Ione SCORPIUSN4WL User Manual

Scorpius-N4WL

Wireless Numerical Mouse Keypad

User Guide

Thank you for purchasing Scorpius-N4WL, another great addition to our IONE
innovative creations. Please read this user guide for information on using this product.
If you need more information, please visit us at the following website

www.ione.com.tw , www.ione-usa.com or www.ione-europe.com .

Introduction

Scorpius-N4WL is designed for long distance wireless operation for your convenience.
This stylishly designed keypad fits perfectly into any surroundings. It is equipped
with Scissor Key structure, giving a slim and responsive feedback. The
Scorpius-N4WL is also built with low power consumption and smart power saving
function for your peace of mind.

Feature

• 2.4GHz RF wireless technology

• Mode Switch between mouse – keypad

• Precision-engineered Scissor key structure

• 1000 dpi optical resolution with standard mouse functions

• Low power consumption and smart power saving function

Package Contents:

1. Wireless Numerical Mouse Keypad

2. Dongle Receiver

3. 2 x AAA Batteries

4. User Guide

System Requirements:

IBM or compatible PC system
Microsoft Windows 2000/XP/Vista

1

Hardware Installation

Step1: Insert 2 AAA batteries into the battery compartment of keypad with correct
polarity.

Step2: Please refer to the +, - diagram inside the battery compartment.
Step3: Turn on your computer and plug the dongle receiver into a USB port of your
computer.
Step4: Your computer will detect this USB device automatically.

Definition of LEDs:

Indicator
Mode

Keypad with mouse

(Default )

Keypad Only ON OFF ON

Num Lock

Indicator

Mouse

Indicator

ON ON ON

Keypad/Battery Low

Indicator

Mouse Only OFF ON OFF

*Battery Low Blink

2

ID Setting

The product has been pre-set in ID for radio frequency and the keypad and dongle
receiver are already paired. It is not necessary to do the ID setting when you use
Scorpius-N4WL for the first time. However, in case it needs to be re-set, please
follow the process below for the ID setting.

Step 1: Plug the dongle receiver into your computer. For the best performance, please

plug the dongle receiver into the front USB port of your computer, or use a
USB extension cable to place the dongle receiver 20cm away from monitor,

speaker, power supply, USB hub and other RF interference sources.
Step 2: Press the connect button on the dongle receiver. The LED will start to blink.
Step 3: Within 8 seconds, please press the connect button on the bottom of the

Wireless Mouse keypad.

Step 4: The LED on the dongle receiver will blink very fast for 3 seconds. This means

that ID setting is completed.

Note: If the Wireless Keypad does not work properly, please go back to step 2.

Reminder: For optimal performance, please place the dongle receiver 20cm away
from other RF interference devices such as computer monitors and speakers.

Now, Enjoy and Have a Fun!!!

3

TROUBLE SHOOTING GUIDE

Symptom Remedy

Keypad or cursor
doesn’t function at all

• Make sure that batteries have sufficient power level.

• Follow the steps of ID setting to connect wireless keypad

and receiver again.

The LED on RF receiver
or keypad does not blink
when pressing keys on
keypad

• Ensure computer is powered on and receiver is connected

to the USB port of computer.

• Make sure that batteries have sufficient power level.

• Unplug the receiver and plug it in again.

• Follow the steps of ID setting to connect wireless keypad

and receiver again.

• Make sure the operation distance is within 10 meters.

For further Question Please e-mail us at [e-mail], [e-mail]

or [e-mail]

4