Thank you for purchasing the Ionic Pro™ionic air purifier and
congratulations on taking this important step in improving the quality of
air in your home, office or other indoor environments. Customer
satisfaction is our number one goal. Your Ionic Pro™ionic air purifier
is a premium air purifying appliance which comes with a full
one-year warranty.
Enjoy your Ionic Pro™ionic air purifier and visit our website for more
exciting quality products and upgrades at www.ionicpro.com.
Operating the Ionic Pro™Ionic Air Purifier6
Getting Ready6
Controls/Settings7
Operation8
Cleaning & Maintenance9
To Clean the Collection Blades10
To Clean the Internal Ionizing Wires12
Deep Cleaning12
Cleaning External Surfaces13
Trouble-Shooting14
More Things You Should Know15
Ozone and Your Health15
Ordering Extra Collection Blades15
Warranty16
Arbitration Agreement17
1
TABLE OF CONTENTS
Page 3
IPP_Manual_Revise_FNL.qxp 8/22/04 9:43 PM Page 4
SAFETY INSTRUCTIONS
EXTREMELY IMPORTANT INFORMATION: Safety precautions should always be
used when operating this or any electrical appliance. Decrease the risk of electrocution,
electric shock, injury or fire by reading and following all the warnings below:
❍
Use only as described in this Ionic Pro™ionic air purifier manual. To reduce the
risk of electric shock, do not attempt to service the product in any way
other than in the manner described in the Cleaning and Maintenance section
of this manual.
❍
Do not use the Ionic Pro™ionic air purifier outdoors.
❍
Do not open the outer casing of the Ionic Pro™ionic air purifier. Attempting
to open the unit will cause the warranty to be voided and could cause
serious personal injury to the user and/or result in considerable damage
to the unit.
❍
Do not place the Ionic Pro™ionic air purifier’s cord near a heated surface.
❍
Never operate the Ionic Pro™ionic air purifier if the plug or cord is damaged or
appears damaged. Only qualified service personnel should ever replace or attempt
to replace a damaged power cord.
❍
Do not use the Ionic Pro™ionic air purifier in bathrooms or other humid
environments, near fireplaces or in areas where flammable or combustible
vapors or products may exist.
❍
Ionic Pro™ionic air purifier operates at 120v AC and 60Hz only.
❍
To reduce the risk of electric shock, this product has a grounding-type plug that
has a third grounding pin. This plug will fit only into a grounding-type power
outlet. If the plug does not fit into the outlet, contact qualified service personnel
to install the proper outlet. Do not alter the plug in any way.
❍
Always turn off all controls before unplugging the Ionic Pro™ionic air purifier
from outlet.
❍
Always turn off and unplug this product from outlet before cleaning the
collection blades.
❍
Always turn off this product when not in use.
❍
Never touch the internal parts, such as electrodes, ionizing wires, or any internal
part within the Ionic Pro™ ionic air purifier with any object.
❍
Never use the power cord to pick up, carry, drag, pull, or lift the Ionic Pro™ionic
air purifier. Do not pull the cord against or around sharp corners and edges. This
could result in injury to the user or damage to the cord.
❍
Always remove the plug from its power outlet by holding onto the plug itself
and pulling gently.
❍
Never pull on the cord itself to unplug it from its power outlet.
❍
Use care when operating the Ionic Pro™ionic air purifier by keeping all fingers,
body parts, hair, loose clothing and jewelry away from openings.
❍
Never touch the Ionic Pro™ionic air purifier or its plug when your hands are wet.
❍
The Ionic Pro™ionic air purifier is an electrical appliance. Adult supervision
is required when operating the Ionic Pro
™
ionic air purifier in the presence
of children.
❍
Do not touch the metal blades until after discharging residual electricity by
touching blades to an electrical ground such as a water pipe or metal faucet.
❍
The collection blades should be inspected frequently and cleaned regularly
to prevent excessive accumulation that may result in an electrical flashover or
risk of fire.
2
SAFETY INSTRUCTIONS
3
SAFETY INSTRUCTIONS
Page 4
IPP_Manual_Revise_FNL.qxp 8/22/04 9:43 PM Page 6
IMPORTANT WARNINGS
Main Parts
Before using your Ionic Pro™ionic air
purifier, please read the following
important information.
