Ion Energy Solutions M54120 User Manual

Page 1

Ion Energy Solutions

The Most Powerful Utility Data in the World in MultiFamily

Ion Energy Solutions

[phone] - Louisville Kentucky
www.ionenergysolutions.com

M54120 Battery Water Meter User Guide

The M54120 battery powered water meter collects data for water usage in an apartment. There are
point of use applications or main feed applications that the M54120 battery powered water is used
for.

Step 1: Locate the plumbing assembly.

Step 2: The plumbing assembly has a ow sensor the M54120 battery powered water meter gets

attached too.

Battery powered

water meter

Flow sensor

Serial number

sticker

Baby board

Step 3: Magnet the M54120 water meter to get it to join the network on the property. This is required!
A successful network join would be indicated by 4 green LED blinks. Remove the serial number sticker
located on the water meter, pictured above. Place the serial number sticker on the sticker sheet
supplied by ION in the correct place such as the apartment for which it is located in and in the correct
device column.

The rubber band around the water
meter is there to ensure the baby board
does not come out during delivery or
before the install!! The baby board is a
critical part !!!

!

Page 2

Ion Energy Solutions

The Most Powerful Utility Data in the World in MultiFamily

Ion Energy Solutions

[phone] - Louisville Kentucky
www.ionenergysolutions.com

Step 4: Attach the M54120 water meter to the ow sensor on the plumbing assembly. The M54120
water meter can only go onto the ow sensor in one direction. The nipple on the ow sensor goes into

the nipple gap on the M54120 water meter.

Step 5: There is a black clip that holds the M54120 water meter to the ow sensor. When the water
meter is seated properly to the ow sensor secure with the black clip.

There will be two click sounds made by the water meter clip when properly put on.

The battery powered water meter can

only go on the ow sensor one way!

If the battery water meter is not on
correctly, the water won’t seat onto

the ow sensor properly!! Check the

plumbing assembly to ensure there
are no leaks!!!

!

Nipple on ow

sensor

Nipple gap on battery
powered water meter

Squeeze the black clips
ends until you hear a click
sound from each side of
the clip

Black clip