IOGear GUWAVKIT3 User Manual
Quick Start Guide
Wireless 1080p Computer to HDTV Kit
PART NO. Q1173
Package Contents
1
1 x Wireless A / V Receiver (device adapter + A / V base)
2
1 x Wireless USB Transmitter (for computer)
3
1 x Power Adapter
1 x HDMI Cable
1 x Quick Start Guide
1 x Warranty/Registration Card
1 x Installation CD
1 2
Start Here!
Requirements
PC:
• Microsoft Windows® 7, Windows Vista® SP2 or Windows® XP (32-bit) SP3
• 1.8 GHz processor (2.4GHz recommended) with 1GB RAM (3GB recommended)
• 1 USB 2.0 Port
TV:
• Flat-panel TV or Projector with HDMI or VGA (RGB / D-sub 15-pin / PC) port
• TV or audio system with HDMI, 3.5mm audio jack, or RCA connectors
3
“HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks of HDMI
Licensing LLC in the United States and other countries.”
1
Software Installation
1. Insert the CD-ROM and follow the instructions to install the driver software.
2. A new Wireless USB icon will appear in the system tray after the installation.
3. Restart your system for the configuration changes made to fully take effect.
system tray
2
Transmitter Installation
1. Plug the Wireless USB Transmitter to a USB 2.0 port on your computer (the tray icon
will change from Gray to Red ).
2. Please keep the Transmitter in upright position only.
3
Loading...