Ione LYNXR17BTU Users Manual

Lynx-R17BT 2008/07/21

Bluetooth® Laser Mouse for Mobile Devices

User Guide

Thank you for purchasing Lynx-R17BT Bluetooth® Laser Mouse. Please take a

moment to go through this user guide for helpful information on using this product.

Notice

This product complies with IEC 60825-1, class I laser product.

Your product complies with FCC and CE rules.

This product has no serviceable parts. Use of controls or adjustments of procedures

other than the user guide may result in danger.

Turn off product and/or remove the AAA batteries before boarding an airplane.

The extended wireless range of the Bluetooth® radio signal could cause harmful

interference.

Compatibility and System Requirements

You must have a Bluetooth® enabled computer to use this device.

Lynx-R17BT Bluetooth® Laser Mouse is designed to work with Bluetooth® enabled

devices. Bluetooth® is generally enabled through either built-in Bluetooth® hardware, a

Bluetooth® USB adapter, or other type of Bluetooth® adapter.

Windows® XP with Bluetooth® enabling software that includes support for mice and

keyboards is required.

Mac OS X (10.2.8 or later) running Bluetooth® software version 1.5 or later is

required.

Introduction

Lynx-R17BT is equipped with high performance laser sensor which performs motion

detection at 800dpi resolution. Its sensor can accurately estimate motions over a wide

range of surfaces.

Lynx-R17BT has low power consumption and smart power saving function.

Feature

． Bluetooth® 2.0 wireless technology

． 800 dpi laser resolution

． Convenient scroll wheel design

． Smart power saving function with power switch

． Battery low indicator

Package Contents

1. Bluetooth® Laser Mouse

2. AAA Batteries x 2

3. User Guide

System Requirements

1. IBM or Compatible PC System

2. Win 98SE/ME/NT/2000/XP/XP MCE/VISTA

Hardware Installation

Step1: Insert 2 AAA batteries into the battery compartment with correct polarity.

Step2: Please refer to the +, - diagram inside the battery compartment.

Step3: Please refer to the Paring and Connection procedures.