IOGear Q1220, GKMB01 Quick Start Manual

Bluetooth Desktop Dock

Quick Start Guide

GKMB01

PART NO. Q1220

www.iogear.com

1

Package Contents

1 x Bluetooth Desktop Dock main unit
1 x Device back support

System Requirements:

- Mobile Devices: Support Bluetooth HID profile*

- iOS Devices: iOS 4.2 and up

- Android Devices: 3.0 and up

- Computer: With minimum 1 type A USB port; Windows 2000 and up & Mac OS 10.6
and up

- Keyboard and Mouse: USB based keyboard and mouse

- USB Power Adapter (optional): The Bluetooth Desktop Dock is powered by a computer
USB port or a an optional USB power supply when not plugged into a computer

* Some mobile devices do not support mouse function, please consult your mobile
device manufacturers for details.

Overview

1 x Quick Start Guide
1 x Warranty/Registration Card

1. Port LED’s

2. Keyboard Port

3. Mouse Port

4. USB Cable to the PC

5. Device Back Support

5

1

2

3

4

2

Hardware Installation

STEP 1

Plug the Bluetooth Desktop Dock’s
USB cable into the computer. If it is
the first time install, please allow a
few seconds for the computer to
load the drivers.

STEP 2

Unplug the USB keyboard and
mouse from the computer, and
plug them into the Bluetooth
Desktop Dock. Perform a quick
test by typing a few words to make
sure the keyboard and mouse
work fine with the computer.

STEP 3

Install the plastic back support on the
Bluetooth Desktop Dock and place your mobile
device on the dock.

STEP 4

Now it is time to connect your Bluetooth mobile
devices to the Bluetooth Desktop Dock. If this
is the 1st time connection please see Bluetooth
pairing. To change out a previously paired
devices, you most first delete the previous
devices by pressing “ALT + F6”. The Bluetooth
Desktop Dock allows 2 Bluetooth mobile
devices to be connected. If you wish to change
out both paired devices, press “ALT + F7”.

STEP 2

STEP 2

STEP 3

STEP 1