Iotton Splendid Sound iQute M3 User Manual

iQute

User Guide

Model: iQute M3

True wirwless stereo

earbuds

1)

Welcome

Thank you for purchasing our iQute wire­less earbuds from Iotton Co. Ltd., and join
our pursue for the best wireless music
experience. We hope you will enjoy using
these earbuds as much as we enjoy de­signing and crafting them. Welcome to
the world of Splendid Sound!

2)

What’s In The Box

L

Earbuds

Charging case

( with backup battery inside)

R

Small Medium

Earbud tips

USB charging cable

3)

Product overview

Multifunction button

LED indicator light

Charging case

Earbud charging
status indicator

Battery level

indicator

USB socket

Volume +/-

4)

Turn On And Pairing The Earbuds

1) Turn on and pairing the earbuds while
they are outside of the charging case.

Pressing and hold the multifunctional
button on both left & right earbuds until you
see the indicator LED are flashing red and
blue alternatively, then release the fingers.
After a short wait, you will observe the indi­cator LED on the right earbud turn into slow
flashing blue light mode, while the indicator
LED on the left earbud continue to flash
blue and red alternatively, this means that
the right earbud is paired to the left
earbud, and the left earbud is trying to
paired up to the phone. After another short
wait, if this pair of earbuds has been paired
to the phone before, the left earbud will
quickly re-connect to the phone and com­pletes the pairing procedure. At this time,
the indicator LED on both earbuds will be in
slow flashing blue light state (every 10 sec­onds); If the earbuds have not been paired
to the phone before, following these steps
below on the phone to complete the pair-

ing procedure.

i)

On the smart phone, go to the “Settings”
screen, turn on “Bluetooth” service.

ii) Under “Other devices”, find and select

“Splendid Sound iQute”, If you phone (or
other equipment such as a MAC Book) asks
the pass code, enter 0000 (four zeros) and
accept the connection.
Observe that the “Splendid Sound iQute”
become “connected”, and you should see
the indicator LED on both earbuds will be in
slow flashing blue light state (every 10 sec­onds)