First, please look at the “Main Parts”
diagram and locate the part labeled A.
These are the collection blades and
are a vital part of this amazing ionic air
purifying system.
The collection blades are where
unhealthy pollutants, allergens, irritants
and odors are trapped when the Ionic
™
Pro
working condition and in use.
The Ionic Pro
designed to run quietly and requires very
A. COLLECTION BLADES
TOP OF COLLECTION BLADES.
See A for view of
collection blades alone.
B. OPERATING PANEL
little time and effort to maintain in
proper working condition. If you hear
excessive noise or static coming from your
Ionic Pro
indicates that the product needs to be
cleaned. Turn off your Ionic Pro
purifier, unplug the cord and carefully
follow the cleaning instructions in the
“CLEANING & MAINTENANCE” section of
this manual.
If the product is still making excessive
noise after cleaning and thoroughly drying
the collection blades and horizontally
re-inserting them as described in the
“CLEANING & MAINTENANCE” section of
this manual, turn off and unplug the unit.
After you have turned off and unplugged
ionic air purifier is in proper
™
ionic air purifier is
™
ionic air purifier, it generally
™
ionic air
the unit, see Diagram B for the location
of the Wire Cleaning Mechanism. Lift and
C.
lower the Wire Cleaning Mechanism three
to four times to thoroughly clean the
internal ionizing wires (see Diagram G in
“CLEANING & MAINTENANCE” section).
the
This movement helps to scrape free particles
from the internal ionizing wires. To keep
™
your Ionic Pro
ionic air purifier working
properly, it will be necessary to clean the
collection blades after every four to five
days of use and the internal ionizing wires
after every eight to ten days of use
“CLEANING & MAINTENANCE” and
(see
“DEEP CLEANING” section of this manual
for the proper techniques).
WARNING: After cleaning the collection blades
(see “CLEANING AND MAINTENANCE” section) with
soap and water, allow at least 24 hours for the
collection blades to dry thoroughly before horizontally
inserting them back into the unit. See Diagram F in
“CLEANING AND MAINTENANCE” section for proper
horizontal insertion technique. Water can easily get trapped
along the collection blades’ many surfaces
and edges and damage could result if there is any
moisture on the collection blades. To allow for virtually
D.
E.
C. OUTER CASE HOUSING
D. AC CORD
E. BASE
Do not place Ionic Pro™ionic air purifier near a fireplace. Even if a fireplace is not in use, chimney dust and soot may
circulate through the Ionic Pro™ionic air purifier and then re-circulate and leave a residue on the unit and surrounding
areas. We recommend not placing the Ionic Pro™ionic air purifier anywhere near candles or oil lamps. If you intend to
use candles or oil lamps near the Ionic Pro™ionic air purifier despite this warning, make sure that the wicks are cut to
no more than a quarter inch to cut down on smoke production.
uninterrupted air purification, a second set of
collection blades may be purchased (kept clean and
in its box when not in use) and inserted into the Ionic Pro
ionic air purifier while the original collection
blades are drying.
You will need to clean your Ionic Pro™air purifier more
often if it has been exposed to heavy pollution.
™
4
IMPORTANT WARNINGS
5
IMPORTANT WARNINGS
Page 5
IPP_Manual_Revise_FNL.qxp 8/22/04 9:43 PM Page 8
OPERATING THE IONIC PRO
™
Getting Ready
Locate a level surface on which to place your Ionic Pro™ionic air purifier and a
grounded 120v outlet (follow warnings described in the
section of this manual). Position your Ionic Pro™ionic air purifier at least one foot
(12 inches) from the wall.
Plug in the unit.
3. MEDIUM OUTPUT
INDICATION LIGHT
You are now ready to turn on your Ionic Pro™ionic air purifier!
“SAFETY INSTRUCTIONS”
6. WIRE CLEANING
MECHANISM
4. HIGH OUTPUT
INDICATION LIGHT
Controls/Settings
1.ON/OFF BUTTONTurns unit on and off.
2.LORecommended for smaller rooms, this is the
(low output indication light)most cost-effective setting. At this setting, the
unit will experience longer rest intervals
than on the other two settings (MED or HI).
