Ione RFCOMBOSCM7ITR Users Manual

`

Keyboard: Scorpius KIV, Scorpius MVII, Scorpius N1,Gemini M1,
Mouse: Lynx KIV, Lynx LV ,Lynx N2,Gemini M1, Gemini K1,Gemini N1

Receiver: RceiverKI, Gemini M1, Gemini K1,Gemini N1

PM:
Electronic Engineer:
Mechanical Engineer:

Produce by:

Gemini K1,Gemini N1

User’s Guide

Gemini MI (P)

WARNING

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.

You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void your
authority to operate such equipment.

The manufacturer is not responsible for any radio or TV Interference caused by
unauthorized modifications to this equipment. Such modifications could void the user's
authority to operate the equipment.

The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received ,including interference that may
cause undesired operation.

2

Gemini MI (P)

ⅠSCOPE

The purpose of this specification is to define the electrical and
mechanical characteristics of the “ Gemini MI P “.

Ⅱ GENERAL

Description

The “Gemini MI P” keyboard and Mouse Combination has an
enhanced NetMedia design and can work with any IBM PC
PS/2 compatible computer. Utilizing the latest in rubber
mechanical key switch technology, the Scorpius MVII offers
durability and style that will enhance any system for years to
come. 16 Extra rubber buttons let keyboard link more closer
with PC, touch one button to make some functions work
immediately.

Features

•Radio Frequency technology

•Netmedia for easy Internet and Multimedia control

•Low power consumption

•800dpi resolution

•High quality Rubber-Membrane key switches

•Tactile key stroke

•1,000,000 life cycles per switch

•104,105,106,107,109 key layout

Package Contents:

˙Color box

˙Pcs /Carton: 10pcs
˙Package contents

- RF Keyboard

- RF Mouse

- Receiver

- 3AA & 2AA batteries

3

Gemini MI (P)

- User Manual

System requirements

• Designed to work with IBM PC compatible

• Perfected for using with Windows® 98SE / 2000 / ME /
XP.

Ⅲ Electrical specification

Environmental of Temperatures

Operating temperature 0℃ to 50℃.
Non-operation temperature -10℃ to 60℃.

Humidity Test

Condition temperature 25C~55C
Operating humidity 10% to 85%
Non-operation Humidity 10% to 85%
Heat storage 60℃, 24Hours

Cool storage -10℃, 24Hours
Humidity storage 85%, 24Hours

Performance specification/ Keyboard

Switch Life 1,000,000 cycle life
Performance specification/ Mouse
X,Y Encoder Solid-State Optical Mouse Sensor
Scroll Encoder Mechanical
Switch Life 1,000,000 cycle life
Scroll Encode Life 100,000 cycle life
Hardware Resolution 800dpi

Power Requirements

Keyboard

Voltage

Working Mode 3V 7mA
Sleeping Mode 3V 0.14 0.1mA 0.06

Power Consumption Mode Operation
Max Nom Min

Operation voltage 2V~4.5V

Mouse

Working Mode 3V 40mA
Sleeping Mode 3V 4mA 0.2mA 0.01mA
Operation voltage 3.5V~1.5V

Power Consumption 30mA Receive
Operation Voltage 5Vdc+5%

EMI / EMC

FCC ID Keyboard: F2QRFCOMBOSCM7ITR

Mouse: F2Q96C96001M7

CE 1.EN55022: 1998 Class B

2.EN 301 489-3

3.EN 300 220-3

4

Gemini MI (P)

4.IEC 60 950:1991+A1+A2+A3+A4+A11

5.EN 60 950:1992+A1+A2+A3+A4+A11

BSMI CNS13438 乙類.

Environmental of electrical

Shock test The mouse shall withstand a shock equal to 20G

forces, half sine wave for 11 msec duration in all
three (3) orthogonal axes.

Drop test (unpackage) Drop the mouse from 60 cm height above a wood

board 15mm thick placed on a concrete floor, 3
times in th e s ame direction.

Ⅳ Mechanical specification

Material Keyboard Mouse Receiver
Cover HIPS PC HIPS
Key top ABS ABS HIPS

Body Weight & Dimension Keyboard Mouse Receiver

Weight 800g 100.5grams 88.5grams
Length 475.5mm 130.1mm 102.8mm
Width 172mm 73.1mm 82.2mm
High 32mm 39.5 mm 30.3mm

Body colors Keyboard Mouse Receiver

Upper color Black Black Black
Lower color Black Black Black
Key color Black 6U Silver(877c) ­Left and Right key color - Silver(877c) ­Roller color - Cool Gray ­Cable color - - Black
Windows - - Black
Rubber key color Grey Grey Grey
Model Label color White White White

Rubber/ Membrane

Rubber Dome contact
Resister
Membrane Contact
Resister
Membrane Open Resister 10MΩ

Box Dimension:

100Ω(max)

100Ω

Length 470mm
Width 205mm
High 95mm

5

Gemini MI (P)

Ⅴ Hot keys explain

Definition of the 16 Multimedia Hot Keys

Refresh : Refresh web sites

Mail



Media Select : Turn on the Media player program.

