Ione 4NE993DUSB Users Manual

LYNX 99 3D USB MOUSE

LYNX 99 3D USB MOUSE

LYNX 99 3D USB MOUSELYNX 99 3D USB MOUSE

SPECIFICATIONS

SPECIFICATIONS

SPECIFICATIONSSPECIFICATIONS

FCC ID:F2Q4NE993DUSB

DEC, 15, 1998

9F,#75,Sec, 1 Hsin Tai Wu Rd.

Hsichih, T aipei Hsien, Taiwan, R.O.C

(Far East World Center-Bldg.A)

TEL[phone]
FAX[phone]

WARNING

Note : This equipment has been tested and found to comply with the limits

for a Class B device, pursuant to Part 15 of FCC Rules. These limits are
designed to pr ovide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and , if not installed a nd used in accord ance with
the instructions, may cause harmful interference to radio communications
however , there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference

LYNX 99 /3d USB NET MOUSE SPECIFICATIONS

to radio or television reception, which can be determined by turning the
equipment off and on , the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the e quipment and receiver.
Connect the equipment into an outlet on a circuit different from that to

which the receiver in connected.

Consult the dealer or an experienced radio / TV technician for

technician for help.

Notice:

Changes or modifications not expressly approved by the part responsible
for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is
Subject to the following two conditions : (1) this device may not cause
Harmful interference, and (2) this device must accept any interference
Received, including interference that may cause undesired operation.

SCOPE

SCOPE

SCOPESCOPE

The purpose of this specification is to define the generic operational,
Environmental, electrical and mechanical characteristics of the
“LYNX 99 / 3D USB Net MOUSE “.

 GENERAL

GENERAL

GENERAL GENERAL

Description

The LYNX 99/3D USB Net MOUSE is designed for use with the Pentium above
compatible computers that with a USB connector. It is a 400 dot per inch (DPI)
opto-mechanical mouse. A built in microprocessor uses multiple rotary optical
encoders and a rubber coated ball to detect mouse movements. Count signals are
sent to the host computer where they are translated into motion of the display
screen cursor. Interface protocol is provided as follows:

Three Button-USB Mouse

The interface connection consists of four (4) USB-A plug adapter that is used for
Pentium above PC which support USB function.

Appearance / Durability

This product is intended for user used in home and office environments. Therefore ,
the quality of appearance and touch are of great importance. Because of the
environmental severity of the home and office place, longevity, durability, durability

2

LYNX 99 /3d USB NET MOUSE SPECIFICATIONS

and resistance to contamination are also of major concern. Good engineering
design practices shall be followed throughout, both mechanically and electrically.

Features

Unique “No Strain” ergonomic grip and classic style fits perfectly into the hand for

a comfortable and attractive feel.

Fully compatible with USB
For 3D model : MS Wheel Message compatible and Auto Reference compliant.
Opto-mechanical technology for highly accurate pointing
Highly reliable micro-switched with tactile click sound and feeling
Strong point: bundle with scroll-In-Mouse program which make operations more

easy and convenient.

Package Contents

Mouse Driver
User manual (or on box)

Controller Specifications

Parameter Minimum Typical Maximum Unit
Oscillating frequency 6-10% 6 6+10% MHz
Rising edge crossed width 75 -- 300 ns
Falling edge crossed width 75 -- 300 ns
Mouse CLK active time -- 83.3 -- ns
Mousse CLK inactive time -- 83.3 -- ns

Performance specifications

Hardware Resolution 400dpi
Tracking Speed 250mm/sec
Hysteresis -678 to 678 count for both X, Y axes(unit moves

any direction and returns same path. Distance=400
mm, Speed=100+ mm/sec

Linear motion accuracy 16 x D x sinQ°+15% for both X, Y axes (unit moves

any direction. Q = moving angle, D
(Distance)=400mm ,
Speed=100 +5mm/sec

Encoder Opto –Mechanical
Switch Life 1,000,000 cycle life
Supply voltage 4.0-5.25V Vmas-6.5V
Power dissipation Maximum 300mw

3

LYNX 99 /3d USB NET MOUSE SPECIFICATIONS

 ENVIRONMENTAL SPECIFICATIONS

ENVIRONMENTAL SPECIFICATIONS

ENVIRONMENTAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS

Temperature

Operating

The operating temperature range shall be from 0 to 70. There shall be an
operational temperature test of a single cycle, ambient, cold, hot, ambient, and
ambient, With a minimum of a 15 minute dwell (pause) for every 15 increment of
change. The rate of temperature change shall not exceed 20 per hour. The
Joystick will operate normally throughout the cycle requiring no operator
Intervention or corrective actions, except to cause normal movement.

Non-Operating

The non-operating temperature range shall be from-65 to 150. There Shall
be a thermal shock test of five(5) cycles from-15 to 55 holding for 30 minutes at
each extreme. The rate of temperature change shall not exceed 25 per hour.
Normal mouse operation will be verified before and after the thermal shock text.

Operating

Non-Operating

Non-operating

Humidity

Humidity

HumidityHumidity

The operating relative humidity range shall be from10% to 85% non condensing
ambient temperature.

The non-operating relative humidity range shall be from 10% to 85% non­Condensing. The mouse shall withstand an environment varying between 25 and
55, 85% relative humidity, non condensing, for a period of 96 hours.

Vibration Test

1. 5 to 31 Hz 0.38 mm peak to peak

displacement : Continuous logarithmic rates of 0.5 octave / minute back and

2. 32 to 500 Hz:0.75 G force limitation:

Continuous logarithmic rates of 0.5 octave / minute back and forth.

3. 5 to 500 Hz Random vibrations: 0.01G2/ Hz for 30 minutes :

Continuous logarithmic rates of 0.5 octave / minute back and forth

(Packaged for shipment)

(Packaged for shipment)

(Packaged for shipment)(Packaged for shipment)

forth.

4