IOGear GUW2015V User Manual

Installation Guide

Installation

Wireless USB to VGA Kit

GUW2015VKIT

PART NO. M1062

Table of Contents

System Requirements 4

Important Information 5

Package Contents 6

Device Overview 7

Wireless USB Host Adapter 7

Wireless VGA Adapter 8

Wireless VGA Software Installation 10

Wireless VGA Display Settings 19

Wireless USB Manager 24

Wireless USB Host Adapter Settings 26

Wireless USB Host Adapter Selection 28

Wireless USB Host Adapter Reset 29

Wireless VGA Adapter in wired mode 30

Frequently Asked Questions 31

Technical Specications 34

Limited Warranty 36

Federal Communications Commission (FCC) Statement

Contact 38

Appendix 39

Compatibility with GUWH104KIT 39

Cable Association 40

System Requirements

- Microsoft Windows® XP 32-bit (Service Pack 2)

- Microsoft Windows

- USB 2.0 Compliant hardware and system

- Display with VGA port (VGA cable not included)

Vista® 32/64-bit

Important Information

Before you get started, please NOTE:

Do not place Wireless USB devices under direct sunlight or near high heat emitting devices;

Do not place Wireless USB devices near water or wet surfaces to avoid electric hazards;

Do not place Wireless USB devices on any moving or unstable surfaces.

Package Contents

1 x Wireless USB Host Adapter (for PC)

1 x Wireless VGA Adapter (for Monitor/TV/Projector)

1 x USB 2.0 A to mini-B Cable (3 ft.)

1 x USB 2.0 Extension Cable (5 ft.)

1 x Velcro fabric hook-and-loop fastener

1 x Power Adapter

1 x Quick Start Guide

1 x Registration / Warranty Card

1 x Installation CD (with User Manual)

LINK PWR

Device Overview

1. LINK: Data Transfer Activity Indicator LED blinks when data is being transferred

2. PWR: Power LED is solid when powered by the PC

Wireless USB Host Adapter

Wireless VGA Adapter

4 5 6 7

1. VGA : VGA Activity Indicator a. LED is solid when display cable is connected b. LED is blinking when data is being transferred

2. PWR: Power Indicator a. LED is solid when power is applied

3. 1 – 2 – 3: Status Indicator

Single* solid light: device is wirelessly connected to

the selected Wireless USB Host Adapter Single* slowly blinking light: device is searching for b. a Wireless USB Host Adapter Single* quickly blinking light: device is trying to con-c. nect to a Wireless USB Host Adapter Rapidly scrolling lights: device is used in wired d. mode. Three Simultaneous Blinking Lights: Cable As-e. sociation Mode

*Only one light at a time. The position of the light indicates which Wireless USB Host Adapter the device is trying to communicate with.

4. PWR plug

Power adapter socket

5. RESET

Association history can be erased by pressing and

holding this button for 10 seconds

6. HOST

This button is used to select a different Wireless USB Host Adapter

7. USB connector

In wireless mode, this connector is used for cable association

In wired mode, this connector is used for wired operation

8. WIRELESS/WIRED switch

Choose from wired or wireless mode by using this switch

Wireless VGA Software Installation

IMPORTANT NOTE:

If installing on Windows XP, Service Pack 2 (SP2) is required, verify that this has been installed before installing the Wireless VGA kit software.

Before installing the software, please make sure that the Wireless USB Host Adapter and Wireless VGA Adapter are not connected to the computer, and the Wireless VGA Adapter is not powered.

Step 1 – Insert installation CD into drive on your computer.

Step 2 - Select “Software Installation” from the menu.

Step 3 – Choose installation method.

The next screen will let you choose whether you want to install the latest software from the IOGEAR website or if you want to install the software directly from the installation CD.

If selecting Option 2: Download latest software installer from the Web, a web browser window will launch directing you to the IOGEAR website

where you will nd the most up-to-date software.

Once you download the software, double-click on

the .exe le to begin the installation process.

If selecting Option 1: Install directly from CD, the installation will start automatically.

Step 4 –If you previously installed the GUWH104KIT software, then you will be prompted to remove the software from your computer. For more information, please see Appendix.

Step 5 – For Windows XP users, if you do not have Microsoft .NET Framework 2.0 installed, you will be prompted to have it installed.

Click “Yes” to install .NET 2.0 Framework. 1. Check “License Agreement” and click “Install”. 2. Click “Finish” to complete installing .NET Framework 2.0. 3. Restart the computer when prompted.4. Eject your CD and go to Step 1.5.

Step 6 - Wireless VGA kit software installation procedures.

Make sure the Wireless USB Host Adapter is NOT connected to PC, and the Wireless VGA Adapter 1. is NOT powered or connected to any device. Follow the on-screen instructions. 2. Important: reboot if prompted.

Step 7 - Driver Installation for Wireless USB Host Adapter.

Make sure the antenna is connected to the Wireless USB Host Adapter. A.

Plug the Wireless USB Host Adapter to your computer via option 1 or 2. Windows will detect the B.

device and complete the driver installation process automatically.

Option 1:

Plug the Wireless USB Host Adapter into any available USB

2.0 port on your computer.

Option 2:

If using with a Desktop PC, plug the Wireless USB Host Adapter into an available USB 2.0 port utilizing the provided extension cable.

Place the extension cable on a ﬂ at surface, preferably the top of the

desk/work area in order to ensure a good line-of-sight signal with the Wireless VGA Adapter.

LINK PWR

+ 30 hidden pages