« Volume Up : Increase volume output

Mute : Mute volume output temporarily
Volume Down : Decrease volume output

 Stop : Stop Playing

Play/Pause : Instruct the CD/VCD/DVD player to the previous

 Previous Track : Instruct the CD/VCD/DVD player to the previous
 Next track : Instruct the CD/VCD/DVD player to the next track

Home : Back to web home page

Favorites : Open My favorite after into Internet browser

Stop : Stopping web download current web Page

9

Search : Search particular web sites

⊥ Back : Back to the last page on Internet browser
_ Forward : Forward to the next page on Internet browser

: Open Default E-mail application

track
track

application

6

Gemini MI (P)

Ⅵ Cable specification

Connector Pin Assignments

The standard connector pin out for PS/2 is as follows:

DESCRIPTION SIGNAL PINS CONNECTOR

Keyboard Date +5Vdc Signal 1
NC NC 2
Ground 0 3
Power Supply +5Vdc 4
Keyboard Clock +5Vdc Signal 5
NC NC 6

7

Gemini MI (P)

Ⅶ RF SPEC

Keyboard Mouse Receive

FREAUENCY 27.095MHZ 27.045MHZ 26.64MHZ/26.59MHZ

MODULATION FSK FSK FSK

ID 256 256 256

DATA RATE 4.8K 4.8K 4.8K

POWER LEVEL 0 dB 0 dB

SENSITIVITY -90 dBm

TRANSISSION

DISTANCE

1.5M 1.5M 1.5M

8

Gemini MI (P)

New key codes for scan set 1:

New key Make Break

LWIN E0 5B E0 DB
RWIN E0 5C E0 DC
APP E0 5D E0 DD
N-CHG(131) 7B FB
GHG(132) 79 F9
ROMA(133) 70 F0
K14 7D FD
K56 73 F3
K107 7E FE
KL F1 X
KR F0 X
POWER E0 5E E0 DE
SLEEP E0 5F F0 DF
WAKE UP E0 63 E0 E3

New key codes for scan set 2:

New key Make Break

LWIN E0 1F E0 F0 1F
RWIN E0 27 E0 F0 27
APP E0 2F E0 F0 2F
N-CHG(131) 67 F0 67
GHG(132) 64 F0 64
ROMA(133) 13 F0 13
K14 6A F0 6A
K56 51 F0 51
K107 6D F0 6D
KL F1 X
KR F2 X
POWER E0 37 E0 F0 37
SLEEP E0 3F E0 F0 3F
WAKE UP E0 5E E0 F0 5E

New key codes for scan set 3:

New key Make Break
LWIN 8B F0 8B MAKE/BREAK
RWIN 8C F0 8C MAKE/BREAK
APP 8D F0 8D MAKE/BREAK
N-CHG(131) 85 F0 85 MAKE
GHG(132) 86 F0 86 MAKE
ROMA(133) 87 F0 87 MAKE
K14 5D F0 5D TYPEMATIC
K56 51 F0 51 TYPEMATIC
K107 7B F0 7B TYPEMATIC
KL F1 X
KR F2 X
POWER X X
SLEEP X X
WAKE UP X X

9

Gemini MI (P)

Ⅷ Physical

10

Gemini MI (P)

11

Gemini MI (P)

Ⅸ SETUP GUIDE

Insert Batteries

Insert provided batteries in mouse and keyboard. Refer to diagram inside
battery compartment.

12

Gemini MI (P)

Setup for linkage

Reset ID before using

Step 1: Connect the receiver to your computer
Step 2: Push the button on the back of the mouse (in upper left corner).
Step 3: Push the “CONNECT” button on the receiver. Please note that this

step must be completed after Step 2 within 8 seconds.

Step 4: Move pointer, when the receiver and the mouse are connected,

the LED will blink, the setting has been completed.

Step 5: Please go back to Step 2 if the LED does not behave as that in

Step 4.

Step 6: Push the button on the back of the keyboard (in upper left

corner).

Step 7: Push the “CONNECT” button on the receiver. Please note that this

step must be completed after Step 6 within 8 seconds.

Step 8: Push “Space” key, when the receiver and the keyboard are

connected, the LED will blink, the setting has been completed.

Note: If same ID is used by other users and causes interference, just

repeat this reset procedure.

13

Gemini MI (P)

Software Installation

Turn on your computer and run either Windows 98SE / 2000 / ME / XP.

1. Insert the CD-ROM into the driver and first setup screen will appear. (If

setup does not run automatically, click Start, the Run and run “Auto
Run.exe”.) Click on “OK” to start setup. (Below is the setup process.
Please follow the screens.)

2. To perform the “NetMeida key functions setting”, you have to select

“Keyboard”.

3. To perform the “Programmable function setting” for mouse, you have

to select “3 Buttons Mouse”.

4. After installation is completed. Please re-start the computer.

14