IOGear GW3DHDKIT User Manual
Quick Start Guide
Wireless 3D Digital Kit
GW3DHDKIT
Part No. Q1197-a
Package Contents
1 x Wireless 3D Transmitter 1 x Wireless 3D Receiver 1 x Remote Control
POWER IR INFO
SOURCE
1 x IR Blaster Cable 2 x Power Adapter 1 x HDMI Cable
Round connector
for Transmitter
USB connector
for Receiver
2 x Battery (AAA)
1 x Quick Start Guide
1 x Warranty / Registration Card
Product Specifications
General Specifications
Supported Video
Resolutions
Supported Audio
Formats
Transmission Distance
Antenna High Performance Internal Antennas
Operating Frequ
Power Supply 100 ~ 240V AC in, 5V DC out Power Adaptor
Operating Temperature 32° ~104°F
Interfaces
IR
Control
Power
Interface
Switches
LEDs
Dimensions (W) x (L) x (H) 7.25” x 3.75” x 1.25” 3.75” x 3.75” x 1.25”
HDMI
Input
Digital
Audio
1080p, 1080i, 720p, 576p, 480p
Up to 6 Mbps AC3 and DTS
The maximum video transmission range is 100 feet.*
If you have more than one pair, each transmitter and
receiver should be at least 6.5 feet away from one another.
encies 4.9 ~ 5.9GHz (Include non-DFS and DFS Frequency Bands)
Interfaces Transmitter Receiver
HDMI Input Two (Type A) - A/V
HDMI Output One (Type A) One (Type A)
IR Sensor Yes Yes
Extender 2.5mm Jack; 33KHz ~ 40KHz -
Power Input 5V DC Jack 5V mini USB
Power Switch Yes (One Tack Switch) Yes (One Tack Switch)
Source Swit
ch Yes (One Tack Switch) Yes (One Tack Switch)
Power LED 1 x LED (Blue/Red) 1 x LED (Blue/Red)
Source LED 2 x Blue LED 2 x Blue LED
Signal Status - OSD Displayed
*Distances may vary depending on environment; solid objects such as steel, concrete and brick may
view shorter distances
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks of HDMI Licensing LLC.
Device Overview
Front
Transmitter Receiver
1
2
3
4
1. Source Indicator - The solid blue LED indicator shows the active media source
2. Source Selection Button - Press to switch media source of the transmitter
3. Power Button with LED Indicator - Press to turn the transmitter on or off
4. IR Sensor - See IR Blaster section for details
Back
Transmitter Receiver
3
2
1
21 13 4 5 7 8 96
1. Tripod Bracket
2. DC - Power adapter socket
3. HDMI 1 - HDMI media source 1
4. HDMI 2 - HDMI media source 2
5. HDMI OUT - HDMI loop-through port for local
TV connection (for 2 TV set-up)
6. IR OUT - IR blaster cable port (optional)
7. SERVICE - Reserved for manufacturer service purposes
8. Mini USB - Power adapter socket
9. HDMI - HDMI output port for TV connection
Remote
1. Power - Press to turn both receiver and transmitter on or off.
2. IR - Press to switch the IR Blaster frequency to meet media source
device’s requirement. Please refer to your device’s IR specifications.
3. INFO - Press to show on-screen-display (OSD) information on your
Receiver TV. Press again to exit.
4. SOURCE Selection - Press to switch media source of the transmitter
1
POWER IR INFO
SOURCE
2
3
4
Loading...