ION Audio ISP95 User Manual

ISP95 Bluetooth Stereo Speaker User’s Manual

1. Notice Before Using

Thank you for purchasing MUSTANG STEREO. Please read this User's Manual completely before use.

ISP95 designed for enjoy the high quality wireless music stream with a carriable size that based on the latest Bluetooth® wireless technology, it’s also built in FM/AM radio function. ISP95 can be easily connected to a mobile phone or other Bluetooth® enabled devices, such as Notebook PC, Tablets, iPod, etc., for music listening.

ISP95 is compliant with Bluetooth v4.2 specification, supports A2DP and AVRCP profiles.

For more details, please read the user guide following.

2. Specification

Bluetooth specification: V4.2

Bluetooth operation frequency: 2.402 2.48GHz Supported profile: A2DP, AVRCP

Bluetooth Operation range: Up to 10 meters FM frequency range: 88~108MHz

1

AM frequency range: 520~1710KHz

Output power: 6W+6W

Play time: 5 hours in maximum volume

Charge time: 6 Hours

Battery type: 2500mAh/7.4V, Rechargeable

3.ISP95 Bluetooth speaker overview

Power

Radio modePlay/PausePreviousNext

BT mode

BT mode IndicatorFM mode indicatorAM mode indicatorAUX mode indicator

11Charging indicator

12AUX IN port

13Charging Port

2

4. Package contents list:

1)ISP95 Bluetooth Speaker

2)AC/DC adapter

3)USB Charging Cable

4)Audio Cable

5)User Manual

6)Quickstart Guide

5. Battery information

The device is equipped with an integrated lithium ion battery. The battery cannot be replaced. Do not attempt to remove the battery from the device since it would damage the device. The full performance of a new battery is not achieved until after two or three complete charging discharging cycles.

Disconnect the ISP95 from the power supply as soon as the battery is fully charged. A charged battery will lose its capacity if it is not used regularly.

Important:

Ensure that the battery is fully charged if the device is going to be left unused for a long period of time.

3

6. Charging the battery

Charge the battery completely before its first use. Read the section "Battery information" before start charging.

1)Use supplied USB cable and AC/DC adaptor to charge.

2)When the charger is connected to the speaker, the charging indicator will turn red. Charging the battery fully may take up to 6 hours.

3)When the battery is fully charged, the indicator light will turn green. Disconnect the charger from the speaker and the outlet. The speaker is ready to use.

NOTE:

Give your speaker a full charge before using for the first time.

Supplied AC/DC adaptor can be a power supplier for playing while charging in Bluetooth mode. But it’s not recommended for radio mode.

4