Iomega 2CLIKREL User Manual

Late Breaking News

Clik! Drive

Clik! Drive

Please read this flyer for important information not

available in the Clik! Drive User’s Manual.

For additional assistance, visit us on the Web at www.iomega.com.

Parallel Port Users: Do not connect a Clik! Mobile
Drive and a Zip® drive together via their pass­through port. See page 7 (step 9), page 9 (Daisy
Chaining Parallel Port Devices), and page 43
(Troubleshooting for Parallel Port Connection) in
the Clik! Drive User’s Manual for more information.

Notebook Users: If you are following the software
installation steps as outlined in the Clik! Drive User’s
Manual, notice that “Step 3: Type of Install”
indicates the software components that will be
installed on your notebook computer. These have
changed since the printing of the manual.

The default setting under “Notebook” assumes you will be using the Clik! drive with the
Clik! PC Card Interface and that you will NOT need the parallel port driver. If you want to
use the Clik! Parallel Port Interface with the Clik! Mobile Drive, choose “Custom” and select
“Iomega Clik! Parallel Port Driver.”

PC Card Users: Your Quick Start Card and the
Clik! Drive User’s Manual depict the Clik! PC
Card Adapter and Clik! PC Card Cable
as one piece. However,
they are two separate
pieces that must be
connected as
illustrated.

Windows NT® 4.0 Users: Instructions for setting up the Clik! Mobile Drive with Windows
NT 4.0 are not included in the Clik! Drive User’s Manual. Before you install hardware or
software, please open the NTInstall.wri file found on the Clik! Software CD-ROM and
follow the detailed instructions.

Warning: The Clik! Battery must always be attached to the Clik! Mobile Drive. Never
operate the Clik! Mobile Drive without the Clik! Battery attached. The Clik! Mobile Drive
will be severely damaged if the Clik! Battery is not attached and the Clik! Mobile Drive is set
on top of a metal object (such as a Clik! disk, metal ruler, or metal desk). To avoid this
possibility, always attach the Clik! Battery to the Clik! Mobile Drive.

IomegaWare™ Software Compatibility: The Clik! Mobile Drive does not use the
same software (IomegaWare™ Software) that your Zip® or Jaz® drives uses.
IomegaWare™ functions will not work with your Clik! Mobile Drive.

Copyright © 1998 Iomega Corporation. Iomega, the stylized “i” logo, Zip, Jaz, and Ditto are registered
trademarks of, and Clik! is a trademark of Iomega Corporation. All other products and brand names are
the property of their respective owners.

03782100