IOR STPS30L30CGPbF User Manual
Bulletin PD-21050 rev. A 06/06
Base
A
STPS30L30CGPbF
SCHOTTKY RECTIFIER
Major Ratings and Characteristics
Characteristics Values Units
I
Rectangular 2 x 15 A
F(AV)
waveform
V
RRM
VF@ 15 Apk, TJ = 125°C 0.37 V
(Per Leg)
TJrange - 55 to 150 °C
30 V
Description/ Features
This center tap Schottky rectifier has been optimized for very
low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to
150° C junction temperature. Typical applications are in
switching power supplies, converters, free-wheeling diodes,
and reverse battery protection.
150° C TJ operation
Center tap configuration
Very low forward voltage drop
High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
Lead-Free ("PbF" suffix)
Case Styles
I
= 30 Amp
F(AV)
VR = 30V
30 Amp
Common
Cathode
2
2
1
Common
3
Cathode
node
Anode
D2PAK
www.irf.com
1
STPS30L30CGPbF
Bulletin PD-21050 rev. A 06/06
Voltage Ratings
Parameters STPS30L30CGPbF
V
Max. DC Reverse Voltage (V) 30
R
V
Max. Working Peak Reverse Voltage (V)
RWM
Absolute Maximum Ratings
Parameters Values Units Conditions
I
Max. Average Forward Per Device 30 A 50% duty cycle @ TC = 140°C, rectangular wave form
F(AV)
Current Per Leg 15
I
Max. Peak One Cycle Non-Repetitive 1450 A 5μs Sine or 3μs Rect. pulse
FSM
Surge Current 220 10ms Sine or 6ms Rect. pulse
EASNon-Repetitive Avalanche Energy 15 mJ T
= 25 °C, I
J
= 2 Amps, L = 7.5 mH
AS
(Per Leg)
IARRepetitive Avalanche Current 2 A Current decaying linearly to zero in 1 μsec
(Per Leg) Frequency limited by TJ max. VA = 1.5 x VR typical
Following any rated
load condition and
with rated V
RRM
Electrical Specifications
Parameters Values Units Conditions
VFMMax. Forward Voltage Drop 0.46 V @ 15A
(Per Leg) (1) 0.57 V @ 30A
0.37 V @ 15A
0.50 V @ 30A
IRMMax. Reverse Leakage Current 1.50 mA TJ = 25 °C
(Per Leg) 350 mA TJ = 125 °C
C TMax. Junction Capacitance(Per Leg) 1500 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C
LSTypical Series Inductance (Per Leg) 8.0 nH Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change 10000 V/μs (Rated VR)
TJ = 25 °C
TJ = 125 °C
VR = rated V
(1) Pulse Width < 300μs, Duty Cycle <2%
R
applied
Thermal-Mechanical Specifications
Parameters Values Units Conditions
TJMax. Junction Temperature Range -55 to 150 °C
T
Max. Storage Temperature Range -55 to 150 °C
stg
R
Max. Thermal Resistance Junction 1.5 °C/W DC operation
thJC
to Case (Per Leg)
R
Max. Thermal Resistance Junction 0.8 °C/W DC operation
thJC
to Case (Per Package)
wt Approximate Weight 2 (0.07) g (oz.)
T Mounting Torque Min. 6 (5)
Max. 12 (10)
Marking Device STPS30L30CG Case style D2Pak
2
Kg-cm
(Ibf-in)
www.irf.com
(mA)
1000
0 5 10 15 20 25 30
100
1000
10000
0 5 10 15 20 25 30 35
T = 25˚C
J
0.01
0.1
1
10
0.00001 0.0001 0.001 0.01 0.1 1 10
Single Pulse
(Thermal Resistance)
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
Notes:
1. Duty factor D = t1/ t 2
2. Peak Tj = Pdmx ZthJC + Tc
2
t
1
t
P
DM
1000
.6
R
STPS30L30CGPbF
Bulletin PD-21050 rev. A 06/06
T = 150˚C
100
10
J
125˚C
100˚C
75˚C
100
(A)
F
T = 150˚C
10
Instantaneous Forward Current - I
1
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1
J
T = 125˚C
J
T = 25˚C
J
Forward Voltage Drop - VFM (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
1
0.1
Reverse Current - I
0.01
Reverse Voltage - VR (V)
Fig. 2 - Typical Values of Reverse Current
Vs. Reverse Voltage
( p F)
T
Junction Capacitance - C
Reverse Voltage - VR (V)
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage
50˚C
25˚C
(°C/W)
thJC
Thermal Impedance Z
www.irf.com
t1, Rectangular Pulse Duration (Seconds)
Fig. 4 - Max. Thermal Impedance Z
Characteristics
thJC
3
Loading...