IOGear GPS702e3W6 User Manual

Installation

Installation Guide

Installation

eSATA 3Gbps Dual ports Express Card/34 Host

GPS702e3W6

1

PART NO. M0554

Table of Contents

Introduction 4

Features 5

Package Contents 6

Software Installation 7

Federal Communications Commission (FCC) Statement 10

CE Statement 12

Limited Warranty 13

Contact 14

3

Introduction

The ExpressCard Host allows you to upgrade your Notebook computer with up to two SATA II
Channels. The board provides a 2.5Gbps ExpressCard interface on the host side, and dual fully
compliant SATA II 3Gbps ports on the device side to access Serial ATA mobile external and internal
storage devices such as: hard drives, ZIP drives, CD-ROMs, CD-RWs and DVD-ROM drives.

4

Features

External SATA II (eSATA) Connector•
48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB •
Supports 1-lane 2.5Gbps ExpressCard/34•
Hot-plug capability •
Supports SATA II transfer rate of 3.0Gbps•
Fully compliant with Serial ATA 1.0 specifi cations •
Supports two independent Serial ATA channels•
Independent Link, Transport, and data FIFO •
Independent command fetch, scatter/gather, and command execution•
Supports Legacy Command Queuing (LCQ) •
Supports Native Command Queuing (NCQ) •
Supports Non-zero offsets NCQ •
Supports Out of order data delivery NCQ •
Supports FIS-based switching with Port Multipliers•
31 Commands and Scatter/Gather Tables per Port•
Two LEDs indicate for HDD access•
Completely with drivers for Windows NT, Windows 2000, Windows XP, Windows Vista and Windows •
Server 2003

5