3.MEDRecommended for average-sized rooms where
(medium output indication light)windows and doors are rarely opened. At this
setting, the unit will experience shorter rest
intervals than when on the LO setting but
higher rest intervals than when on the HI
setting.
4.HIThis maximum output setting is recommended
(high output indication light)for large rooms and/or area exposed to heavy
dust.
2. LOW OUTPUT
INDICATION LIGHT
6
OPERATING THE IONIC PRO™IONIC AIR PURIFIER
1. ON/OFF BUTTON
5. CLEAN INDICATION
LIGHT
5.CLEANThis red light goes on when your
(indication light)Ionic Pro
™
ionic air purifier needs to be cleaned,
or the unit is experiencing some other
problem. See the
“CLEANING & MAINTENANCE”
and “TROUBLE-SHOOTING” sections.
6.WIRE CLEANING MECHANISMThis is used to clean the internal ionizing wires.
See
“CLEANING & MAINTENANCE” for full details.
HELPFUL TIPS: In general, LO is the most cost-effective setting and is recommended for smaller rooms. MED is
recommended for rarely opened average-sized rooms. HI delivers maximum output and is recommended for
larger rooms (the scent of ozone at this setting may be too strong for smaller rooms).
OPERATING THE IONIC PRO™IONIC AIR PURIFIER
7
Page 6
IPP_Manual_Revise_FNL.qxp 8/22/04 9:43 PM Page 10
CLEANING & MAINTENANCE:
Operation
Set up the Ionic Pro™ionic air purifier as described in “Getting Ready”. Press the
ON/OFF button to activate your ionic air purifier and get ready to enjoy clean,
ionized air that cycles through pre-programmed run/rest intervals according to the
setting you select.
™
The Ionic Pro
output) setting whenever the unit is turned on.
Just press the ON/OFF button one more time to select the MED (medium)
output setting to enjoy intermittent run/rest periods and press the ON/OFF
button once again if you wish to select the LO (low) output setting for the most
cost-effective run/rest cycle.
Press the ON/OFF button a fourth time to turn
the unit off.
The indicator LEDs light up to
indicate your current setting (LO, MED, HI).
Clean Light:
The red CLEAN light will turn on and the unit
will shut down if cleaning is overdue.
The Ionic Pro
blades must be cleaned after every four to five
days of use and the internal ionizing wires must
be cleaned after every eight to ten days of use (see
“CLEANING & MAINTENANCE” for full directions).
Once the collection blades are properly cleaned,
thoroughly dried and horizontally re-inserted
into your Ionic Pro
internal ionizing wires are properly cleaned,
normal operations should continue. If not, see
“DEEP CLEANING” and “TROUBLE-SHOOTING.”
ionic air purifier automatically defaults to the HI (high/maximum
™
ionic air purifier’s collection
™
ionic air purifier and the
With very little effort, the Ionic Pro™ionic air purifier delivers cleaner, fresher,
healthier air to your indoor environments.
™
Keep your Ionic Pro
ionic air purifier functioning properly by cleaning the
collection blades after every four to five days of use as recommended. The internal
ionizing wires are an important part of Ionic Pro™air purifying system and need
to be cleaned after every eight to ten days of use or if your unit starts to make a
buzzing noise (see
More frequent cleaning is often required if your Ionic Pro
or if you place it in a different location. Exposing your Ionic Pro
“TO CLEAN IONIZING WIRES” and “DEEP CLEANING” sections).
™
ionic air purifier is new
™
ionic air purifier
to candle/oil lamp/fireplace soot and smoke is not recommended and will require
the collection blades to be cleaned after every exposure (see “IMPORTANT WARNINGS”).
8
OPERATING THE IONIC PRO™IONIC AIR PURIFIER
UNIT
9
CLEANING & MAINTENANCE
Page 7
IPP_Manual_Revise_FNL.qxp 8/22/04 9:43 PM Page 12
HELPFUL TIPS: Remember to clean your Ionic Pro™ionic air
purifier every week and any time the red CLEAN/FAULT light
comes on or whenever you hear your unit begin to make
excessive noise.
