Ionic Pro TURBO User Manual

Download

Page 1

Owner’s Guide

Page 2

TABLE OF CONTENTS

PRODUCT BENEFITS > 02

SAFETY INSTRUCTIONS > 02

Thank you for purchasing

the Ionic Pro Turbo® ionic air

purier and congratulations

on taki ng this i mpor tant

step in improving the quality

of air in your home, ofce or

other indoor environments.

Customer satisfaction is our

number one goal. Ionic

Pro Turbo® ionic air purier

is a premium air purifying

appliance which comes with

a limited one-year warranty.

Enjoy your Ionic Pro

ionic air purier and visit

our website for more exciting

quality products and upgrades

at www.ionicpro.com.

Turbo®

IMPORTANT WARNINGS > 04

Main Parts

OPERATING THE IONIC PRO TURBO® IONIC AIR PURIFIER > 0 6

Getting Ready Controls/Settings Selecting Settings

CLEANING & MAINTENANCE > 08

To Clean the Collection Blades To Clean the Oxygen Plus™ Filter To Clean the Internal Ionizing Wires

DEEP CLEANING > 10

TROUBLE-SHOOTING > 11

MORE THINGS YOU SHOULD KNOW > 12

Ozone and Your Health

ORDERING IONIC PRO® IONIC AIR PURIFIERS > 12

ORDERING EXTRA COLLECTION BLADES > 12

WARRANTY > 13

ARBITRATION AGREEMENT > 14

Page 3

prOduCT BENEFiTS

SAFETy iNSTruCTiONS

IONIC PRO TURBO® IONIC AIR PURIFIER PRODUCT BENEFITS

Your Ionic Pro Turbo® ionic air purier delivers all these wonderful benets:

> 300% more effective than the competition*. > Oxygen Plus™ technology turns ozone and smog into pure oxygen > Patent-pending germicidal chamber kills bacteria and germs on contact > Totally silent > No lters to replace > Easy to use > Easy to clean > Energy-efcient

Breathe even easier when you order additional Ionic Pro fresh and puried air in every room of your home everyday. See our “Ordering Ionic Pro

Air Purier products today to enjoy

Air

Puriers” section in this owner’s guide for details.

SAFETy iNSTruCTiONS

EXTREMELY IMPORTANT INFORMATION:

Safety precautions should always be used when operating this or any electrical appliance. Decrease the risk of electrocution, electric shock, injury or re by reading and following all the warnings below:

Use only as described in this Ionic Pro

To reduce the risk of electric shock, do not attempt to service the product in any way other than in the manner described in the “CLEANING & MAINTENANCE” section of this owner’s manual.

Do not use the Ionic Pro

Turbo® ionic air purier outdoors.

Turbo® ionic air purier in bathrooms or other humid environments, near

replaces or in areas where ammable or combustible vapors or products may exist.

The Ionic Pro

Turbo® ionic air purier operates at 120v AC and 60Hz only.

To reduce the risk of electric shock, this product has a grounding-type plug that has a third grounding pin. This plug will t only into a grounding-type power outlet. If the plug does not t into the outlet, contact qualied service personnel to install the proper outlet. Do not alter the plug in any way.

Always turn off all controls before unplugging the Ionic Pro

Always turn off and unplug this product from outlet before cleaning the collection blades.

Always turn this product off when not in use.

Turbo® ionic air purier owner’s manual.

Turbo® ionic air purier from outlet.

Never touch the internal collection blades, electrodes, ionizing wires, or any part of the Ionic Pro

Turbo® ionic air

purier with any object capable of conducting electricity.

Do not open the main door of the Ionic Pro

Turbo® ionic air

purier when it is in operation.

Attempting to dissemble the unit will cause the warranty to be voided and could cause serious personal injury to the user and/or result in considerable damage to the unit.

Do not place the Ionic Pro

Turbo® ionic air purier’s cord

near a heated surface.

Never operate the Ionic Pro

Turbo® ionic air purier if the plug or cord is damaged or appears damaged. Only qualied service personnel should ever replace or attempt to replace a damaged power cord.

Never use the power cord to pick up, carry, drag, pull, or lift the Ionic Pro

Turbo® ionic air purier. Do not pull the cord against or around sharp corners and edges. This could result in injury to the user or damage to the cord and is prohibited.

Always remove the plug from its power outlet by holding onto the plug itself and pulling gently. Never pull on the cord itself to unplug it from its power outlet.

Use care when operating the Ionic Pro

Turbo® ionic air purier by keeping all ngers, body parts, hair,

loose clothing and jewelry away from openings.

