IOGear GMP7K Quick Start Manual

Gear Power 7000mAh Mobile Power Station

Quick Start Guide

GMP7K

PART NO. Q31073-b

www.iogear.com

1 x Mobile Power Station
1 x 3’ USB Charging Cable
1 x 5V 1A Power Adapter

1 x Carrying Pouch
1 x Quick Start Guide
1 x Warranty / Registration Card

Package Contents

Overview

Connect the GearPower Mobile Power Station to
a power source using the included Micro USB
cable and power adapter.

1. Plug the USB type A connector into the USB
port of the 5V 1A power adapter. Plug power
adapter into power outlet

2. Insert the Micro USB connector into the Micro
USB port of the Mobile Power Station.

3. The LED charging indicator will light up
“Green” and blink. Once the Mobile Power
Station is fully charged, all four LED charging
indicators will light up solid “Green”.

The USB charging cable can be plugged in to
your computer’s available USB port, however it
will charge at a slower rate than when plugged
into the included 5V 1A power adapter.

Charging GearPower

or

1. USB Type A Female Port (Output: 1A with each port charging, or 2.1A with

only 1 device charging)

2. Micro-USB Female Port (Input)

3. LED Charging/Capacity Indicator

4. Battery Capacity Button

by IOGEAR

5V1A5V1A

IN

5V1A5V1A

IN

2

1

3

4

1