To Clean the Collection Blades
Turn off and unplug your Ionic Pro™air
purifier. Let the unit rest a minute. Next,
slide the collection blades out of the top of
your Ionic Pro
Do not touch the metal blades until after
discharging residual electricity by touching
blades to an electrical ground such as water
pipe or metal faucet. Wipe away the trapped
particles collected on the three blades with a
slightly damp sponge or cloth. If you use a
slightly damp cloth to clean the blades, it is
possible the collection blades will be
completely dry within two to three hours.
Always allow the collection blades to dry
COLLECTION BLADES
thoroughly before resuming use.
IMPORTANT: To avoid damaging your Ionic Pro
collection blades are completely dry and free of all moisture and that your Ionic
™
ionic air purifier is turned off and unplugged before attempting to horizontally
Pro
re-insert the collection blades. See “Horizontal Insertion of Collection Blades”.
™
ionic air purifier.
™
ionic air purifier, make sure the
HORIZONTAL INSERTION OF COLLECTION BLADES:
ALWAYS LAY DOWN YOUR IONIC PRO™IONIC AIR PURIFIER
HORIZONTALLY ON A SOLID SURFACE ANY TIME YOU NEED TO
INSERT YOUR THOROUGHLY CLEAN AND DRY COLLECTION
BLADES (SEE DIAGRAM F).
F. "HORIZONTAL VIEW"
You can
back horizontally. This protects your Ionic Pro™ionic air purifier from damage
that could result from dropping the blades back into the unit in the upright
standing position.
only replace the collection blades when the unit is placed flat on its
If you have used soap and water to clean the collection blades, wait at least 24
hours to ensure that they are thoroughly dry before horizontally re-inserting them
into your Ionic Pro™ ionic air purifier.
Please note that the collection blades cannot be re-inserted when the unit is in
its vertical (upright) position.
10
CLEANING & MAINTENANCE
11
CLEANING & MAINTENANCE
Page 8
IPP_Manual_Revise_FNL.qxp 8/22/04 9:43 PM Page 14
To Clean the Ionizing Wires
The internal ionizing wires need to be
cleaned after every eight to ten days of
use. There is a Wire Cleaning
Mechanism used to clean the internal
ionizing wires which you slide up and
down to scrape off particle residue.
(see Diagram B of the Operating Panel
to locate the Wire Cleaning
Mechanism). Lift and lower the Wire
Cleaning Mechanism three or four
times to thoroughly clean the ionizing
wires (see Diagram G).
REMEMBER TO ALWAYS RETURN THE WIRE
CLEANING MECHANISM TO ITS ORIGINAL POSITION
BEFORE ATTEMPTING TO RESUME USE OR THE
UNIT WILL NOT FUNCTION.
Deep Cleaning
Noisy functioning (audible loud
buzzing sound) is a sign that your
Ionic Pro
overdue for a complete clean-up of
the collection blades and the internal
ionizing wires. The internal ionizing
wires must be kept clean to ensure
silent and normal operation. Before
beginning, make sure you have read
all of the safety precautions and
cleaning instructions located in the
“SAFETY INSTRUCTION”, “IMPORTANT
WARNINGS”, and “CLEANING &
MAINTENANCE”
product manual.
™
ionic air purifier is
sections of this
First, turn OFF and unplug your Ionic Pro™ionic air purifier. Let it rest for a
minute. Next, slide out the collection blades from the top of the outer case housing.
Use a cloth and warm, sudsy water to wipe away dirt particles on the blades’
surfaces and edges. Rinse and let the blades dry thoroughly for 24 hours before
™
horizontally inserting them in your Ionic Pro
ionic air purifier. If desired, you can
purchase a second set of collection blades to use while the original blades are
drying to allow for virtually uninterrupted air purification. Remember to always lay
™
the Ionic Pro
ionic air purifier on its side before horizontally re-inserting the
collection blades (see Diagram F).
IMPORTANT: FINALLY, LIFT AND LOWER THE WIRE CLEANING MECHANISM THREE OR FOUR TIMES. THIS
MANEUVER WILL HELP TO DISLODGE ANY REMAINING PARTICLES TRAPPED ON THE IONIZING WIRES. MAKE
SURE THE THOROUGHLY CLEANED AND DRIED COLLECTION BLADES ARE PROPERLY HORIZONTALLY INSERTED
AND THE WIRE CLEANING MECHANISM IS BACK IN ITS ORIGINAL POSITION BEFORE RESUMING USE OR THE
UNIT WILL NOT FUNCTION.