Never touch the Ionic Pro

Never try to insert any object into the body of the Ionic Pro

Turbo® ionic air purier or its plug when your hands are wet.

Turbo® ionic air purier when

it is in operation.

The Ionic Pro when operating the Ionic Pro

Turbo® ionic air purier is an electrical appliance. Adult supervision is required

Turbo® ionic air purier in the presence of children.

Do not touch the metal blades until after discharging residual electricity by touching blades to an electrical ground such as a water pipe or metal faucet.

The collection blades should be inspected frequently and cleaned regularly to prevent excessive accumulation that may result in an electrical ashover or a risk of re.

*It w o u l d ta k e 3 o f t h e o r I g I n a l Io n I c Br e e z e ® Qu a d r a ® (SI837 ) t o B e a S e f f e c t I v e a S o n e Io n I c Pr o tu r B o ® B a S e d o n c adr m e a S u r e m e n t S a S

d e f I n e d B y a nSI S t a n d a r d . Io n I c Br e e z e ® a n d Qu a d r a ® a r e r e g I S t e r e d t r a d e m a r k S o f th e Sh a r P e r Im a g e co r P o r a t I o n . th e Io n I c Pr o tu r B o P r o d u c t IS n o t a S S o c I a t e d w I t h th e Sh a r P e r I m a g e co r P o r a t I o n .

Page 4

iMpOrTANT WArNiNGS iMpOrTANT WArNiNGS

IMPORTANT WARNINGS

Before using your Ionic Pro Turbo® ionic air purier, please read the following important information.

MAIN PARTS

First, please look at the “Main Parts” diagram and locate the part labeled A.

These are the collection blades and are a vital part of this amazing ionic air purifying system. The collection blades are where unhealthy pollutants, allergens, irritants and odors are trapped when the Ionic Pro

READ THIS: Do not touch the metal collection blades, even when you take the collection blade unit out for cleaning. (See “CLEANING & MAINTENANCE” section of this manual.)

Main Parts

A. COLLECTION BLADES B. OPEN BUTTON C. CONTROL PANEL D. OUTER HOUSING E. MAIN DOOR F. POWER CORD G. BASE

Turbo® Ionic Air Purier is in proper working condition and in use.

To keep your Ionic Pro collection blades after every month of use and the internal ionizing wires at the same time. (See

“CLEANING & MAINTENANCE” section of this owner’s manual for the proper techniques.)

WARNING: After cleaning the collection blades with soap and water, allow at least 24 hours for the collection blades to dry thoroughly before re-inserting into the unit. (See “CLEANING AND MAINTENANCE” section.) Water can easily get trapped along the collection blades’ many surfaces and edges and damage could result if there is any moisture on the collection blades.

You will need to clean your Ionic Pro to heavy pollution.

Do not place the Ionic Pro use, chimney dust and soot may circulate through the Ionic Pro re-circulate and leave a residue on the unit and surrounding areas. We recommend that you do not place your Ionic Pro or oil lamps near your Ionic Pro wicks are cut to no more than a quarter inch to cut down on smoke production.

Turbo® ionic air purier working properly, it will be necessary to clean the

Turbo® ionic air purier more often if it has been exposed

Turbo® ionic air purier near a replace. Even if a replace is not in

Turbo® ionic air purier near candles or oil lamps. If you intend to use candles

Turbo® ionic air purier despite this warning, make sure that the

Turbo® ionic air purier and then

ENSURING QUIET OPERATION

The Ionic Pro effort to maintain in proper working condition. If you hear excessive noise or static coming from your Ionic Pro your Ionic Pro

Turbo® ionic air purier is designed to run quietly and requires very little time and

Turbo® ionic air purier, it generally indicates that the product needs to be cleaned. Turn off

Turbo® ionic air purier, unplug the cord and carefully follow the cleaning instructions

in this manual.

4 5

Page 5

OpErATiNG THE iONiC prO TurBO® Air puriFiEr

Getting Ready

Locate a level surface on which to place Ionic Pro outlet. (Follow warnings described in the “SAFETY INSTRUCTIONS” section of this manual.) Position your Ionic Pro

Turbo® ionic air purier at least one foot (12 inches) from the wall. Plug in the unit.

You are now ready to turn on your Ionic Pro

Turbo® ionic air purier and a grounded 120v

Turbo® ionic air purier!

