IOGear GUH203C User Manual

1. Welcome

Function

Specifications

Ports

External

5 Power Mode

Self (Bus) Powered Output voltage (per port)

+5V DC Output Current (per port)

500mA (max.) Operating Temperature

5 - 40° C (41-104° F) Storage Temperature

-20 - 60° C (-4-140° F) Humidity

0 – 80% RH

Thank you for purchasing IOGEAR's USB PDA/Serial Adapter. IOGEAR brings cutting edge technology of USB to your Macintosh and PC. You will enjoy the convenience and newfound speed that has made this technology an industry standard.

2. Hardware Requirements and Features

• Windows 98SE, 2000, ME, XP

• Available PCI slot

• Available 5.25in. or 3.5in. drive bay

USB 2.0 PCI Card/MiniHub™ Internal Hub Kit

GUH203C USER MANUAL

Read this guide thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit and/or any of devices it connects to:

This package contains:

• 1 USB 2.0 2-port PCI Card

• 1 USB 2.0 3-port 5.25in/3.5in internal hub

• 1 Installation CD

• 1 User Manual

• 1 Warranty /Registration Card

3. Installation of PCI Card

Hardware Installation

! Please take all proper Electro Static Discharge (ESD) precautions during the installation of your new hardware.

• Installing the IOGEAR USB 2.0 PCI Card a) Shut down your computer and turn off the power b) Open your computer case as described within your computer's user's manual c) Locate an available PCI slot d) Per your computer's manual, install the USB 2.0 PCI Card into the available PCI slot e) Close up your computer and plug in all necessary cables

Software Installation

a) Upon rebooting your computer with the IOGEAR USB 2.0 PCI Card for the first time, Windows® will automatically detect your new hardware and a dialog window will appear entitled "New Hardware Found" b) Follow the installation instructions on the screen to its entirety c) Once completed, restart your computer to take full advantage of your new IOGEAR USB 2.0 PCI Card

Note:

Your order has been carefully packaged and inspected, and we hope you are pleased with the IOGEAR product you purchased. Please inspect the contents of the package to ensure that you have received all items and that nothing has been damaged. If you discover a problem, please contact your dealer immediately for assistance.

Contact Information:

(P) 949-453-8782 (F) 949-453-8785 23 Hubble Drive, Irvine, CA 92618 USA www.iogear.com support@iogear.com

4. Installation of Internal Hub

Hardware Installation

! Please take all proper Electro Static Discharge (ESD) precautions during the installation of your new hardware.

• Installing the IOGEAR USB 2.0 Internal Hub a) Shut down your computer and turn off the power b) Open your computer case as necessary as described within your computer's user's manual c) Locate an available 5.25 in. or 3.5 in. drive bay d) Remove necessary screws e) Insert internal USB 2.0 hub into available drive bay f) Secure internal hub into drive bay using two screws on each side g) Connect the cable from the internal hub to the connector on the USB 2.0 PCI card h) Close up you computer case and reinstall necessary screws i) Power up computer and make new connections to the ports

• Product Features

1) 40 Times Faster Then The Original USB

2) Supports High Speed Data Transfer Rates up to 480 Mbps

3) Fully Backward Compatible With USB 1.1

4) Supports Windows® 98SE, 2000, ME,XP

5) 5 external USB Type A Ports

6) Hot Swappable -Plug-N-Play

7) PC Power Management v2.2 Compliant

8) 3-Year Limited Warranty

5. Specifications

• Radio & TV Interference

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation

IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK. OR IT'S DOCUMENTATION.

The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose. The direct vendor also reserves the right to revise or update the device or documentation without obligation to notify any individual or entity of such revisions, or update. For further inquiries, please contact your direct vendor.