Cleaning External Surfaces
Over time, some particles and dust may accumulate on the external surfaces of
your Ionic Pro™ionic air purifier. If this happens, turn off and unplug the unit.
Mix one ounce of laundry bleach with five ounces of water and apply sparingly
with a sponge to wipe the outer case surfaces. Do not allow water to slip into the
internal parts of the Ionic Pro
functioning and may result in injury to you. Allow the unit to dry for at least
24 hours before resuming use.
™
ionic air purifier as this could damage its
G. CLEANING WIRES
12
CLEANING & MAINTENANCE
13
CLEANING & MAINTENANCE
Page 9
IPP_Manual_Revise_FNL.qxp 8/22/04 9:43 PM Page 16
TROUBLE-SHOOTING
TROUBLE
Indication/Setting light
not on
Red CLEAN light is on
Excessive noise
generated*
Collection blades do not go
back in
Indication light does not go
on
REASON
Machine is unplugged.
ON/OFF button has not
been pressed.
Too much dust has
accumulated.
Collection blades
are jarred or removed
suddenly.
Red light may go on
if the unit just needs
“reset”.
to be
Too much dust has
accumulated or internal
parts are wet.
Vertical insertion
Collection blades are not
completely inserted.
TROUBLE-SHOOTING
Check if plug is loose.
Press the ON/OFF
button.
Turn off, unplug and clean
using instructions from the
“Deep Cleaning” section.
Remove and horizontally
re-insert collection
blades and press "on"
button to reset.
Press “on” button to reset.
Clean and dry blades
and ionizing wires
thoroughly*. Keep the
machine dry.
Use the “Horizontal
Insertion” method
described on page 11.
Check to see that the
blades are completely
seated in housing.
MORE THINGS YOU SHOULD KNOW
Ozone and Your Health
After you activate your Ionic Pro™ionic air purifier, you may notice a new clean
scent.
Ozone is the scent you are smelling. Ozone is a combination of three oxygen
atoms. The Ionic Pro
results in very low ozone emission.
The Ionic Pro
™
ozone emission (less than 50 parts per billion) and meets the UL867 standard
for consumer products. UL867 is the U.L. standard for safety for electro-static
air cleaners.
Individuals with a history of respiratory disease, asthma, heart disease, lung disease,
breathing problems or concerns about ozone should ask their doctor whether the
concentrations of ozone generated by this or other commercial ionic air purifiers are
appropriate for their specific health needs.
Ordering Extra Collection Blades
Enjoy virtually uninterrupted air purification by ordering an extra set of collection
blades today.
This way you can always have a clean and thoroughly dry set of collection blades
available to insert into your Ionic Pro
are being cleaned and dried for 24 hours.
Visit our website at
collection blades today.
™
air purifying system utilizes an ionizing process which
ionic air purifier complies with U.S. safety requirements for low
™
ionic air purifier whenever the other blades
www.ionicpro.com or call 1.800.875.8577 to order your new
*See “Cleaning & Maintenance” section
14
TROUBLE-SHOOTING
Wire Cleaning Mechanism is
not completely inserted
Check to see that Wire
Cleaning Mechanism
is completely seated in
housing.
15
MORE THINGS YOU SHOULD KNOW
Page 10
IPP_Manual_Revise_FNL.qxp 8/22/04 9:43 PM Page 18
ONE YEAR WARRANTY
Ionic Pro, LLC, warrants your Ionic Pro™ionic air purifier to be free from defects
in materials and workmanship for one year from the original purchase date.
Should the product have a defect in materials or workmanship, we will repair or
replace it without charge to you. A shipping and processing fee may apply.
To obtain service under warranty, simply call our Customer Service Center
toll-free at
This warranty does not cover any damage caused by accident, misuse or
any use other than as intended and described in this owner’s guide, or
damage resulting from failure to maintain and clean this product as specified
in this product manual.