1. ON/OFF Button

A LOW –output indication light (LOW) B MEDIUM –output indication light (MED) C HIGH –output indication light (HI) D CLEAN –indication light (CLEAN)

2. CLEAN –wire cleaning mechanism

3. OPEN –main door button

4. CLEAN –Indication light

Controls/Settings

1. ON/OFF BUTTON Turns unit on and off.

A LOW –This is the most cost-effective setting. Ideal for medium sized rooms, where windows & doors rarely open. B MED –Recommended for medium to large-sized rooms. C HI –This maximum output setting is recommended for medium to large rooms and/or areas exposed to heavy dust. D CLEAN –This red light goes on when your Ionic Pro

Turbo® ionic air purier needs to be cleaned, or the unit is experiencing some other problem. See “TROUBLE-SHOOTING” section.

Selecting Settings

1. Set up the Ionic Pro

Turbo® ionic air purier as

described in “Getting Ready”.

2. Press the ON/OFF button to activate your ionic air purier and get ready to enjoy clean, ionized air.

3. The Ionic Pro

Turbo® ionic air purier automatically defaults to the HI (high/maximum output) setting whenever the unit is turned on.

4. Just press the ON/OFF button one more time to select the MED (medium) output setting and press the ON/OFF button once again if you wish to select the LOW output setting.

5. Press the ON/OFF button a fourth time to turn the unit off.

6. The indicator LEDs light up to indicate your current setting (LOW, MED, HI).

Clean Light:

The red CLEAN light will turn on and the unit will shut down if cleaning is overdue or AC input is unstable. The Ionic Pro

Turbo® ionic air purier’s collection blades must be cleaned after every month of use and the internal ionizing wires must be cleaned at the same time. (See “CLEANING & MAINTENANCE” for full directions.) Once the collection blades are properly cleaned, normal operation should resume.

Page 6

CLEANiNG & MAiNTENANCE

With very little effort, the Ionic Pro Turbo® ionic air purier delivers cleaner, fresher, healthier air to your indoor environments. Keep your Ionic Pro cleaning the collection blades after every month of use as recommended. The internal ionizing wires are an important part of the Ionic Pro

Turbo® ionic air purifying system and need to be cleaned at

Turbo® ionic air purier functioning properly by

the same time or whenever you hear excessive noise. (See “TO CLEAN IONIZING WIRES” and “DEEP CLEANING”sections.)

More frequent cleaning may be required if your Ionic Pro place it in a different location. Exposing your Ionic Pro

Turbo® ionic air purier is new or if you

Turbo® ionic air purier to candle/oil lamp/ replace soot and smoke is not recommended and will require the collection blades to be cleaned after every exposure. (See “IMPORTANT WARNINGS”.)

HELPFUL TIPS: Remember to clean your Ionic Pro

Turbo® ionic air purier every month and anytime the red CLEAN/FAULT light comes on or whenever you hear your unit begin to make excessive noise.

To Clean the Collection Blades:

1. Turn off and unplug your Ionic Pro

Turbo®

ionic air purier.

2. Let the unit rest a minute before attempting to remove the collection blades.

3. Pull upward on the release latch of the collection blade unit and pull out from the main door.

4. Remove the collection blade unit.

5. Do not touch the metal blades until after discharging residual electricity by touching blades to an electrical ground such as a water pipe or metal faucet.

6. Wipe away the trapped particles collected on the three blades with a slightly damp sponge or cloth.

7. IMPORTANT: To avoid damaging your Ionic Pro are completely dry and free of all moisture and that your Ionic Pro

Turbo® ionic air purier, make sure the blades

Turbo® ionic air purier is turned off before re-insertion. If you used a slightly damp cloth to clean the blades, it is possible the collection blades will be completely dry within two to three hours.

To Clean the Oxygen Plus™ lter:

1. Turn off and unplug your Ionic Pro

Turbo® ionic air purier.

2. Open the main door and remove the collection blades, the Oxygen Plus™ lter is located inside the main door.

3. Put the hose attachment of your vacuum near the Oxygen Plus™ lter and make sure to clean without touching the Oxygen Plus™ lter.

To Clean the Internal Ionizing Wires:

There is an internal wire cleaner that cleans the internal ionizing wires by sliding up and down to scrape off particle residue.

1. Gently pull the lever up and down several times.

2. The internal ionizing wires need to be cleaned after every two weeks of use.

READ THIS: To avoid damage, please make sure that all surfaces and edges of the collection blades are thoroughly dry before re-inserting them into your Ionic Pro ionic air purier.

Turbo®

Page 7

CLEANiNG & MAiNTENANCE

DEEP CLEANING

Noisy functioning (audible loud buzzing sound) is a sign that your Ionic Pro

Turbo® ionic air purier is overdue for a complete clean-up of the collection blades and the internal ionizing wires. The internal ionizing wires must be kept clean to ensure silent and normal operation.

