IOGear GME223R User Manual

FRONT

Wireless USB Optical RF Mini Mouse 800

GME223R USER MANUAL

Read this guide thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit and/or any devices it connects to:

This package contains:

• 1 Wireless USB Optical RF Mini Mouse 800

• 1 Carrying case

• 1 USB battery charger cable

• 1 USB extension cable

• 1 User manual

• 2 batteries

• 1 Warranty registration card

4. Other IOGEAR Products

4-D Web Cruiser™ (GME421)

Phaser-RF Wireless Mouse (GME322R)

Hi-Speed USB 2.0 A to B Cable (G2LUAB06)

Hi-Speed USB 2.0 PCI Card (GIC220U)

Hi-Speed USB 2.0 PCMCIA CardBus Card (GPU202)

USB KVMP Switch (GCS1712/GCS1714)

1. Welcome

Congratulations on your new IOGEAR purchase!

IOGEAR's USB RF Wireless Optical Mini Mouse is an excellent tool for mobile professionals. . RF- or 'radio frequency'- is a power-efficient wireless technology that allows you the freedom of a wireless mouse. The small and portable design saves precious space in your mobile work area, and it is one less tangled wire in your laptop carrying case. The ergonomically contoured design and optical sensor offer comfortable use on most surfaces, without the need for a mouse pad.

This mouse features 800 dpi resolution, meaning it offers twice the accuracy of typical mouse movement, which is ideal for graphic designing or any other type of computing where precision matters. This unit is USB ready, Plug-nPlay and hot pluggable.

For added convenience, the RF Mini Mouse also features a power On/Off switch to avoid battery drainage during travel, and a USB charger cable for convenient charging through the USB port on laptops. This mouse is the ultimate tool for the road warrior of today.

For general troubleshooting information, FAQ, and other related documents in our T.I.L. (Technical Information Library), we encourage you to check out our web site -- http://www.iogear.com/support

Contact Information:

23 Hubble Drive Irvine, CA 92618

(P) 949.453.8782 (F) 949.453.8785

www.iogear.com

5. Pictorial Introduction

1. Scroll Wheel

2. Left Click Button

3. Right Click Button

4. Battery Compartment

5. Battery Cover Release

6. Optical Sensor

7. Power On/Off Switch

8. Connect Button

9. Battery Charging Connection

2. Features

• 800 dpi resolution offers twice the accuracy of typical mouse movement

• Operates on most surfaces without the need for a mouse pad

• Works up to 4 feet from your computer and can easily be positioned wherever

it is most comfortable

• Plug-n-Play and Hot Pluggable

• Light and very portable, great for mobile professionals

• Saves precious space in your mobile work area

• Power On/Off switch conserves electricity for maximum battery life

• Comes with a USB charger to allow you to charge batteries through the laptop

• Ergonomically contoured design for comfortable use

• 3 Year Limited Warranty

3. Requirements

• Windows98, 98SE, 2000, ME, XP

• Mac OS X or later (For Mac 9.x or earlier, functions only as a one button mouse)

• Available USB port

6. Installation Instruction

BATTERY INSTALLATION

1. Pull the battery cover release toward the direction as indicated in the drawing

2. Insert the batteries (included in the package) into the battery compartment

3. Put the cover back on.

4. Make sure the power On/Off switch is at ON position. We do recommend that

you charge the batteries for 10 hours before using the mouse.

5. To charge the batteries, just plug the USB charger cable into the USB port on

you computer, and the mouse, and leave it on for a few hours.

2 3 4 5

BACK

WINDOWS

1. Turn on your computer, and let it boot all the way into the operating system

2. Insert the USB receiver into one of the USB port on your computer. You will

see a dialog box, indicating that the computer has detected a new USB device.

For Windows 98/98SE, a dialog box will come up to prompt you to insert the

98/98SE CD into the CD ROM in order to obtain the USB driver. For the

computers where the USB ports are placed in an inaccessable area, you will

need to plug the USB extension cable (included in the package) into the USB

port on the computer, then plug the receiver into the USB extension cable

3. After a few seconds, the light in your mouse will begin to flicker. This is normal,

and should last until the mouse and the receiver are connected.

4. Press the connect button on the mouse, then press the connect button on the

receiver. Press fir mly for 2-3 seconds.

5. After you release the connect button, the mouse is ready for use.

MAC

This mouse is Plug-n-Play for Macs. Just plug the receiver in the USB port, then

press the connect button on both the mouse and the receiver. You will be able to

use the mouse immediately after that.

For the USB Receiver:

10. USB Connector

11. Connect Button

7. Operation

Please avoid using this mouse on glass, mirror and metal surfaces.

Please do not place any other RF unit close to the mouse and its receiver to

avoid interference.

When travelling, please turn the power On/Off switch to the OFF position in

order to save battery life. You do not need to tur n the power off if the mouse is

sitting still, the power consumption will be lowered automatically after you stop

using the mouse for a while.

When the mouse movements turn sluggish, it may be the time for you to

recharge the batteries. Just plug the USB charger cable into the USB port on

you computer, and the mouse, and leave it on for a few hours. You don't need to

turn off the power, and you can use the mouse when it is charging the batteries.

A completely depleted battery requires 10 hours to charge.

Note: The tiny rattling noise you hear when you shake the mouse is normal. This mouse comes with a motion sensor which wakes up the mouse from the power saving mode when you move the mouse. The tiny rattling noise is caused by the motion sensor.

8. Specifications

Function

Battery Type

Frequency Band

Interface

Number of IDs

Operating Range

Power

Resolution

Amps

Voltage

Specification

Ni-Mh

27.015 MHz

USB

2048

4 ft. (1.2m)

< 20mA

2.4 V

800 dpi

Specification

9. Radio & TV Interference Statement

WARNING!!! This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. This equipment has been tested and found to comply within the limits for a class B device, pursuant to Subpart J of Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial environment. Operation of this equipment is a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be required to correct the interference. There is no guarantee that radio frequency interference will not be created in particular locations.

IOGEAR® is not responsible for any radio or television interference caused by unauthorized modification of your mechanism or cables.

10. Limited Warranty

IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT.

The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, perfor mance, merchantability, or fitness for any particular purpose.

The direct vendor also reserves the right to, but not limited to, revise or update the device or documentation without obligation to notify any individual or entity of

such revisions, or updates. For fur ther inquires please contact your direct vendor.