THIS ARBITRATION AGREEMENT AFFECTS YOUR LEGAL RIGHTS AND REMEDIES BY PROVIDING THAT DISPUTES
BETWEEN YOU AND IONIC PRO, LLC MUST BE RESOLVED THROUGH BINDING ARBITRATION, RATHER THAN IN A COURT.
PLEASE READ THIS AGREEMENT CAREFULLY. YOU WILL ACCEPT THE TERMS OF THIS AGREEMENT BY RETAINING THE
PRODUCT(S) SHIPPED IN CONNECTION WITH THIS AGREEMENT (THE “PRODUCT”) FOR MORE THAN FOURTEEN (14)
DAYS AFTER RECEIPT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, YOU MAY RETURN THE PRODUCT TO
IONIC PRO, LLC WITHIN FOURTEEN (14) DAYS OF RECEIPT AT NO COST TO YOU.
1.
RESOLUTION OF CLAIMS OR DISPUTES. Any claim or dispute between you and Ionic Pro, LLC (or any of Ionic Pro,
LLC’s subsidiaries or affiliates) (“Ionic Pro”) arising out of or relating in any way to the Product or this Agreement
shall be resolved through final, binding arbitration. This arbitration obligation applies regardless of whether the
claim or dispute involves a tort, fraud, misrepresentation, product liability, negligence, violation of a statute, or any
other legal theory. Both you and Ionic Pro specifically acknowledge and agree that you waive your right to bring a
lawsuit based on such claims or disputes and to have such lawsuit resolved by a judge or jury.
2.
LIMITATION OF LEGAL REMEDIES. All arbitrations under this Agreement shall be conducted on an individual (and
not a class-wide) basis, and an arbitrator shall have no authority to award class-wide relief. You acknowledge and
agree that this Agreement specifically prohibits you from commencing arbitration proceedings as a representative
of others or joining in any arbitration proceedings brought by any other person.
3.
ARBITRATION PROCEDURES.
a. Before commencing any arbitration proceedings under this Agreement, you must first present the claim or
dispute to Ionic Pro by calling 323-938-9200 and asking for the Legal Department and allowing Ionic Pro
the opportunity to resolve the claim or dispute. If your claim or dispute is not resolved within sixty (60) days,
you may commence arbitration proceedings in accordance with the terms of this Agreement.
b. The arbitration of any claim or dispute under this Agreement shall be conducted pursuant to the American
Arbitration Association’s (“AAA”) United States Commercial Dispute Resolution Procedures and
Supplementary Procedures for Consumer-Related Disputes. These rules and procedures are available by
calling the AAA or by visiting its web site at www.adr.org.
c. The arbitration of any claim or dispute under this Agreement shall be conducted in the State of California or
the location in which you received this Agreement.
d. All administrative expenses of arbitration proceedings commenced under this Agreement shall be
divided equally between you and Ionic Pro, except that: (a) if the claim or dispute that is the subject of the
arbitration proceedings is less than ten thousand dollars (US$10,000), you will be responsible for no more
than one hundred twenty-five dollars (US$125) in administrative expenses; (b) if the claim or dispute that
is the subject of the arbitration proceedings is more than ten thousand dollars (US$10,000) but less than
seventy-five thousand dollars (US$75,000), you will be responsible for no more than three hundred
seventy-five dollars (US$375) in administrative expenses; and (c) if the claim or dispute that is the subject
of the arbitration proceedings is more than seventy-five thousand dollars (US$75,000), then you will be
responsible for administrative expenses in accordance with the Commercial Fee Schedule provided by the
AAA. You acknowledge and agree that each party shall pay the fees and costs of its own counsel, experts
and witnesses.
4.
CHOICE OF LAW. This Agreement shall be governed by the United States Federal Arbitration Act and the laws of the
state of California.
5.
SEVERABILITY. If any provision of this Agreement is declared or found to be unlawful, unenforceable or void,
such provision will be ineffective only to the extent that it is found unlawful, unenforceable or void, and the
remainder of the provision and all other provisions shall remain fully enforceable.
16
ONE YEAR WARRANTY
17
ARBITRATION AGREEMENT
Page 11
IPP_Manual_Revise_FNL.qxp 8/22/04 9:43 PM Page 20
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.