĎĶĊďďč444Ķ&- "$)"Ķ *+
WetDryOpMan082113-A
Loading...