To Deep Clean:

1. Before beginning, make sure you have read all of the safety precautions and cleaning instructions located in the “SAFETY

INSTRUCTION”, “IMPORTANT WARNINGS”, and “CLEANING & MAINTENANCE” sections of this owner’s manual.

2. First, turn OFF and unplug your Ionic Pro

3. Let it rest for a minute before sliding out the collection blades as described in the “To Clean the Collection Blades” section of this manual.

4. Use a cloth and warm, sudsy water to wipe away dirt particles on the blades’ surfaces and edges.

5. Rinse and let the blades dry thoroughly for 24 hours before re-inserting them into your Ionic Pro If desired, you can purchase a second set of collection blades to use while the original blades are drying to allow for virtually uninterrupted air purication. (See the “ORDERING EXTRA

COLLECTION BLADES” section of this owner’s manual for details.)

Cleaning External Surfaces

Over time, some particles and dust may accumulate on the external surfaces of your Ionic Pro

Turbo® ionic air purier.

TrOuBLE SHOOTiNG

TROUBLE REASON TROUBLE-SHOOTING

Indication/Setting light does not turn on.

Red CLEAN light is on or the unit shuts down.

Excessive noise generated.

Machine is unplugged.

ON/OFF button has not been pressed.

Main door not closed.

Too much dust has accumulated.

AC input unstable or overloaded.

Moisture on collection blades.

Collection blades are not installed properly.

Too much dust has accumulated.

Check if plug is loose.

Press the ON/OFF button.

Close door.

Turn off, unplug & lift the lever to the wire cleaning mechanism to clean the ionizing wires.

Turn off, allow unit to rest a while to return to normal.

Temperature & moisture level and then turn on again.

Remove & replace collection blades & press “On” button.

Clean and dry blades and ionizing wires thoroughly.*

If this happens:

1. Turn off and unplug the unit.

2. Mix one ounce of soap or detergent with ve ounces of water and apply sparingly with a moist sponge to wipe the outer case surfaces.

3. Do not allow any water to slip into the internal parts of the Ionic

Pro may result in injury to you.

4. Allow the unit to dry for at least 24 hours before resuming use.

Turbo ionic air purier as this could damage its functioning and

Internal parts are wet.

*See “CLEANING & MAINTENANCE” section.

Keep the machine dry.

10 11

Page 8

MOrE THiNGS yOu SHOuLd KNOW

LiMiTEd WArrANTy

Ozone and Your Health

After you activate your Ionic Pro

Turbo® ionic air purier, you may notice a new clean scent.

Ozone is the scent you smell. Ozone is a combination of three oxygen atoms.

The Ionic Pro ozone emission. The Ionic Pro

Turbo® ionic air purifying system utilizes an ionizing process which results in very low

Turbo® ionic air purier complies with U.S. safety requirements for low ozone emission (less than 50 parts per billion) and meets the UL867 standard for consumer products. UL867 is the U.L. standard for safety for electro-static air cleaners.

Individuals with a history of respiratory disease, asthma, heart disease, lung disease, breathing problems or concerns about ozone should ask their doctor whether the concentrations of ozone generated by this or other commercial ionic air puriers are appropriate for their specic health needs.

ORDERING IONIC PRO® IONIC AIR PURIFIERS

There’s no such thing as too much clean air. Breathe even easier when you order additional Ionic

Pro

air purier products today to enjoy fresh and puried air in every room of your home

every day. Visit our website at www.ionicpro.com or call 1.800.875.8577 to order your new Ionic

Pro

air puriers today and to nd out about our entire line of exciting products.

ORDERING EXTRA COLLECTION BLADES

Enjoy virtually uninterrupted air purication by ordering an extra set of collection blades today. This is a great way to make sure you can always have a clean and thoroughly dry set of collection blades available to insert into your Ionic Pro are being cleaned and dried for 24 hours. Visit our website at www.ionicpro.com or call

1.800.875.8577 to order your new collection blades today.

Turbo® ionic air purier whenever the other blades

ONE YEAR LIMITED WARRANTY

Your Ionic Pro

Turbo® ionic air purier is warranted to be free from defects in materials and workmanship for one year from the original purchase date. Should the product have a defect in materials or workmanship, we will repair or replace it without charge to you (a shipping and processing fee may apply). To obtain service under warranty, simply call our Customer Service Center toll-free at

1.800.875.8577.

This warranty does not cover damage caused by accident, misuse or any use other than as intended and described in this product manual, or damage resulting from failure to maintain and clean this product as specied in this product manual. This warranty applies only to the original purchaser of the Ionic Pro

Turbo®

ionic air purier.

Contact Info for Warranty Service:

Ionic Pro P.O. Box 4134 | Los Angeles, CA | 90048

1.800.875.8577 | www.ionicpro.com

200420006826.0. European Registered Design No. 616867-0001. Hong Kong Patent Nos. HK 1063973 and 6105471.1. Additional patents pending worldwide.

12 13

Page 9

ArBiTrATiON AGrEEMENT

THIS ARBITRATION AGREEMENT (THE “AGREEMENT”) AFFECTS YOUR LEGAL RIGHTS AND REMEDIES BY PROVIDING THAT DISPUTES BETWEEN YOU AND THE SELLER OF THIS PRODUCT (“COMPANY”), MUST BE RESOLVED THROUGH BINDING ARBITRATION, RATHER THAN IN A COURT. PLEASE READ THIS AGREEMENT CAREFULLY. YOU ACCEPT THE TERMS OF THIS AGREEMENT BY RETAINING THE PRODUCT(S) SHIPPED IN CONNECTION WITH THIS AGREEMENT (THE “PRODUCT”) FOR MORE THAN FOURTEEN (14) DAYS AFTER RECEIPT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, YOU MAY RETURN THE PRODUCT TO COMPANY WITHIN FOURTEEN (14) DAYS OF RECEIPT AT NO COST TO YOU.

1. RESOLUTION OF CLAIMS OR DISPUTES. Any claim or dispute between you and Company (or any of Company’s

subsidiaries or afliates) arising out of or relating in any way to the Product or this Agreement shall be resolved through nal, binding arbitration. This arbitration obligation applies regardless of whether the claim or dispute involves a tort, fraud, misrepresentation, product liability, negligence, violation of a statute, or any other legal theory. Both you and Company specically acknowledge and agree that you waive your right to bring a lawsuit based on such claims or disputes and to have such lawsuit resolved by a judge or jury.

2. LIMITATION OF LEGAL REMEDIES. All arbitrations under this Agreement shall be conducted on an individual (and not a class-wide) basis, and an arbitrator shall have no authority to award class-wide relief. You acknowledge and agree that this Agreement specically prohibits you from commencing arbitration proceedings as a representative of others or joining in any arbitration proceedings brought by any other person.

3. ARBITRATION PROCEDURES.

a. Before commencing any arbitration proceedings under this Agreement, you must rst present the claim or dispute to Company by calling 818-217-2500 and asking for the Legal Department and allowing Company the opportunity to resolve the claim or dispute. If your claim or dispute is not resolved within sixty (60) days, you may commence arbitration proceedings in accordance with the terms of this Agreement.

b. The arbitration of any claim or dispute under this Agreement shall be conducted pursuant to the American Arbitration Association’s (“AAA”) United States Commercial Dispute Resolution Procedures and Supplementary Procedures for Consumer-Related Disputes. These rules and procedures are available by calling the AAA or by visiting its web site at www.adr.org.

NOTES

c. The arbitration of any claim or dispute under this Agreement shall be conducted in the State of California or the location in which you received this Agreement.

d. All administrative expenses of arbitration proceedings commenced under this Agreement shall be divided equally between you and Company, except that: (a) if the claim or dispute that is the subject of the arbitration proceedings is less than ten thousand dollars (US$10,000), you will be responsible for no more than one hundred twenty-ve dollars (US$125) in administrative expenses; (b) if the claim or dispute that is the subject of the arbitration proceedings is more than ten thousand dollars (US$10,000) but less than seventy-ve thousand dollars (US$75,000), you will be responsible for no more than three hundred seventy-ve dollars (US$375) in administrative expenses; and (c) if the claim or dispute that is the subject of the arbitration proceedings is more than seventy-ve thousand dollars (US$75,000), then you will be responsible for administrative expenses in accordance with the Commercial Fee Schedule provided by the AAA. You acknowledge and agree that each party shall pay the fees and costs of its own counsel, experts and witnesses.

4. CHOICE OF LAW. This Agreement shall be governed by the United States Federal Arbitration Act and the laws of the state of California.

5. SEVERABILITY. If any provision of this Agreement is declared or found to be unlawful, unenforceable or void, such provision will be ineffective only to the extent that it is found unlawful, unenforceable or void, and the remainder of the provision and all other provisions shall remain fully enforceable.

14 15

Page 10

NOTES NOTES

16 17

Page 11

TP6042808